Kenwood KDC-X496 User Manual - Page 18

General operation Auxiliary input display setting You can set the display when switched the AUX source. 1 Select the AUX source Press the [SRC] button. Select the "AUX" display. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the AUX name set item Select the following items using the Control knob. "Settings" > "AUX Name Set" 4 Select the display connected as an AUX source and determine it Turn the Control knob to select the Auxiliary input display, and then press the Control knob. Select "AUX", "DVD", "PORTABLE", "GAME", "VIDEO", or "TV". 5 Exit the Function setting mode Press and hold the [ ] button. Function of KDC-X496, KDC-452U, KMR-550U Muting the audio upon reception of a phone call The audio system automatically mutes when it receives an incoming call. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. When the call ends Hang up the phone. The "CALL" display disappears and the audio system comes back ON. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to (page 12) in Quick start guide. 34 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U Contents Initial settings You can configure initial settings of this unit. 1 Select the Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter the Function setting mode Press and hold the Control knob. 3 Select the Initial settings item Turn the Control knob to select "Initial Settings", and then press the Control knob. 4 Select a desired Initial setting item Turn the Control knob to select an Initial setting item, and then press the Control knob. Display Description "Initial Settings" "SRC Select" Select"2"to change the source selection method. Press the [SRC] button, turn the Control knob to select the source, and then press the Control knob to determine it. 1 / 2 "Key Beep" Setting the operation check sound (beep sound) ON/OFF. "ON" / "OFF" "Function Language" Changes the display language of items displayed in the Function setting mode. "English" / "Français" / "Español" "Built-in AUX" Sets whether to display AUX during source selection. "ON" / "OFF" "CD Read" Sets the method for reading CD. When unable to play a special format CD, set this setting to "2" to force playing. Note that some music CDs may be unplayable even when set to "2". In addition, audio files cannot be played when set to "2". Normally, keep this set to "1". 1: Automatically distinguishes between the audio file disc and music CD when playing a disc. 2: Forces playing as a music CD. "Built-in AMP" Selecting"OFF"turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "ON" / "OFF" "Speaker Select" Sets the speaker type so that the System Q value is optimal. "OFF": OFF "5/4inch": For 5 & 4 in. speaker "6x9/6inch": For 6 & 6x9 in. speaker "O.E.M.": For the OEM speaker "F/W Update" Upgrades the firmware. Selecting"YES"and then pressing the Control knob starts upgrading the firmware. For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ ( : Factory setting) 5 Select an Initial setting and determine it Turn the Control knob to select desired setting, and then press the Control knob. The previous item is displayed. 6 Exit the Function setting mode Press and hold the [ ] button. English | 35