Kenwood KDC-X794 Instruction Manual

Kenwood KDC-X794 Manual

Get Kenwood KDC-X794 PDF manuals and user guides
UPC - 019048187741
View all Kenwood KDC-X794 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KDC-X794 manual content summary:

  • Kenwood KDC-X794 | Instruction Manual - Page 1
    CD-RECEIVER KDC-X994 KDC-BT945U KDC-X794 KDC-MP745U INSTRUCTION MANUAL The latest version of the Instruction Manual can be downloaded from www. kenwood.com/cs/ce/. Before reading this manual, please access this site to check whether your manual is the latest one. Take the time to read through this
  • Kenwood KDC-X794 | Instruction Manual - Page 2
    volume upon reception of Phone call Theft Deterrent Faceplate Audio Adjustments 38 Audio Control 20 Preset Equalizer curve Select Manual Equalizer Control Listening Position Selection Listening Position Fine Adjustments Dual Zone System 2 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 3
    to this unit About USB device About "KENWOOD Music Editor" About the Cell-Phone About the Bluetooth Audio player About Satellite Radio tuner (Optional) About HD Radio Reception (Optional) Menu List Display Indicator items Accessories/ Installation Procedure 69 Connecting Wires to Terminals
  • Kenwood KDC-X794 | Instruction Manual - Page 4
    mode. Refer to (page 7). How to reset your unit If this unit or the connected unit (auto disc changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. Reset button Cleaning the Unit If the faceplate
  • Kenwood KDC-X794 | Instruction Manual - Page 5
    have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manual.) • 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction. English | 5
  • Kenwood KDC-X794 | Instruction Manual - Page 6
    for CD, audio file, and iPod (press the button). To select the remove mode, and remove the USB device or an iPod (press the button at least 2 seconds). 11 [ ] button (KDC-X994/ KDC-BT945U) To enter Bluetooth mode (press the button). [PLAY MODE] button (KDC-X794/ KDC-MP745U) Enters Play mode Menu
  • Kenwood KDC-X794 | Instruction Manual - Page 7
    ("TUNER" or "HD RADIO") ➜ Bluetooth Audio ("BT AUDIO") (KDC-X994, KDC-BT945U only) ➜ USB ("USB") or iPod ("iPod") ➜ CD ("CD") ➜ Auxiliary input ("AUX") ➜ Standby ("STANDBY") ➜ Tuner... Keeping pressing the [SRC] button for at least 1 second turns the power OFF. ⁄ • The SRC Select mode can be set in
  • Kenwood KDC-X794 | Instruction Manual - Page 8
    button. Pause and Play Press the [38] button to pause or resume playback. Remove iPod Press the [38] button for at least 2 seconds. The unit enters the USB REMOVE mode ("USB REMOVE Items Podcasts Genres Composers Display "PDCT***" "GEN***" "COM***" 8 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 9
    or [¢] button. 5 Exit Play Mode Menu KDC-X994 KDC-BT945U Press the [MENU] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button. Remarks • Mode, iPod cannot be operated using this unit. • This mode is not compatible with music information display. The display will show "iPod by Hand Mode
  • Kenwood KDC-X794 | Instruction Manual - Page 10
    Turn the [VOL] knob. Press the [VOL] knob. Press the [4] or [¢] button. Up to 3 characters can be entered. 6 Determine the selected initial Turn the [VOL an", or "the" in the Direct Search mode, it is searched for in defiance of the article. 10 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 11
    Search Searches for music of the same artist or genre as the one being played. 1 Play the music in iPod 2 Press the [SEARCH MODE] button. 3 Enter Related Search mode Turn the [VOL] knob and press it when the desired item is displayed. Select "Related Search". 4 Select the Search item Turn the [VOL
  • Kenwood KDC-X794 | Instruction Manual - Page 12
    Playlist mode. • The ending of a song may be cut unless the song has a silence of 1 second or longer at the end. • Random play cannot be performed during playback of a song in the Playlist. Deleting a Song from the Playlist 1 Press the [SEARCH MODE] button. 12 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC
  • Kenwood KDC-X794 | Instruction Manual - Page 13
    2 Enter Delete Playlist mode Turn the [VOL] knob and press it when the desired item is displayed. Select "Delete My Playlist". 3 Turn the [VOL] knob and press it when
  • Kenwood KDC-X794 | Instruction Manual - Page 14
    Fast Backwards Hold down the [4] or [¢] button. ⁄ • No sound is output while playing audio file. Pause and Play Press the [38] button to pause or resume playback. Remove USB device Press the [38] button for at least 2 seconds. The unit enters the USB REMOVE mode ("USB REMOVE" is displayed.), and the
  • Kenwood KDC-X794 | Instruction Manual - Page 15
    setting Press the [4] or [¢] button. 5 Exit Play Mode KDC-X994 KDC-BT945U Press the [MENU] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button. USB Setting You can select following USB Setting items. 1 Select USB source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL
  • Kenwood KDC-X794 | Instruction Manual - Page 16
    number buttons on the remote control. 3 Search the music Press the [4] or [¢] button. Cancelling Direct Music Search Press the [DIRECT]] button. ⁄ • Direct Music Search cannot be performed during playing of "Music Editor" media, Random play, or scan play. 16 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC
  • Kenwood KDC-X794 | Instruction Manual - Page 17
    Music CD/ Audio file Operation Release MENU VOL DISP SEARCH MODE SRC 4 38 ¢ /PLAY MODE Basic Operation Drop open the faceplate Press the Release button. ⁄ • Push the faceplate on the left side, and return it to its former position. Disc play • A disc inserted. When inserted, the source is switched
  • Kenwood KDC-X794 | Instruction Manual - Page 18
    setting) 4 Make a setting Press the [4] or [¢] button. 5 Exit Play Mode KDC-X994 KDC-BT945U Press the [MENU] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button. Basic Operation of Disc Changer (Optional) Select CD changer source Press the [SRC] button. Turn the [VOL] knob and press
  • Kenwood KDC-X794 | Instruction Manual - Page 19
    number. 1 Enter Direct Disc Search mode Press the [DIRECT] button on the remote control. 2 Enter the disc number Press the number buttons on the remote control. 3 Search the disc Press the [FM] or [AM] button. Cancelling Direct Disc Search Press the [DIRECT] button. ⁄ • Direct Disc Search cannot be
  • Kenwood KDC-X794 | Instruction Manual - Page 20
    when the traffic bulletin starts. (KDC-X994/ KDC-X794 only) "OFF"/ "ON" You can reduce the noise when stereo broadcasts are received as monaural. "OFF"/ "ON" ( : Factory setting) 5 Make a setting Press the [4] or [¢] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and
  • Kenwood KDC-X794 | Instruction Manual - Page 21
    station by entering the frequency. 1 Select the radio band 2 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 3 Enter the frequency Press the number buttons on the remote control. Example: Desired frequency 92.1 MHz (FM) 810 kHz (AM) Press
  • Kenwood KDC-X794 | Instruction Manual - Page 22
    PTY mode Refer to (page 22). 2 Enter Program Type Preset mode Press the [SEARCH MODE] button. 3 Select a desired Program Type in the memory Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. 22 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 23
    of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with BT200 (Optional Accessory) Bluetooth Audio Operation SRC MENU VOL 4 38 ¢ /PLAY MODE Connecting a Bluetooth Device Before use the Bluetooth device, you need to connect Bluetooth device to this unit. Pairing (Registering from Bluetooth devices
  • Kenwood KDC-X794 | Instruction Manual - Page 24
    Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Operation of hands-free phoning SRC MENU VOL SEARCH MODE ⁄ • When registering from this unit, refer to (page 49). • For details on the Bluetooth cell-phone with the handsfree
  • Kenwood KDC-X794 | Instruction Manual - Page 25
    dialing method mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. Speed Dialing (Preset Dial) 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at
  • Kenwood KDC-X794 | Instruction Manual - Page 26
    the lists of calls originated from and received at this unit. They are not the ones stored in the cell-phone memory. Dial a Number 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. 2 Select the number
  • Kenwood KDC-X794 | Instruction Manual - Page 27
    KDC-X794/ KDC-MP745U Make a Voice Dialing Call 1 Enter voice recognition mode voice input. Refer to ( page 74). • Both the name and category require registration of a voice tag. Refer to (page 52). • Audio sound
  • Kenwood KDC-X794 | Instruction Manual - Page 28
    mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Display Setting mode unit is not operated at least 5 seconds Mode" with"OFF"selected, the display turns off. During a setup mode "Manual" KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 29
    Sets whether the key illumination color is changed in conjunction with the sound volume. (KDC-X994 only) "OFF"/ "ON" ( : Factory setting) 5 Make is not displayed Press the [4] or [¢] button to select a setting value. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then
  • Kenwood KDC-X794 | Instruction Manual - Page 30
    5 Make a setting Press the [4] or [¢] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Text Display Selection In FM Tuner source KDC-X994/KDC-X794 : 5-line display mode Frequency & Program Service name ("Frequency/PS") Song title* ("Song
  • Kenwood KDC-X794 | Instruction Manual - Page 31
    input source Source name ("Source Name") Spectrum analyzer & Clock ("Speana/Clock") Date ("Date") Blank ("Blank") In Standby Source name ("Source Name") Date ("Date") Clock ("Clock") Blank ("Blank") In Bluetooth audio source (KDC-X994 /KDC-BT945U only) 5-line display mode Bluetooth audio
  • Kenwood KDC-X794 | Instruction Manual - Page 32
    [¢] button. (red, green, or blue) To adjust color. Turn the [VOL] knob. (Range: 0 - 9) 3. Press the [VOL] knob. Exit the detail color adjustment mode. 5 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. 32 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC
  • Kenwood KDC-X794 | Instruction Manual - Page 33
    and press it when the desired item is displayed. Select the "AUX" display. ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Menu List mode Press the [MENU] button. 3 Enter Auxiliary input display setting mode Turn the [VOL] knob and press it when the desired item
  • Kenwood KDC-X794 | Instruction Manual - Page 34
    clock. Synchronizing the RDS station time data and this unit's clock. (KDC-X994/ KDC-X794 only) "OFF"/ "ON" Sets the date. Sets the date display mode. 1 Enter Menu List mode Press the [MENU] button. 2 Select RDS's automatic time adjustment (KDC-X994/ KDC-X794 only) Turn the [VOL] knob and press it
  • Kenwood KDC-X794 | Instruction Manual - Page 35
    CD. Deletes Favorite Preset Memory. Refer to (page 46). Selecting"OFF"turns off the built-in amplifier. Turning off the built-in amplifier improves the quality of the sound from Preout. "OFF"/ "ON" DSI (Disabled System Indicator) of the unit blinks when the faceplate
  • Kenwood KDC-X794 | Instruction Manual - Page 36
    too much dust or the possibility of water splashing. Reattaching the Faceplate 3 Align the shaft on the unit with the depression on the faceplate. 4 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. 36 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 37
    English | 37
  • Kenwood KDC-X794 | Instruction Manual - Page 38
    at high bit rate, variable bit rate or has minimal high frequency range. The bass and vocal sound of Music CD/ iPod is also supplemented. • Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. 38 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 39
    item is displayed. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • You can select for each source. Manual Equalizer Control You can adjust following Equalizer Control items. KDC-X994/ KDC-X794 Band Item "BAND1"(62.5 Hz) "GAIN
  • Kenwood KDC-X794 | Instruction Manual - Page 40
    button. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. Function of KDC-X994/ KDC-X794 mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Manual position setting mode
  • Kenwood KDC-X794 | Instruction Manual - Page 41
    5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • Select Main source by [SRC] button. • Adjust the page 38) and DSP function are not available. • The Bluetooth audio source can be set exclusively to the front speaker. Set "2Zone Select" to
  • Kenwood KDC-X794 | Instruction Manual - Page 42
    (Car Type: "Minivan", "Minivan (Long)") Speaker Size Subwoofer KDC-X994/ KDC-X794: "None", "6 1/2inch", "8inch", "10inch", "12inch", "15inch Over" KDC-BT945U/ KDC-MP745U: "None", "Small", "Large" ( : Factory setting) 1 Select the source Press the [SRC] button. Turn the [VOL] knob and press it when
  • Kenwood KDC-X794 | Instruction Manual - Page 43
    when the desired item is displayed. Select a source other than "STANDBY". ✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Car Type Adjustment mode Turn the [VOL] knob and press it when the desired item is displayed
  • Kenwood KDC-X794 | Instruction Manual - Page 44
    Reset, all the sources will be the setting value which is registered. • Preset number "1" and "2": The memory cannot be erased by the Reset button. • This function cannot be registered when the iPod Equalizer set in (page 39). 44 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC
  • Kenwood KDC-X794 | Instruction Manual - Page 45
    when the desired item is displayed. Select "YES". "Recall Completed" is displayed. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second, and then press it again briefly. ⁄ • The "User" of (page 39) is changed to the value which was recalled. • The
  • Kenwood KDC-X794 | Instruction Manual - Page 46
    the FAVORITE registration, the list registered in this unit becomes different from that in iPod. In this erased by the Reset button. Retrieving an item registered to Favorite. 1 Enter Favorite Preset Recall mode Press the [FAV] button. 2 Select the . 46 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 47
    Select "YES". "Completed" is displayed. Exit Favorite Preset Memory Delete mode. English | 47
  • Kenwood KDC-X794 | Instruction Manual - Page 48
    Function of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Bluetooth Setup MENU VOL 4 38 ¢ /PLAY MODE Bluetooth Setting You can select following Bluetooth Setting items. 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 49
    need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. ✍✍You can also select from "Settings
  • Kenwood KDC-X794 | Instruction Manual - Page 50
    of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Bluetooth Setup Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC
  • Kenwood KDC-X794 | Instruction Manual - Page 51
    You can delete a registered Bluetooth device. 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press the [PLAY MODE] button for at least 1 second. ✍✍You can also select from "Settings" in Menu List mode. 2 Enter Bluetooth device deletion mode Turn the [VOL
  • Kenwood KDC-X794 | Instruction Manual - Page 52
    of KDC-X994/ KDC-BT945U KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory) Bluetooth Setup Function of KDC-X794/KDC-MP745U press the [VOL] knob. Exit BT Settings mode Press the [PLAY MODE] button for at least 1 second. ⁄ • Audio sound is not output during voice tag registration. 3 Search
  • Kenwood KDC-X794 | Instruction Manual - Page 53
    6 Exit BT Settings mode Press the [PLAY MODE] button for at least 1 second. ⁄ • Set the voice tag for all the 5 categories. If the voice tag is not registered for all the categories, the Phone book may not be recalled by voice command. English | 53
  • Kenwood KDC-X794 | Instruction Manual - Page 54
    BT200 (Optional Accessory) SMS (Short Message Service) Downloading the SMS SMS (Short Message Service) Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. 1 Enter Bluetooth mode KDC-X994 KDC-BT945U Press the [ ] button. KDC-X794 KDC-MP745U Press
  • Kenwood KDC-X794 | Instruction Manual - Page 55
    linked with Bluetooth cannot be displayed. Download the SMS. • The short message cannot be displayed during downloading the SMS. English | 55
  • Kenwood KDC-X794 | Instruction Manual - Page 56
    SRC Select mode 2: Pressing the [SRC] button repeatedly switches source. ⁄ • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if VOL] knob. Cancelling Category and Channel Search mode 56 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 57
    Press the [DIRECT] button on the remote control. ⁄ • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal"/ "No
  • Kenwood KDC-X794 | Instruction Manual - Page 58
    source 2 Enter Menu List mode Press the [MENU] button. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select "Settings". 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. 58 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 59
    to this unit. "0"/"50" Turns ON / OFF the tag memory function of HD Radio receiver. "OFF"/"ON" ( : Factory setting) 5 Make a setting Press the [4] or [¢] button. 6 Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Function of remote control Direct
  • Kenwood KDC-X794 | Instruction Manual - Page 60
    mode: [5]/[∞] • Movement between items during Music search mode: [5]/[∞] • Return to previous item: [ ] • Music select: [4]/[¢] In Satellite Radio tuner source • Preset band select: [FM] • Channel select: [4]/[¢] • Recall preset channels: [1] - [6] 60 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 61
    -free phone control Making a call • Enter Bluetooth mode: [ ] • Select a dialing method: [5 ENT] • Number dial input: Input a digit: [0] - [9] Input "+": [¢] Input "#": [FM] Input "*": [AM] Clear the entered phone number: [4] • Make a call: [DIRECT] Receiving a call • Answer the call: [ ] • Switch
  • Kenwood KDC-X794 | Instruction Manual - Page 62
    be erased depending on the operating conditions of the USB device. We shall have no compensation for any damage arising out of erasure of the stored data. • No USB device comes with this unit. You need to purchase a commercially available USB device. 62 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 63
    ) KDC-X794/KDC-MP745U You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well. For the cell-phones verified for compatibility, access the following URL: http://www.kenwood.com/cs/ce/bt/ ⁄ • The units supporting
  • Kenwood KDC-X794 | Instruction Manual - Page 64
    items appearing when the USB source is selected Display Page "Music" 14 "Play Mode" 15 "File Scan" "Folder Random" "File Repeat" "Folder Repeat" "Settings" - "Skip Search" 15 "Clock & Date" - "DISP & ILLUMI" - "RDS Settings" - 64 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
  • Kenwood KDC-X794 | Instruction Manual - Page 65
    the Music CD/ Audio file source is selected Display Page "Music" 19 "Play Mode" 18 items appearing when an AUX source is selected Display Page "Settings" - "AUX Name Set" 33 "Clock " 50 "Auto Answer" 48 "Bluetooth HF/Audio" "Call Beep" "BT F/W Update" "Mic Gain" "NR Level"
  • Kenwood KDC-X794 | Instruction Manual - Page 66
    " 58 "Receive Mode" 58 "TAG Memory" "Tagging" "Radio ID Watch" "Clock & Date" - "DISP & ILLUMI" - Display Indicator items Source Display Overview General "ATT" Indicates that the attenuator is active. "FAV" Indicates that the Favorite can be registered. iPod/USB/ "CD•IN" Indicates
  • Kenwood KDC-X794 | Instruction Manual - Page 67
    English | 67
  • Kenwood KDC-X794 | Instruction Manual - Page 68
    accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. • Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. 68 | KDC-X994/ KDC-BT945U/ KDC-X794/ KDC
  • Kenwood KDC-X794 | Instruction Manual - Page 69
    *Accessory of KDC-X994/ KDC-BT945U Installation Procedure 1 To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wiring harness
  • Kenwood KDC-X794 | Instruction Manual - Page 70
    Connecting Wires to Terminals To USB device USB connector (1m) Microphone (Accessory5) Microphone input (KDC-X994 / KDC-BT945Uonly) ⁄ Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the
  • Kenwood KDC-X794 | Instruction Manual - Page 71
    Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). Japanese . Removing the Unit 1 Refer to the section and then remove the hard rubber frame. 2 Detach the faceplate. 3 Insert the
  • Kenwood KDC-X794 | Instruction Manual - Page 72
    /Removing the Unit Accessory of KDC-X994/ KDC-BT945U Installation the Microphone Unit 1 Check the installation position of the microphone (accessory 5). 2 Remove oil and other dirt from the installation surface. 3 Install the microphone. 4 Wire the cable up to the unit with it secured at several
  • Kenwood KDC-X794 | Instruction Manual - Page 73
    Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! • Cannot set up the subwoofer. • No output from the subwoofer. • Cannot set up the subwoofer position of Manual position setting. ▲ • T he Dual zone function is enabled. 
  • Kenwood KDC-X794 | Instruction Manual - Page 74
    is activated.  Wire or insulate the speaker cable properly and press the reset button. If the "Protect" code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit can't support. Copy Protection: A copy-protected file is
  • Kenwood KDC-X794 | Instruction Manual - Page 75
    the power and on again. If this message still appears, press the reset button on the control unit. Un Known: The Bluetooth device cannot be detected. Device Full: 5 Bluetooth device have already been registered. No more Bluetooth device cannot be registered. PIN Code NG: The PIN code is wrong
  • Kenwood KDC-X794 | Instruction Manual - Page 76
    28 dBµ (25 µV) Bluetooth section (KDC-X994/ KDC-BT945U) Version : Bluetooth Ver.2.1+EDR Certified Frequency range AVRCP (Audio/Video Remote Control Profile) USB Interface USB Standard : USB1.1/ Signal to Noise ratio (1 kHz) KDC-X994/KDC-X794: 110 dB KDC-BT945U/KDC-MP745U: 105 dB Dynamic range :
  • Kenwood KDC-X794 | Instruction Manual - Page 77
    Preout level / Load (CD) KDC-X994/KDC-X794/KDC-BT945U : 4000 mV/10 kΩ KDC-MP745U: 2500 mV/10 kΩ Preout impedance : ≤ 600 Ω Auxiliary input Frequency response (±1 dB) : 20 Hz - 20 kHz Input Maximum Voltage : 1200 mV Input Impedance : 10 kΩ General Operating voltage KDC-X994/KDC-BT945U (10.5 - 16V
  • Kenwood KDC-X794 | Instruction Manual - Page 78
    This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
CD-RECEIVER
KDC-X994
KDC-BT945U
KDC-X794
KDC-MP745U
INSTRUCTION MANUAL
©
IM305_Ref_en_02_K
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
Serial number
The latest version of the Instruction Manual can be downloaded from www.
kenwood.com/cs/ce/.
Before reading this manual, please access this site to
check whether your manual is the latest one.