Kenwood KDC-X796 Instruction Manual
Kenwood KDC-X796 Manual
 |
View all Kenwood KDC-X796 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KDC-X796 manual content summary:
- Kenwood KDC-X796 | Instruction Manual - Page 1
KDC-BT752HD KDC-X796 CD-RECEIVER INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D'EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain - Kenwood KDC-X796 | Instruction Manual - Page 2
the remote controller (RC-405) Getting Started of Bluetooth 16 Easy Pairing function Registering from Bluetooth devices (Pairing) Operation of Hands-Free Phoning 18 Making a Call Make a Voice Dialing Call Receiving a Call During a Call Call Waiting Clearing the disconnection message Downloading - Kenwood KDC-X796 | Instruction Manual - Page 3
The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment. ■■If you experience problems during installation, consult your Kenwood dealer. ■■When you purchase - Kenwood KDC-X796 | Instruction Manual - Page 4
the unit and faceplate with your fingers. How to reset your unit If this unit fails to operate properly, press the reset 1 button. 2 The unit returns to the factory settings when the reset button is pressed. 3 Reset button If the effectiveness of the remote controller decreases, replace the battery - Kenwood KDC-X796 | Instruction Manual - Page 5
BEEP ON */ OFF: Activates/deactivates the keypress tone. PANDORA ON *: Allows you to select "PANDORA" source by connecting an iPhone, iPod touch, Android or BlackBerry (with the SRC Pandora® internet radio application). ; OFF: Disables "PANDORA" in source selection. BUILT-IN AUX ON *: Enables - Kenwood KDC-X796 | Instruction Manual - Page 6
Basic Operations Remote sensor ■■Do not expose to bright sunlight. Loading slot Ejects the disc TAG VOICE PAR Volume knob Detaches the faceplate The following indicator lights up when... ST: A stereo broadcast is received. HD: HD Radio™ broadcast is tuned in. D: HD Radio digital broadcast is - Kenwood KDC-X796 | Instruction Manual - Page 7
When you press or hold the following button(s)... Main unit Remote controller General operation - ■■Turns on. ■■Turns off if pressed and held. Selects the available sources (HD Radio, BT AUDIO, USB or iPod, PANDORA, CD, AUX, STANDBY), if the power is turned on. SRC • If the source is ready, - Kenwood KDC-X796 | Instruction Manual - Page 8
appears while linking to a multicast channel. ■■The tuning mode can be changed. Refer to (page 9). Direct Access Tuning using the remote controller (RC-405) 1 Press FM+ / AM- to select a band. 2 Press DIRECT repeatedly to select the tuning item. "- - - -" appears. 3 Press DIRECT to enter - Kenwood KDC-X796 | Instruction Manual - Page 9
DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcast only. TAG MEMORY Displays the tag memory usage of the HD Radio receiver. 00 - 50 (Preset: 00): Up to 50 tags can be registered to this unit. Listening to the other external components Preparation : Make sure [ON - Kenwood KDC-X796 | Instruction Manual - Page 10
device or iPod 1 Press SRC to select a source other than "USB", "iPod" or "PANDORA". 2 Remove the USB device or iPod. Selecting Repeat Play Press number button 4 (REP) repeatedly to make a selection. Audio CD : TRACK REPEAT, REPEAT OFF Audio File : FILE REPEAT, FOLDER REPEAT, REPEAT OFF iPod : FILE - Kenwood KDC-X796 | Instruction Manual - Page 11
the iPod or Kenwood Music Editor media. ■■To return to the root folder (audio file), top menu (iPod) or first track (audio CD), press 5. for the music. ■■To cancel the Direct Music Search mode, press or EXIT. Using the remote controller (RC- 405) In playback mode: #FM+ / *AM- : Selects folder. 4 - Kenwood KDC-X796 | Instruction Manual - Page 12
Control iPod from the unit. * You can still control play/pause, select files, fast- forward/reverse files from the unit. Adjust [SETTINGS] mode settings While listening to an iPod or KENWOOD the instruction manual that came with your disc writing software or your disc recorder.) ■■3-inch CD cannot - Kenwood KDC-X796 | Instruction Manual - Page 13
) About "KENWOOD Music Editor" ■■This unit supports the PC application "KENWOOD Music Editor Instruction manual, the term "Music Editor media" is used to mean the device ■■Connecting a cable whose total length is longer than 5 m can result in abnormal playback. ■■This unit cannot recognize a USB - Kenwood KDC-X796 | Instruction Manual - Page 14
to Pandora® internet radio TAG VOICE PAR iPod Press to skip a song. Press to select thumbs down/up. USB terminal Press to pause. Press again to resume playback. Android or BlackBerry Preparation : ■■You need to register your cell-phone before using it with this unit. (page 16) ■■Disconnect the - Kenwood KDC-X796 | Instruction Manual - Page 15
station, then press to confirm. Using the remote controller (RC- 405) In playback mode: +¢ Android™ or BlackBerry® --Download the Pandora application to your smartphone from Pandora site using it's standard browser. --Bluetooth must be built in and the following profiles must be supported - Kenwood KDC-X796 | Instruction Manual - Page 16
DVC" is displayed, confirm connection with a Bluetooth device operation. 7 The receiver is connected to a Bluetooth device, with "HF CONNECT" or "AUD CONNECT" displayed, and exits the easy pairing mode. ■■If an error code is displayed during paring, see (page 32). ■■If the error - Kenwood KDC-X796 | Instruction Manual - Page 17
book Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) For the cell-phones verified for compatibility, access the following URL: www.kenwood.com/cs/ce/bt/ ■■The units supporting the Bluetooth function have been certified for conformity with the - Kenwood KDC-X796 | Instruction Manual - Page 18
Preparation : You need to register your cell-phone before using it with this unit. (page 16) Built-in microphone (KDC-BT752HD only) TAG VOICE PAR iPod ■■Press to enter Bluetooth mode. ■■Press to answer an incoming call. ■■Press and hold to memorize the current phone number. ■■Press briefly - Kenwood KDC-X796 | Instruction Manual - Page 19
remote controller. 4 Press the volume knob to make a call. ■■Press OK on the remote controller. SUPPORT" is displayed, your cell-phone does not support the Receiving a Call Answering a Phone Call Press or the volume knob. ■■The following operations disconnect the line: --Insert a CD. --Connect a USB - Kenwood KDC-X796 | Instruction Manual - Page 20
disconnection message Press to "HF DISCONCT" disappears. Downloading the Phone Book To download automatically If the cell-phone supports a phone book synchronization function, the phone book is downloaded automatically after Bluetooth remote controller (RC- 405) Making a call: : Enter Bluetooth - Kenwood KDC-X796 | Instruction Manual - Page 21
that do not support AVRCP (Audio/Video Remote Control Profile) cannot be used with this unit. Operate from the audio player. ■■Some functions cannot be operated from the Bluetooth audio player. ■■Speakers from which audio is output change depending on the Bluetooth setting "BT HF/AUDIO". The default - Kenwood KDC-X796 | Instruction Manual - Page 22
knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to select [PAIRING], then press to enter. 4 Turn the volume knob to select [DEVICE SEARCH], then press to enter. Search for the Bluetooth device. When search is completed, "FINISHED" is displayed. 5 Turn the volume knob to select - Kenwood KDC-X796 | Instruction Manual - Page 23
to this unit ■■"HF CONNECT": Hands-free phoning ■■"AUD CNT": Audio playback ■■"PB DL": Phone Book downloading 7 Press to exit pairing mode. ■■Data (Phone Book, etc.) of the cell-phone checked for connection does not remain in this unit. Bluetooth Setup 1 Press to enter Bluetooth mode. 2 Turn the - Kenwood KDC-X796 | Instruction Manual - Page 24
reconnects the selected Bluetooth device when radio wave becomes strong enough, even after it is disconnected. ; OFF: Cancels. ■■When this function is turned ON, the Bluetooth device is reconnected if it has been disconnected by selecting [PHONE SELECT]/ [AUDIO SELECT]. BT HF/AUDIO FRONT - Kenwood KDC-X796 | Instruction Manual - Page 25
USER] is selected, a message is displayed. Press the volume knob again. 6 Hold to finish the procedure. Creating an original message 1 Press to enter Bluetooth remote controller. 7 Press the volume knob to confirm. 8 Hold to finish the procedure. SMS Setup 1 Press to enter Bluetooth is received from - Kenwood KDC-X796 | Instruction Manual - Page 26
. [AUDIO CONTROL] : While listening to any source except in STANDBY state or Bluetooth mode. Item the source you want to adjust.) TRE LEVEL EQ PRO KDC-X796 only BASS ADJUST BASS CTR FRQ 60/ 80/ 100 */ the level. PRESET EQ NATURAL */ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects a preset - Kenwood KDC-X796 | Instruction Manual - Page 27
a USB device, except iPod.) (Selectable only if "CD"/ "USB" CLOCK CLOCK ADJUST (For details, see page 5.) TIME SYNC ON: Synchronizes the Radio Data System station time data and the unit's clock. ; OFF *: Cancels. DISP&KEY COLOR SELECT VARIABLE SCAN * / COLOR 01 - 24/ USER Bluetooth device. HF- - Kenwood KDC-X796 | Instruction Manual - Page 28
Part list: A Faceplate 1) B Escutcheon 1) C Mounting sleeve 1) D Wiring harness 1) E Removal tool 2) F Flat head screw (for Nissan cars 4) G Round head screw (for Toyota cars 4) H Microphone (3 m) (KDC-X796 only)B 1) Basic procedure 1 Remove the key from the ignition switch, then disconnect - Kenwood KDC-X796 | Instruction Manual - Page 29
Mounting and wiring this product requires skills and experience. For safety's sake, leave this work to professionals. If you experience problems during installation, consult your Kenwood dealer. ■■Reception may become poor if there are metal objects near the Bluetooth antenna. iPod Bluetooth antenna - Kenwood KDC-X796 | Instruction Manual - Page 30
Wiring connection USB connector AUX input (Stereo) Use the mini-plug (3.5 mm; 1/8") cable which is stereo type and does not have any resistance. FM/AM antenna input (JASO) Antenna Cord Fuse (10A) Wiring harness D Rear output R L Front output Sub Woofer output Microphone H (KDC-X796 only) - Kenwood KDC-X796 | Instruction Manual - Page 31
(Wider hooks on the bottom side.) Connect the wiring harness to the C unit. Other wiring connection has been completed earlier. (page 30) MAX. G ø5mm T: Toyota cars N: Nissan cars Removing the unit 1 Detach the faceplate A. 2 Engage the catch pin on the removal tools E into the holes on both - Kenwood KDC-X796 | Instruction Manual - Page 32
tape properly, then reset the unit. If "PROTECT" does not disappear, consult your nearest service center. Reset the unit. Connect the antenna firmly. / Pull the antenna out all the way. The tag memory of HD Radio receiver is full. The connected iPod does not support iTunes tagging function - Kenwood KDC-X796 | Instruction Manual - Page 33
reset button on the unit. If the "ERROR 99" code does not disappear, consult your nearest service center. "COPY PRO" appears. A copy-protected file is played. "READ ERROR" appears. Copy the files and folders for the USB not support the Pandora® application on the iPhone/iPod touch. Bluetooth - Kenwood KDC-X796 | Instruction Manual - Page 34
into the microphone a little more been registered (pairing). "HF DISCONCT" appears. reset button on the control unit. "HF ERROR 89" appears. Update of the Bluetooth firmware has failed. Retry it. "UNKNOWN" appears. The Bluetooth device cannot be detected. "DEVICE FULL" appears. 5 Bluetooth - Kenwood KDC-X796 | Instruction Manual - Page 35
/Video Remote Control Profile) Audio section Maximum output power: 50 W × 4 Full bandwidth power (at less than 1 % THD): 22 W × 4 Speaker impedance: 4 Ω - 8 Ω Tone action: Bass: 100 Hz ±8 dB Middle: 1 kHz ±8 dB Treble: 12.5 kHz ±8 dB Preout level / load (CD): KDC-X796: 4,000 mV/ 10 kΩ KDC-BT752HD - Kenwood KDC-X796 | Instruction Manual - Page 36
FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized - Kenwood KDC-X796 | Instruction Manual - Page 37
sounds like a CD. ■■ Program Service Data: Contributes to the superior user experience of HD Radio Technology. Presents song name, artist, station IDs, HD2/HD3 Channel Guide, and other relevant of content and the means to "tag" that content for later review and purchase from the iTunes® Store. - Kenwood KDC-X796 | Instruction Manual - Page 38
. Attention: Vous aurez besoin de cette carte et du rec;u (ou de Ia facture) pour acheter un nouveau panneau en cas devol ou d'endommagement. Aten~io: Em caso de dano ou perda do painel frontal, este Certificado de Garantia e a Nota Fiscal de compra serao requisitados para a aquisic;ao de um novo - Kenwood KDC-X796 | Instruction Manual - Page 39
instructions supplied with the product. d. Repair or attempted repair by anyone not authorized by Kenwood. e. Any other cause which does not relate to a product defect. KENWOOD USA CORPORATION WHO IS PROTECTED KENWOOD Authorized Dealer or Authorized Service Center. If the problem o manual de - Kenwood KDC-X796 | Instruction Manual - Page 40
or lack of periodic maintenance, unauthorized modification or failure to follow instructions in the owner's manual. (f) Defects or damage as a result of repairs performed by a person or party not authorized by KENWOOD. (g) Defects resulting from the use of parts or devices that do not conform to - Kenwood KDC-X796 | Instruction Manual - Page 41
parts. • Misuse, abuse, neglect, unauthorized product modification or failure to follow instructions contained in the Owner's Manual. • Accidental or intentional damages. • Repairs or attempted repairs by an unauthorized agency. (All repairs must be performed at an authorized Kenwood Service
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
KDC-BT752HD
KDC-X796
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
B64-4935-00/01 (KW)
©
2011 JVC KENWOOD Corporation
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from
your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the
space provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for
information or service on the product.
Model KDC-BT752HD/ KDC-X796
Serial number
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com