Kenwood KPA-H2CFM Installation Guide
Kenwood KPA-H2CFM - FM Car Installation Manual
 |
View all Kenwood KPA-H2CFM manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KPA-H2CFM manual content summary:
- Kenwood KPA-H2CFM | Installation Guide - Page 1
KENWOOD S R USt Here2Anywhere KPA-H2CFM Car Docking Kit Installation Guide - Kenwood KPA-H2CFM | Installation Guide - Page 2
recommends that you retain the original carton and packing materials in case you need to ship your KPA-H2CFM in the future. 2 KPA-H2CFMFM Installation Guide - Kenwood KPA-H2CFM | Installation Guide - Page 3
or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authorization to operate this equipment if an unauthorized change or modification is made. 3 - Kenwood KPA-H2CFM | Installation Guide - Page 4
KENWOOD Installation in a vehicle Note: Do not put Here2Anywhere in the cradle until you have completed the installation. 1. Determine where you want to mount 2. The leaves on the base can be bent to Here2Anywhere. conform to curved mounting surfaces. • Do not install Here2Anywhere where it may - Kenwood KPA-H2CFM | Installation Guide - Page 5
KENWOOD ns Ilation In a vehicle (continued): 3C.If your car stereo has an aux input, you can connect Here2Anywhere directly to it instead of using the FM transmitter. Plug the supplied audio cable into the back of the cradle, as shown; plug the red and white connectors into your car stereo. 4. - Kenwood KPA-H2CFM | Installation Guide - Page 6
off and remove it from the cradle; unplug the cigarette lighter adapter from the cigarette lighter; unplug the antenna from the cradle. 6 KPA-H2CFM Installation Guide - Kenwood KPA-H2CFM | Installation Guide - Page 7
KENWOOD 4. Remove the yellow protective backing from the adhesive strip and firmly adhere it to the underside of the antenna tail. (Do not remove the red protective backing at this time.) 5. Once the strip is adhered to the tail, remove the red protective backing from the adhesive and firmly adhere - Kenwood KPA-H2CFM | Installation Guide - Page 8
KENWOOD www.kenwoodusa.com www.kenwoodusa.com/Inquiry 1-800-KENWOOD Main Office P.O. Box 22745 Long Beach, CA 90801-5745 ©2003 Kenwood USA Corporation. All Rights Reserved. 0021-0403-H2CFM INST
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
KENWOOD
Here
2
Anywhere
S
R
USt
KPA-H2CFM
Car
Docking
Kit
Installation
Guide