Kenwood KSC-32S Instruction Manual
Kenwood KSC-32S Manual
 |
View all Kenwood KSC-32S manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KSC-32S manual content summary:
- Kenwood KSC-32S | Instruction Manual - Page 1
RAPID CHARGER KSC-32S INSTRUCTION MANUAL B62-2331-40 (T) Thank you for purchasing this charger. This product will offer years of reliable service when used to charge the specified battery packs. Features • Capable of charging Li-ion and Ni-MH battery packs when either attached to or removed - Kenwood KSC-32S | Instruction Manual - Page 2
. Check your transceiver Instruction Manual to confirm whether this charger is suitable for your battery pack. ◆ If the battery pack contacts are not properly mated with the charger terminals, the indicator may flashing red or may remain unlit. To resolve this problem, reinsert the battery
-
1 -
2
 |
 |
CHARGING PROCEDURE
Do not use in explosive atmospheres (gases, dust, fumes, etc.).
ATTENTION:
Always switch OFF a transceiver equipped with a
battery pack before inserting the transceiver into the charger.
1
Plug the AC adapter cable into
the adapter jack located on the
rear of the charger.
2
Plug the AC adapter into an AC outlet.
3
Slide a battery pack or a
transceiver equipped with
a battery pack into the
charging slot.
•
Make sure the metal
contacts of the battery
pack mate securely with
the charger terminals.
•
The indicator lights red
and charging starts.
4
When charging is completed, the indicator flashing green.
Remove the battery pack or the transceiver from the charging
slot.
•
When the charger will not be used for a long time, unplug
the AC adapter from the AC outlet.
Approximate Charging Times
Battery Pack
Voltage
Charging Time
KNB-33L
7.4 V
140 minutes
KNB-47L
7.4 V
140 minutes
KNB-48L
7.4 V
170 minutes
KNB-54N
7.2 V
170 minutes
KNB-L1
7.4 V
150 minutes
KNB-L2
7.4 V
180 minutes
KNB-L3
7.4 V
240 minutes
KNB-N4
7.2 V
170 minutes
F
or other battery packs, please contact your dealer or refer to the
catalog of the transceiver.
Charger Status Table
Indicator Color
Meaning
Red
A battery pack is in the battery pack slot and
charging has started.
Flashing Red
The battery pack is defective or the battery
pack contacts are not properly mated with
those of the charger.
Flashing Green
Charging is completed; remove the battery
pack from the charger.
KSC-32S
INSTRUCTION MANUAL
RAPID CHARGER
Thank you for purchasing this charger. This product will offer years
of reliable service when used to charge the specified battery packs.
FEATURES
•
Capable of charging Li-ion and Ni-MH battery packs when
either attached to or removed from the transceiver.
•
Easy to use design allows you to start charging by simply
sliding the battery pack into the charging slot.
•
Overcharge protection. Protects against reduced battery pack
life caused by excessive charging.
After the rapid charge
cycle has finished, the charger automatically switches to trickle
charge (Ni-MH).
•
Dual-color indicator informs you of the current charging status.
SUPPLIED ITEMS
Charger (W0B-0078-XX)
.......................................................
1
AC adapter (W0H-0058-XX)
..................................................
1
Instruction manual (B62-2331-XX)
........................................
1
APPLICABLE BATTERY PACKS
Charge only the battery packs listed below.
Other types of
batteries may burst, causing personal injury.
•
Ni-MH: KNB-54N
KNB-N4
•
Li-ion:
KNB-33L
KNB-47L
KNB-48L
KNB-L1
KNB-L2
KNB-L3
ORIENTATION
SPECIFICATIONS
AC Voltages
100 - 240 V
Dimensions (W x H x D)
<charger only>
102 x 56.4 x 131.5 mm
4.02 x 2.22 x 5.18 in
Weight <charger only>
Approx. 190
g
/ 6.7 oz
ATTENTION:
Check the rating label attached to the bottom of the
charger for other important specifications.
B62-2331-40 (T)
© 2019
Charging slot
Slide a battery pack or a transceiver
equipped with a battery pack into this
slot.
AC adapter jack
Plug in the supplied AC adapter here.
Dual-color Indicator
Informs you of the current charger
status.