Kenwood KVT 512 Instruction Manual

Kenwood KVT 512 - DVD Player With LCD monitor Manual

Get Kenwood KVT 512 - DVD Player With LCD monitor PDF manuals and user guides
UPC - 019048177155
View all Kenwood KVT 512 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood KVT 512 manual content summary:

  • Kenwood KVT 512 | Instruction Manual - Page 1
    MONITOR WITH DVD RECEIVER KVT-512 KVT-532DVD INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD Receiver For your records Record the serial number, found on the
  • Kenwood KVT 512 | Instruction Manual - Page 2
    Contents How to read this manual 4 Basic Operations 10 Before Use 6 Notes 7 Navigation Control 16 Using the Navigation System 16 Control of Other Sources While Displaying the Navigation Screen 16 Watching DVD/VCD 18 Functions During the Playback Screen 18 Functions When Displaying
  • Kenwood KVT 512 | Instruction Manual - Page 3
    Bluetooth Unit 79 Bluetooth Unit Connection 80 Deleting Bluetooth Unit 80 Software Information 81 Setup Memory 82 Audio Control 84 Audio Control Menu 84 Audio Control 84 Equalizer Control 85 Tone Setup 86 Zone Control 86 Remote Controller 88 Battery installation 88 Remote
  • Kenwood KVT 512 | Instruction Manual - Page 4
    MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after another. Switches to the next frequency manually. Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in memory 2 Store in memory 4 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 5
    English 5
  • Kenwood KVT 512 | Instruction Manual - Page 6
    accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters conforming to ISO 8859-1 character set can be displayed. • The RDS or RBDS feature won't work where the service is not supported by any broadcasting station. 6 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 7
    For how to update the software, refer to the instruction manual of the navigation unit. iPod that can be connected to this unit You can control an iPod from this unit by connecting an iPod (commercial product) with Dock connector using an optional accessory iPod connection cable (KCA-iP300V ). The
  • Kenwood KVT 512 | Instruction Manual - Page 8
    first setout is played. • Playable disc media CD-R/RW/ROM, DVD±R/RW • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device USB mass storage class, iPod with KCA-iP300V • Playable USB device file system FAT16, FAT32 Although the
  • Kenwood KVT 512 | Instruction Manual - Page 9
    depending on the location where the DVD is playing. In this case, the following marks will appear on the screen. For more information, refer to the disc manual. Pr‫ې‬ohࢭibiϚtioʔn MΫark Discs with limited period of use Do not leave discs with a limited period of use in this unit. If you load
  • Kenwood KVT 512 | Instruction Manual - Page 10
    , the monitor movement is also canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] button again. 10 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 11
    held down for 1 second or more, the power is turned off. F Sets the Loudness Press it for more than 1 second to turn the Loudness function desired item. ⁄ • See (page 7) for a list of supported discs and formats. Removing a disc Press [0] (Eject) button. D Play/ Pause Press
  • Kenwood KVT 512 | Instruction Manual - Page 12
    contents in the USB device is changed. • Make sure that the USB device is connected firmly. Removing the USB device Press on the USB control screen to enter the USB suspend mode, and then remove the USB device. Refer to (page 36). ¤ • Removing the USB device before
  • Kenwood KVT 512 | Instruction Manual - Page 13
    Audio Control Menu screen. (page 84) 6 Displays the Setup Menu screen. (page 58) 7 Adjusts the volume. 9 8 Clock display 9 Displays the Full Source Select screen. ⁄ • For how to register the frequently used source buttons to Favorite Source Select screen see (page 67
  • Kenwood KVT 512 | Instruction Manual - Page 14
    to resume the normal display. C Switches to the Navigation system Press the button to switch the display to the navigation system screen. C Switches to the rear view Press it for Display Off function. See (page 62) for the function setting of the [NAV] button. 14 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 15
    the following order each time you press the button. Navigation screen [FNC] button Easy Control buttons appear. Picture or Video playback screen [FNC] button Easy Control buttons appear. Navigation screen Picture or Video playback screen DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI Easy
  • Kenwood KVT 512 | Instruction Manual - Page 16
    control buttons When "DVD" is selected: 2 Setting the navigation system function Touch the navigation system button displayed on the screen. See the included NAVIGATION SYSTEM's INSTRUCTION MANUAL for information on using the navigation system. ⁄ • You can set the navigation system function when
  • Kenwood KVT 512 | Instruction Manual - Page 17
    iPod" is selected: 7 7 8 9 7 During iPod play : Searches Music or Video. During USB play : Selects a file. 8 Plays or pauses. 9 When touched this area, the source control screen touched this area, the source control screen appears. When "SIRIUS" or " control screen appears. When "Bluetooth" is
  • Kenwood KVT 512 | Instruction Manual - Page 18
    You can play DVD/VCD using various functions. • For the basic method of how to watch DVD/VCD, see (page 10). • Set the remote controller mode switch to "DVD" mode before starting operation, see (page 88). Functions During the Playback Screen Basic
  • Kenwood KVT 512 | Instruction Manual - Page 19
    when you play it in the next time. 3 Plays or pauses. ⁄ • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI
  • Kenwood KVT 512 | Instruction Manual - Page 20
    when VCD Ver 2.0 is in use) ; Appears when PBC is On. a VCD version indicator DVD Disc Menu Selects an option from the DVD Disc Menu. 1 Display the Disc Menu Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N DVD VIDEO Title 1 C h a p 1 T 0 0 : 0 0 : 0 5 MenuCtrl 3 3 6 1 5 Top Menu
  • Kenwood KVT 512 | Instruction Manual - Page 21
    Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. MenuCtrl Top Menu Return En t e r Highlight Canc e l Ex i t H i g h l i gh t On ⁄ • To cancel Highlight Control, press [FNC] button. 2 Select Disc Menu
  • Kenwood KVT 512 | Instruction Manual - Page 22
    AV - O U T: AV - I N DVD VCD PBC Scene VER2 ST 3 IN P 00:05 AF Z o omC t r l 2 2 2 1 Z o om x 2 2 3 Ex i t 1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. 22 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 23
    See (page 8) for playable files. Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions. or [DVD] button on the "Source Select" screen 5 Music information display Selects the Disc Text or Track Text. When is appeared
  • Kenwood KVT 512 | Instruction Manual - Page 24
    number of lines displayed in the Information Display. v Function Indicator 24 KVT-512/KVT-532DVD b MUSIC, MOVIE or PICTURE indicator n Appears when a disc played, initial background is displayed. For information on setting the image display time, see (page 62). . You can search for
  • Kenwood KVT 512 | Instruction Manual - Page 25
    after approximately 5 seconds. Also, the information can be displayed automatically when it is updated. or [DVD] button on the "Source Select" screen DVD MEDIA 4 Mode:Full 5 AV - O U T: AV - I N 3 6 DVD MEDIA 1 2 2 1 P 00:00:05 IN 1 Folder/File Number Display 2 Play Time Display
  • Kenwood KVT 512 | Instruction Manual - Page 26
    Control Panel is hidden when you touch a central part of the monitor. DVD MEDIA Mode:Full AV - O U T: AV - I N SCRN TI DVD MEDIA 2 1 P 00:00:05 PICTURE IN 1 2 3 6 9 12 13 7 7 10 11 14 17 11 15 16 18 19 4 5 8 9 20 26 KVT-512/KVT-532DVD 21 22 23 1 Switches to the playback
  • Kenwood KVT 512 | Instruction Manual - Page 27
    played, initial background is displayed. For information on setting the image display time, see (page 62). s You can search for folders Control Adjusting the video display. 1 Start Picture Control DVD MEDIA Mode:Full AV - O U T: AV - I N DVD MEDIA 2 1 P 00:00:05 IN 2 Adjust
  • Kenwood KVT 512 | Instruction Manual - Page 28
    Set the remote controller mode switch to "AUD" mode before starting operation, see (page 88). Functions While Displaying the Control Screen Switches to the source control screen to use or (page 30). t Sets a name to the station. See
  • Kenwood KVT 512 | Instruction Manual - Page 29
    ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. The mode is switched in following order each time you touch the button. Display "AUTO1" "AUTO2" "MANU" Setting Tunes in a station with good reception automatically. Tunes in stations in memory one after
  • Kenwood KVT 512 | Instruction Manual - Page 30
    stations with good reception in memory automatically. 1 Select a band you wish to store in memory Manual Memory Stores the current receiving station in memory. 1 Select a station you wish to store in The operation ends automatically if you do not operate within 10 seconds. 30 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 31
    name 2 Start Name set 1 2 2 3 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by pressing it. 2 Scrolls the text display. 3 Returns to the previous screen
  • Kenwood KVT 512 | Instruction Manual - Page 32
    screen appears automatically. Traffic Information screen ⁄ • It is necessary to have Traffic Information function set to On in order to have the Traffic Information screen selected program type. 5 Returns to the previous screen. 3 Search a station of the selected Program Type 32 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 33
    on the video screen. • While connecting an iPod, "KENWOOD" appears on the iPod and the iPod's control is disabled. iPod Mode:Full AV - O U T: AV - I N SCRN TI 1 1 iPod 2 P 00:00:05 IN . 1 Music/Video Search. 2 Plays or pauses. ⁄ • When the navigation screen is displayed, press
  • Kenwood KVT 512 | Instruction Manual - Page 34
    Displaying the Control Screen Switches to the source control screen to use various playback functions. When Video or picture is playing, press the [FNC] button. iPod SCRN TI iPod or Mode:Full AV - O U T: AV - I N P 00:00:05 IN [iPod] button on the "Source Select" screen 1 2 6 9 10 11 12
  • Kenwood KVT 512 | Instruction Manual - Page 35
    1 20 20 19 21 22 23 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by
  • Kenwood KVT 512 | Instruction Manual - Page 36
    button Functions While displaying the Control Screen Switches to the source control screen to use various playback functions. When Video or part of the monitor. USB Mode:Full AV - O U T: AV - I N SCRN TI USB or 0002/0006 P 00:00:05 IN [USB] button on the "Source Select" screen 36 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 37
    played, initial background is displayed. For information on setting the image display time, see (page 62). i Displays the folder list. 18 19 20 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. 2 Track Number Display 3 Play
  • Kenwood KVT 512 | Instruction Manual - Page 38
    played. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Moves to the top category. 6 Displays the currently playing file. 38 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 39
    Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner,
  • Kenwood KVT 512 | Instruction Manual - Page 40
    Sirius/XM Control (North American sales area only) Channel Search Specifying the desired category and selecting a channel. 1 Start Channel Search Channel Memory Stores the the display from Channel Name, Category Name, Song Title, Artist Name, to Composer Name. (Sirius only) 40 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 41
    Direct Channel Search Tuning in by entering the desired channel number. 1 Start Direct Channel Search 2 Enter the channel number 1 2 3 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. 3 Tune in the channel  : Press for # seconds. English 41
  • Kenwood KVT 512 | Instruction Manual - Page 42
    screen to use various functions. [Bluetooth] button on the "Source Select" screen 3 1 2 4 4 1 Plays. 2 Pauses. 3 Stops playing. 4 Selects a file. ⁄ • If the Bluetooth Audio player does not support AVRCP profile, buttons 1 to 4 are not displayed. Operate from the Audio player. 42 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 43
    and system is paused. Phone Call ("CALL") screen When the call ends... Hang up the phone. The system resumes playing automatically. ⁄ • To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to . English 43
  • Kenwood KVT 512 | Instruction Manual - Page 44
    you select the Set Station Name mode or others, the following screen appears for character entry. How To Use the Character Entry Screen Character Entry screen 1 1 3 returns to the previous screen. ⁄ • You can enter characters only after you have applied the parking brake. 44 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 45
    displayed only when you have applied the parking brake. • The picture quality can be set for each source. • You can set image quality of screens such as menu from (page 70) of the . 2 Display the Screen Control screen DVD VIDEO Mode:Full AV - O U T: AV - I N SCRN TI
  • Kenwood KVT 512 | Instruction Manual - Page 46
    in the Hands Free control mode. (with the optional accessory Bluetooth unit connected only) • You need to register your cell-phone to your Bluetooth Unit beforehand. Make sure to read the instruction manual of the Bluetooth Unit as well • To use the Phonebook, it must have been downloaded from the
  • Kenwood KVT 512 | Instruction Manual - Page 47
    is displayed if information about it cannot be obtained. • Setting the cell-phone in the private mode can disable the hands-free call, you can use the handsfree phone. 1 Respond to a call 3 1 2 4 When a call arrives, the Talking screen appears automatically. -based Services> (page 49). English 47
  • Kenwood KVT 512 | Instruction Manual - Page 48
    for the entered phone number. See (page 57). 3 Clears the number. 4 Returns to the previous screen. 3 Make a call You can start talking when the destination responds. 4 End the call The Hand Free screen reappears. ⁄ • You can input max 32 digits. 48 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 49
    Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). 1 Display the DTMF input screen Display the Talking screen. See (page 48). Calling by Phonebook You can call a person using his/her phone number that you have
  • Kenwood KVT 512 | Instruction Manual - Page 50
    phone number. See (page 57). y Scrolls the phone number. u Returns to the Name List screen. 5 Make a call ⁄ • To use the Phonebook, it must have been downloaded from the cell-phone. For more details, see the instruction manual of your Bluetooth Unit and your cell-phone
  • Kenwood KVT 512 | Instruction Manual - Page 51
    appears. 2 Select from calls list Example : Outgoing Calls screen 1 3 4 2 5 2 6 1 Outgoing Calls list. 2 Scrolls the list. 3 Makes a call to the selected number. 4 Creates an SMS for the selected phone number. See (page 57). 5 Displays the detail of the selected
  • Kenwood KVT 512 | Instruction Manual - Page 52
    displayed phone number. 5 Creates an SMS to the displayed address. See (page 57). 6 Selects the Phone number category. 7 Scrolls the phone number. 8 Returns to the previous screen. 4 Make a call If the voice recognition is succeeded and there is only one phone number
  • Kenwood KVT 512 | Instruction Manual - Page 53
    the Hands Free Setup screen 2 Setup each item 1 2 3 4 5 6 7 8 9 10 11 12 1 Moves to the "Hands Free Setup 2" screen. 2 Sets an automatic response time after call termination. ( "8") "Off": This function can not use. "0-99": Sets to calling ring time (second). 3 Sets a ringing tone output
  • Kenwood KVT 512 | Instruction Manual - Page 54
    "REC" turns on for data with voice for voice recognition already registered. 2 Display the voice registration screen 5 End voice registration ⁄ • A message is displayed if the voice is not recognized. Read the 2 seconds after the Beep. 4 Utter the voice to register (2nd try) 54 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 55
    Recognition. 1 Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See (page 46). 2 Select the confirmation screen. Touch [YES] to delete or [NO] to cancel. 5 Returns to the Hands-Free Set Up screen. 3 Display voice registration screen ⁄
  • Kenwood KVT 512 | Instruction Manual - Page 56
    used phone number to Hands Free control screen preset button. 1 Display the Hands Free Preset List screen Display the "Hands Free" screen and touch [Setup]. See
  • Kenwood KVT 512 | Instruction Manual - Page 57
    Service) Uses SMS function. 1 Display the SMS Select screen 2 Select a function 1 2 3 4 5 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen Changes keyboard character type. i Sends the message. o Sets the key layout of the character buttons. abc :
  • Kenwood KVT 512 | Instruction Manual - Page 58
    front speakers. "Standard": Setup for general diameter speakers "Narrow": Setup for small diameter speakers "Middle": Setup for middle diameter speakers "Wide": Setup for large diameter speakers 4 Switches to the crossover setup screen. See (page 59). 58 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 59
    Setup" screen. DVD Setup You can set up the DVD play. 1 Display the DVD Setup screen Touch Menu" screen (page 58). in the "Setup 2 Setup each item 1 2 3 4 5 1 Moves to the "DVD Setup 2" screen when you are using a Dolby Digital software. The operation is available during the play stop mode. Next
  • Kenwood KVT 512 | Instruction Manual - Page 60
    Language setup.) 4 Sets the language and returns to the "DVD Setup 1" screen. (It appears after you have entered a language code.) 5 Clears the language code. 3 Enter a language code See (page 93) and select the desired language. 4 Set the language you use 60 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 61
    to the "DVD Setup 2" screen. 3 Indicates the present parental lock level. 4 Determines the code number and displays the Parental Level setup screen. 5 Clears the code number. ⁄ • The number you enter first is set as your code number. • You can clear the code number by pressing the Reset button
  • Kenwood KVT 512 | Instruction Manual - Page 62
    the screen automatically. "Manual": Allows you to scroll the screen manually. 4 Selects a remote control signal. ( "ON") When turned "OFF", the remote control of TV reception is rejected. 5 Sets a music CD playback. ( "1") "1": Automatically recognizes and plays back an Audio file disc, a DVD or
  • Kenwood KVT 512 | Instruction Manual - Page 63
    ). 2 Select a color 1 Adjusted color is registered to the selected Preset button. 4 Complete the color coordination 2 3 1 Sets to the touched color. 2 Sets and registers favorite color. 3 Returns to the "System Setup 2" screen. To register your original color 1 Start the RGB coordinate English 63
  • Kenwood KVT 512 | Instruction Manual - Page 64
    case, displaying the navigation screen in front monitor allows the rear source to return to the DVD (or USB). Use the easy control buttons to operate the front source. 8 Sets output of operation screen such as control screen to AV-OUT. Operation screen is not output when set to "Black". ( "Through
  • Kenwood KVT 512 | Instruction Manual - Page 65
    q Returns to the "AV Interface 2" screen. w Selects speakers used for voice guidance of the navigation system. ( "Front L") "Front L": Uses the front left side speaker for voice guidance. "Front R": Uses the front right side speaker for voice guidance. "Front LR": Uses both front speakers for voice
  • Kenwood KVT 512 | Instruction Manual - Page 66
    to the "User Interface 3" screen. 7 Sets an on-screen display of the iPod Playback screen. ( "Auto") "Auto": Information is displayed for 5 seconds when updated. "Manual": Information is displayed when you touch on the screen. 8 Sets an on-screen display of the navigation screen. ( "Off") "Auto
  • Kenwood KVT 512 | Instruction Manual - Page 67
    to the "User Interface 3" screen. t Sets whether to display the name of the , , , and buttons on the right side of the menu screen. y Registers the source displayed in the favorite source screen. See (page 67). Direct Source Button Setup Registers the source displayed
  • Kenwood KVT 512 | Instruction Manual - Page 68
    screen. 5 Load the image 7 6 6 1 1 Returns to the Pictrue Select screen. 6 Rotates the image. 7 Returns to the Picture Select screen. ⁄ • See (page 8) for readable image specifications. • This operation is not possible when USB/DVD is selected as the source. 68 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 69
    panel operations. 1 Display the Touch panel Adjustment screen Touch Menu" screen (page 58). in the "Setup 2 Start Touch panel setup 2 Select a image for background 2 1 1 Returns to the initial background. 2 Returns to the original screen. 3 Set the image as the background 3 Adjust the Touch
  • Kenwood KVT 512 | Instruction Manual - Page 70
    with the time data sent from the RDS station. (KVT-512/KVT-532DVD with KNA-DV4100, KNA-DV3100 or KNA-DV2100) When the synchronized mode is set, the clock cannot be adjusted manually. 3 Adjust the clock time 70 KVT-512/KVT-532DVD Monitor Setup You can adjust the position, picture quality and the
  • Kenwood KVT 512 | Instruction Manual - Page 71
    ignition key. q Monitor Action Setup When set to "Quick", the monitor is opened quickly. 12 13 14 15 16 mode. "Full", "Just", "Zoom", "Normal" ⁄ • When you select the Menu or Navigation, the display is shown in the full-size display mode automatically. The screen mode of these displays cannot
  • Kenwood KVT 512 | Instruction Manual - Page 72
    cannot be released. Note the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Touch Menu" screen (page 58). in the "Setup 4 Register your security code 5 Reenter the security code Reenter the same security code as that you have entered in
  • Kenwood KVT 512 | Instruction Manual - Page 73
    If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code Deactivating Security Code To deactivate the Security Code function. 1 Display Security Code Setup screen Touch Menu" screen (page 58). in the "Setup 2 Start to cancel
  • Kenwood KVT 512 | Instruction Manual - Page 74
    the iPod is connected. 1 Sets the Parental lock code. See (Page 75). 2 Switch the Parental lock function on and off. See (Page 76). 3 Sets the channel to set parental lock. See (Page 76). 74 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 75
    and displays the Parental Code 1st screen. 4 Clears the code number. 5 Returns to the "SIRIUS Setup" screen. ⁄ • If you are to register the parental code for the first time, this screen will not appear. Go to Step 3. 3 Enter the new code number Sirius Parental code is now set, and the display
  • Kenwood KVT 512 | Instruction Manual - Page 76
    case, you are requested to input the code once more. 3 Select a category 1 2 2 3 4 1 Displays all the channels in the selected category. The category name scrolls by pressing . 2 Scrolls the category list. 3 Displays all the channels. 4 Returns to the "SIRIUS Setup" screen. 76 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 77
    "SIRIUS Setup" screen. Bluetooth Setup Registers and selects Bluetooth unit. 1 Display the Bluetooth Setup screen Touch Menu" screen (page 58). in the "Setup 2 Setup each item 1 2 1 Sets cell-phone for Hands Free and Audio player for Bluetooth Audio. 2 Sets the PIN code of the Bluetooth unit
  • Kenwood KVT 512 | Instruction Manual - Page 78
    . p Scrolls. q Returns to the previous screen. 78 KVT-512/KVT-532DVD 4 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register. 12 13 14 15 w Enters a code number. e Cancels registration of PIN code. r Enters PIN code. t Clears the code number. ⁄ • You can also register from
  • Kenwood KVT 512 | Instruction Manual - Page 79
    Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. 1 Display the Receiver PIN Code screen Registering Special Bluetooth Unit Registers Special Bluetooth unit that results in error by normal
  • Kenwood KVT 512 | Instruction Manual - Page 80
    the service to use 3 Delete the Bluetooth unit 4 5 6 7 4 Connects/disconnects cell-phone to use for Hands Free. 5 Connects/disconnects Audio player to use for Bluetooth Audio. 6 Deletes registration (pairing). 7 Returns to the previous screen. 4 Confirm deleting of Bluetooth unit 80 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 81
    Software Information Checks the software version of this unit. 1 Display the Software Information screen Touch Menu" screen (page 58). in the "Setup --------- 1 1 Displays the software version. English 81
  • Kenwood KVT 512 | Instruction Manual - Page 82
    . Touch . To cancel clearing, touch . 4 Quit memorization/recalling of settings 6 3 4 5 3 Recalls the memorized settings. 4 Memorizes the current Audio Set Up and AV Interface settings. 5 Clears the currently memorized settings. 6 Returns to "Setup Memory" screen. 82 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 83
    English 83
  • Kenwood KVT 512 | Instruction Manual - Page 84
    . 1 Display Audio Control screen Touch in the "Audio Control Menu" screen (page 84). 2 Set the each item 4 1 2 5 6 3 3 4 1 Moves to the "Audio Control 2" screen. 2 Adjust the front/ , WMA or AAC) is displayed. 1 Switches to the selected Audio Control screen. 84 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 85
    1" screen. 8 Adjusts the subwoofer volume.* 9 Adjusts the volume of the present source based on the difference level of original volume. ⁄ • *Settable Only when zone function is set to Off. See (page 86). • If you have increased the volume first, then reduced the volume using the
  • Kenwood KVT 512 | Instruction Manual - Page 86
    Setup You can set a Tone curve. 1 Display the Tone screen Zone Control You can set the front and rear audio source. 1 Display Zone Control Touch in the "Audio Control Menu" screen (page 84). See (page 85). 2 Set appears when the Zone function is On.) 86 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 87
    selected as the front source, the rear source can be selected from "Front" (same source as front), "iPod" or "VIDEO", etc. When the rear source is set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See (page 64). English 87
  • Kenwood KVT 512 | Instruction Manual - Page 88
    Not used O RETURN CANCEL NAVI mode This is switched when controlling Navigation unit. ⁄ • The position of the remote control mode switch is indicated in the title of each mode, e.g., "(AUD mode)". • When controlling a player that is not integrated in the unit, select "AUD" mode. 88 KVT-512/KVT
  • Kenwood KVT 512 | Instruction Manual - Page 89
    Y 2ABC  5JKL 3 DEF 6MNO 7PQRS CLEAR 1+ 8TUV 0 9WXYZ DIRECT # BS 2 ZONE  R.VOL  AT T V.SEL Switches to the navigation screen. O SRC  MENU ZOOM OUT IN O ENTER O DISP V.SEL  POSITION AUD • DVD • TV• OPEN Opens or closes the monitor each time you press the key. O MODE/TOP MENU FNC
  • Kenwood KVT 512 | Instruction Manual - Page 90
    Remote Controller DVD/VCD/CD/Audio files (DVD mode) Folder search Selects the folder to be played.  O FM+ D O O O AM− directly. DVD Title number Chapter number Play time Item number* Cancel * You may not be able to use this function with some discs or scenes. 90 KVT-512/KVT-532DVD O
  • Kenwood KVT 512 | Instruction Manual - Page 91
    the voice language each time you press this key. O ENTER O O DVD • TV• • NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM ANGLE ZOOM 3 DEF O VOL O 2 ZONE Direct tuning After pressing this key, use the keypad to specify the broadcast station you wish to receive. 7PQRS CLEAR 1+ 8TUV
  • Kenwood KVT 512 | Instruction Manual - Page 92
    OPEN SUBTITLE VIEW MAP DIR ANGLE O MAP DIR Switches between the heading up navigation and north up navigation map displays. O NAVI MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR O  O O FM+ D ANGLE ZOOM O VOL 92 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 93
    DVD Language Codes Code Language Code aa Afar is ab Abkhazian it af Afrikaans ja am Portuguese Quechua Rhaeto-Romance Kirundi Romanian Russian Kinyarwanda Sanskrit Sindhi Sangho Serbo-Croatian Code Language si Singhalese sk Slovak sl Slovenian sm Samoan sn Shona so Somali
  • Kenwood KVT 512 | Instruction Manual - Page 94
    again or use another media. Navigation ? The touch panel control of the navigation system does not work. ✔ Navigation software is not the latest version. ☞ Update the navigation software. For how to update the software, refer to the instruction manual of the navigation unit. 94 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 95
    English 95
  • Kenwood KVT 512 | Instruction Manual - Page 96
    the iPod. ➡ See (page 7). Update your iPod: The iPod's software is an older version which the unit can not support. ➡ Confirm that the software for the iPod is the latest version. See (page 7). 96 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 97
    receive any signal. ➡ Move the vehicle to the area where the unit can receive signal. Updating Firmware: Updating the firmware of Sirius tuner. ➡ Operation is invalid until the update is completed. Updating Channels **% Completed: Updating the Sirius Channel Map. ➡ Operation is invalid until the
  • Kenwood KVT 512 | Instruction Manual - Page 98
    Harmonic Distortion : 0.010 % (1 kHz) S/N Ratio (dB) : 98 dB (DVD-Video 96 kHz) Dynamic Range : 98 dB (DVD-Video 96 kHz) Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit (10 kHz) : 530 kHz - 1700 kHz Usable Sensitivity : 28 dBμ 98 KVT-512/KVT-532DVD
  • Kenwood KVT 512 | Instruction Manual - Page 99
    Video section Color System of External Video Input : NTSC External Video Input Level (RCA jacks) : 1 Vp-p/ 75 Ω External Audio Max Input Level (RCA jacks) : 2 V/ 25 kΩ Video Output Level (RCA jacks) : 1 Vp-p/ 75 Ω Audio Output Level (RCA jacks) : 1.2 V/ 10 kΩ Analog RGB input : 0.7 Vp-p/ 75 Ω Audio
  • Kenwood KVT 512 | Instruction Manual - Page 100
    to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
MONITOR WITH DVD RECEIVER
KVT-512
KVT-532DVD
INSTRUCTION MANUAL
©
B64-4021-00/00 (KW/RW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new DVD Receiver
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KVT-512/KVT-532DVD
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com