Kenwood KVT-54DVDR User Manual 1
Kenwood KVT-54DVDR Manual
 |
View all Kenwood KVT-54DVDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KVT-54DVDR manual content summary:
- Kenwood KVT-54DVDR | User Manual 1 - Page 1
MONITOR WITH DVD RECEIVER KVT-524DVD KVT-554DVD KVT-54DVDR INSTALLATION MANUAL © B54-4700-00/00 (EW/QW/Q2W) - Kenwood KVT-54DVDR | User Manual 1 - Page 2
Installation Procedure/Accessories 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the wire of the wiring harness. 4. Take Connector B on the wiring harness - Kenwood KVT-54DVDR | User Manual 1 - Page 3
Connecting Wires to Terminals Connector Function Guide Pin Numbers for ISO Connectors External Power Connector A-4 A-5 A-6 A-7 A-8 Cable Colour Yellow Blue/White Orange/White Red Black Speaker Connector B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 Purple Purple/Black Gray Gray/Black - Kenwood KVT-54DVDR | User Manual 1 - Page 4
to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle - Kenwood KVT-54DVDR | User Manual 1 - Page 5
Cooling fan Do not connect. REVERSE REMO.CONT MUTE ANT CONT P. CONT Wiring harness (Accessory 1) Antenna Cord FM/AM antenna input (JASO) Wiring harness (Accessory 2) AV IN REAR VIEW CAMERA AV OUT REAR/SUB WOOFER FRONT Audio/Visual input / Rear View Camera Input • Visual input (Yellow) • Audio - Kenwood KVT-54DVDR | User Manual 1 - Page 6
Optional Accessory Connection iPod AUDIO IN iPod (commercially available) KCA-iP301V (Optional Accessory) Audio Input Resistance-free stereo type mini plug (3.5Ф) Audio Output (Black) Visual Output (Yellow) USB terminal Visual Input (Yellow) Resistance-free mini plug (3.5Ф) USB terminal To KCA- - Kenwood KVT-54DVDR | User Manual 1 - Page 7
Installation/Removing the Unit Installation Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). English | 7 - Kenwood KVT-54DVDR | User Manual 1 - Page 8
Installation/Removing the Unit Removing the Hard Rubber Frame (escutcheon) 1. Engage the catch pins on the removal tool 3 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Escutcheon (Accessory 4) Removal Tool (Accessory 3) Removing the Unit
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
©
B54-4700-00/00 (EW/QW/Q2W)
MONITOR WITH DVD RECEIVER
KVT-524DVD
KVT-554DVD
KVT-54DVDR
INSTALLATION MANUAL