Kenwood KVT-719DVD Installation Manual - Page 4
Connection - kvt
View all Kenwood KVT-719DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connection Monitor/Player unit Do not connect. USB device (commercially available) USB connector Ignition key switch Car fuse box ACC Ignition wire (Red) Battery wire (Yellow) Car fuse box (Main fuse) Ground wire (Black) - (To car chassis) Wiring harness (Accessory 2) FUSE ( 5A ) Accessory @ The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @). A Antenna Cord Accessory 4 -+ Battery Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. Parking sensor wire (Light Green) Battery wire (Yellow) FUSE ( 10A ) A Ground wire (Black) - (To car chassis) PRK SW For the sake of safety, be sure to connect the parking sensor. To vehicle's reverse lamp harness Reverse sensor wire (Purple/White) To car light control switch Dimmer control wire (Orange/White) To steering remote Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power control terminal. To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function. Steering remote control input (Light Blue/Yellow) Mute wire (Brown) Motor antenna control wire (Blue) Power control wire (Blue/White) External amplifier control wire (Pink/Black) If no connections are made, do not let the cable come out from the tab. 4 | KVT-719DVD/KVT-739DVD