Kenwood MP635 Instruction Manual

Kenwood MP635 - KDC Radio / CD Manual

Get Kenwood MP635 - KDC Radio / CD PDF manuals and user guides
UPC - 019048171214
View all Kenwood MP635 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood MP635 manual content summary:

  • Kenwood MP635 | Instruction Manual - Page 1
    CD-RECEIVER KDC-X791 KDC-MP735U KDC-MP635 INSTRUCTION MANUAL Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back
  • Kenwood MP635 | Instruction Manual - Page 2
    -in Auxiliary input Setting CD Read Setting Audio Preset Memory Audio Preset Recall Firmware version display Demonstration mode setting Basic Operations of remote control 41 Accessories/ Installation Procedure 43 Connecting Wires to Terminals 44 Installation 45 Troubleshooting Guide 47
  • Kenwood MP635 | Instruction Manual - Page 3
    system of the car is operating. Do Not Load 3-in. CDs in the CD slot If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD players/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998
  • Kenwood MP635 | Instruction Manual - Page 4
    to (page 24). • Press the reset button if the disc auto changer fails to operate correctly. Normal operation should be restored. About KENWOOD "Music Editor" of PC application attached to KDC-X791/MP735U • "Music Editor" is recorded in the CD-ROM attached to this unit
  • Kenwood MP635 | Instruction Manual - Page 5
    WAV (.wav) (KDC-X791/MP735U only) • Playable disc media CD-R/RW/ROM • Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name. • Playable USB device (KDC-X791/MP735U only) USB mass storage class, iPod with KCA-iP200 • Playable USB device file system (KDC-X791/ MP735U only
  • Kenwood MP635 | Instruction Manual - Page 6
    can only play the CDs with . This unit may not correctly play discs which do not have the mark. • You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CDRW recorder instruction manual.) 6 | English FCC
  • Kenwood MP635 | Instruction Manual - Page 7
    "AUX" "AUX EXT" "STANDBY" ⁄ • * Function of KDC-X791/MP735U. • When connection of the iPod is recognized, the source display changes from "USB" to "iPod". • Switch between SRC Select mode 1 and 2 in (page 34). • USB (iPod) source is recognized as CD source on the connected unit
  • Kenwood MP635 | Instruction Manual - Page 8
    the detail of Audio Control>(Page8). (Function of KDCX791) * Source tone memory: Puts the set up value 35 Subwoofer level "SUB-W LEVEL" -15 - +15 System Q "USER"/"ROCK"/ User/Rock/ "POPS"/"EASY Exit Audio Control mode (Volume control mode) 8 | English Function of KDC-X791 Adjusting the detail
  • Kenwood MP635 | Instruction Manual - Page 9
    has no effect on sub source. • You can use the Dual Zone System with the Auxiliary input sources listed below. - Internal auxiliary input. (KDC-X791/MP735U only) - CA-C1AX/ CA-C2AX (optional accessory) connected to this unit directly. (KDC-MP635 only) 5 Exit Audio Setup mode Press the [VOL] knob
  • Kenwood MP635 | Instruction Manual - Page 10
    OFF. When it is ON, "SUB WOOFER ON" is displayed. TEL Wires to Terminals> (page 44). Function Control mode To set up various functions of this unit, select treestructured function items. 1 Enter Function Control mode to play the CD and etc. audio file. Refer to
  • Kenwood MP635 | Instruction Manual - Page 11
    display 3 Text display part 4 Upper text display part 5 Middle text display part 6 Lower text display part 7 Text display part 8 Graphic display part 9 G-Analyzer display part 0 Text icon display part ! Source icon display part 3 Exit Display Type Selection mode Press the Control knob. English
  • Kenwood MP635 | Instruction Manual - Page 12
    in WAV file. (KDC-X791/MP735U) • When playing music from iPod or music edited by "Music Editor", the folder name display may show something different such as playlist or artist name depending on the music selection procedure. (KDC-X791/MP735U) • In the Display Type B part, alternate information is
  • Kenwood MP635 | Instruction Manual - Page 13
    part: Information of condition column "6" is displayed. 3 Exit Text Display Selection mode Press the Control knob. ⁄ • When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (KDC-X791 in WAV file. (KDC-X791/MP735U) • When playing music from iPod or music edited by
  • Kenwood MP635 | Instruction Manual - Page 14
    "Clock" "Date" "Blank" In CD & External disc source Information Disc title "Date" "Blank" In Auxiliary input source Information Auxiliary input name Clock Date Blank Display " part. 3 Select the Font Color Turn the Control knob or push it towards left or right. 4 Exit Font Color Selection mode
  • Kenwood MP635 | Instruction Manual - Page 15
    point among the past 10 data.) • The value of G-Meter display and G-Counter display can be reset by (page 17). 3 Exit G-Analyzer display selection mode Press the Control knob. G-Meter display (Graphic) G-Meter display (Text) G-Counter display ⁄ • G-Graphic display Displays the
  • Kenwood MP635 | Instruction Manual - Page 16
    knob for at least 1 second. ⁄ • You can reset of count when the count is stopped. 5 Exit G-Analyzer Stop Watch mode Press the [FNC] button. ⁄ • When Power off measurement. To prevent danger, push the control knob before starting the car. 4 To display the maximum power in the section Push the Control
  • Kenwood MP635 | Instruction Manual - Page 17
    by this unit may not starting the car lowers the RESET". For the operation method, refer to (page 10). "G-RESET" is displayed. 2 Select the Reset item Turn the Control knob. Display "Meter Reset" "Power Reset" "Counter Reset" Setting Reset the value of G-Meter. Reset
  • Kenwood MP635 | Instruction Manual - Page 18
    select "DISP" > "GMA" > "HP SET" > "WEIGHT". For the operation method, refer to (page 10). "WEIGHT INPUT" is displayed. 2 Select the weight numbers Turn the Control knob. ⁄ • The weight input range is between 1000-9999 lbs. 3 Select the digits to enter Push the Control knob
  • Kenwood MP635 | Instruction Manual - Page 19
    Enter characters by using a remote control with numbers buttons. mode closes. • Memory numbers - FM/AM: 30 stations - Internal CD player: 10 discs - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • Change the title of station/CD
  • Kenwood MP635 | Instruction Manual - Page 20
    or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the
  • Kenwood MP635 | Instruction Manual - Page 21
    reception of stereo stations the "ST" indicator is ON. Tuning Mode Choose the tuning mode. Press the mode alternates between the modes shown in the table below. Tuning mode Auto seek Display Operation "Seek Mode: Automatic search for a station. Auto1" Preset station seek Manual "Seek Mode
  • Kenwood MP635 | Instruction Manual - Page 22
    Tuning mode Press the [DIRECT] button on the remote control. "- - - -" is displayed. 3 Enter the frequency Press the number buttons on the remote control. ] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Recalling the
  • Kenwood MP635 | Instruction Manual - Page 23
    CD/USB device/Audio file/External disc control features  E Release button FNC  SCAN RDM/ REP S.MODE A.RDM IN indicator M.RDM SRC Control knob Folder number File number Function icon Play time Playing CD & Audio file When there is no disc inserted 1 Drop open the faceplate Press the
  • Kenwood MP635 | Instruction Manual - Page 24
    CD/USB device/Audio file/External disc control features 3 Press the faceplate on the left side, and return it to its former position. ⁄ • You can eject the disc for 10 minutes after switching off the engine. Function of KDC-X791/KDC-MP735U Playing USB (iPod) device When the USB device is not
  • Kenwood MP635 | Instruction Manual - Page 25
    player connected to this unit. Press the [SRC] button. Refer to (page 7). Select the display for the disc player you want. Display examples: Display "CD Changer" "MD Changer" Disc player CD played. (KDC-MP635) iPod and the music edited by "Music Editor". Function of remote
  • Kenwood MP635 | Instruction Manual - Page 26
    the current disc or USB device at random. " CD/MD repeatedly. ⁄ • * The functions listed in the table above can be operated with buttons on the unit. • *1 Function of KDC-X791 mode Turn the Control knob. 2 Search for music Select the category item using the Control knob. Operation system for iPod
  • Kenwood MP635 | Instruction Manual - Page 27
    Text/Title Scroll Scrolling the displayed CD text, Audio file text, or MD title. Push the Control knob toward up for at least 2 seconds. ⁄ • When the (page 35) is set to OFF, the display may black out while scrolling. English | 27
  • Kenwood MP635 | Instruction Manual - Page 28
    (optional accessory) connected to this unit. Selecting Satellite Radio Mode Press the [SRC] button. Select the "SAT" display. Refer to (page 7). ⁄ • You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if "CALL TO
  • Kenwood MP635 | Instruction Manual - Page 29
    Press the [DIRECT] button on the remote control. ⁄ • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, "Acquiring Signal" appears
  • Kenwood MP635 | Instruction Manual - Page 30
    band Push the Control knob toward [FM]. 2 Enter Preset Tuning Select mode Turn the Control knob. 3 Select a desired station in the memory Turn display blinks. 2 Release the button when the music you want to hear is received Press the [AUTO] button for at least 2 seconds. Text Scroll for Satellite
  • Kenwood MP635 | Instruction Manual - Page 31
    icon Frequency display About HD Radio • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. • With the HD Radio tuner, you can use the similar functions to
  • Kenwood MP635 | Instruction Manual - Page 32
    can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [FNC] button. ⁄ • When other items those applicable to the original setting.) Also, the explanation for items that are not applicable ( etc.) are entered step by step. • Three menu items
  • Kenwood MP635 | Instruction Manual - Page 33
    and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "Clear" is displayed. The Security Code function deactivates. 7 Exit Security Code mode Press the [FNC] button. ⁄ • If a wrong security code is entered, "Error" is displayed. Enter a correct security code. English | 33
  • Kenwood MP635 | Instruction Manual - Page 34
    for your choice. Allows you to select sources one after another. Function of KDC-X791/KDC-MP735U In USB mode with iPod connected iPod Mode Setting Setting up the iPod operation method in File Select. Display "iPod Mode : ON" "iPod Mode : OFF" Setting Uses the operation method similar to that of
  • Kenwood MP635 | Instruction Manual - Page 35
    format Turn the Control knob or push it towards up or down. 4 Exit Date mode Press the [FNC] button. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI : ON" "DSI : OFF" Setting LED flashes
  • Kenwood MP635 | Instruction Manual - Page 36
    iPod. Function of KDC-X791 Other than Standby mode B.M.S. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit ⁄ • Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit. • For amplifiers, there are the
  • Kenwood MP635 | Instruction Manual - Page 37
    Function of KDC-X791 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Turn the Control knob. Select the "AMS Control" display. 2 Enter AMP Control mode Press the Control knob for at least 1 second. 3 Select the AMP Control item for
  • Kenwood MP635 | Instruction Manual - Page 38
    -X791/KDC-MP735U In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display Setting "Built in AUX : OFF" When selecting the source there's no Auxiliary Input. "Built in AUX : ON" When selecting the source there's Auxiliary Input. In Standby mode CD Read
  • Kenwood MP635 | Instruction Manual - Page 39
    Preset Memory. You cannot register by the source. • When you press the Reset, all the sources will be the setting value which is registered. • The knob. "Recall Completed" is displayed. 8 Exit Audio Preset mode Press the [FNC] button. ⁄ • The User memory of "SYSTEM Q" in (page 8)
  • Kenwood MP635 | Instruction Manual - Page 40
    Function of KDC-X791/KDC-MP735U In Standby mode Firmware version display Displaying the firmware version with the unit. Turn the Control knob. Select the "F/W Version : " display. In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Turn the
  • Kenwood MP635 | Instruction Manual - Page 41
    poles aligned properly, following the illustration inside the case. : This button is used when Kenwood Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. Basic operations [VOL] buttons Adjusts the volume. [SRC] button Each time
  • Kenwood MP635 | Instruction Manual - Page 42
    , such as the procedures for Audio control and others operations. • The remote control can only select and adjust the Basic Audio item. Selecting and adjusting and cancels the (page 22) mode. In Disc/USB source [4]/ [¢] buttons Going forwards and backwards between music.
  • Kenwood MP635 | Instruction Manual - Page 43
    . 3. Connect the speaker wires of the wiring harness. 4. Connect the wiring harness wires in the following order: ground, battery, ignition. 5. Connect the wiring harness connector to the unit. 6. Install the unit in your car. 7. Reconnect the - battery. 8. Press the reset button. 2WARNING If you
  • Kenwood MP635 | Instruction Manual - Page 44
    AUX input (Stereo) Use the mini-plug which is stereo type and does not have any resistance. cable will not come off. Fuse (10A) (KDC-X791/MP735U only) To Kenwood disc changer/ External optional accessory Wiring harness (Accessory1) White To connect these leads, refer to the relevant instruction
  • Kenwood MP635 | Instruction Manual - Page 45
    locations on each side) with the vehicle mounting bracket and secure the unit with the accessory screws. T N T/N NT T: Toyota cars N: Nissan cars 3 ø5mm 8 mm MAX. 4 ø5mm Accessory3...for Nissan car Accessory4 ...for Toyota car 8mm MAX. ¤ • During installation, do not use any screws except
  • Kenwood MP635 | Instruction Manual - Page 46
    main unit so that it does not fall off. 1 Refer to the section and then remove the hard rubber frame. 2 Drop open the faceplate by pressing the Release button. 3 Tighten the screw (ø2 × 5 mm) (Accessory 5) and bracket (Accessory6 ) in the hole shown on the diagram
  • Kenwood MP635 | Instruction Manual - Page 47
    No Audio control effect on AUX. ▲ The Dual zone function is enabled. ☞ (page 9) ! • Cannot register a security code. • Cannot set up Display Illumination Control. ▲ (page 40) is not turned off. ! Cannot play audio files. ▲ (page 38) is set
  • Kenwood MP635 | Instruction Manual - Page 48
    . No Panel: The faceplate of the slave unit being connected to this unit has been removed. Error 77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center. Mecha Error: Something is wrong
  • Kenwood MP635 | Instruction Manual - Page 49
    the reset button. If the "Protect" code does not disappear, consult your nearest service center. Unsupported File: An Audio file is played with a format that this unit can't support. ➪ ---- Copy Protection: A copy-protected file is played. ➪ ---- DEMO MODE (Blink): The Demonstration mode has
  • Kenwood MP635 | Instruction Manual - Page 50
    μV) CD player section Laser diode : GaAlAs Digital filter (D/A) : 8 Times Over Sampling D/A Converter : 1 Bit Spindle speed : 1000 - 400 rpm (CLV 2times) Wow & Flutter : Below Measurable Limit Frequency response (±1 dB) : 10 Hz - 20 kHz Total harmonic distortion (1 kHz) : 0.008 % (KDC-X791) : 0.010
  • Kenwood MP635 | Instruction Manual - Page 51
  • Kenwood MP635 | Instruction Manual - Page 52
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
CD-RECEIVER
KDC-X791
KDC-MP735U
KDC-MP635
INSTRUCTION MANUAL
©
B64-3625-00/00 (KW)
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided
below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X791/MP735U/MP635
Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.kenwoodusa.com