Kenwood MX-5000 User Manual
Kenwood MX-5000 Manual
 |
View all Kenwood MX-5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood MX-5000 manual content summary:
- Kenwood MX-5000 | User Manual - Page 1
POW User's Guide MX-5000 AMPLIFIER ER B60-5163-08 01 KO (K) CR 0103 - Kenwood MX-5000 | User Manual - Page 2
amplifier as part of your high-fidelity system. We at KENWOOD amplifier can deliver. Features Lucasfilm THX® Ultra Certification THX® Ultra certification means that the MX-5000 USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS reset 7 Troubleshooting 7 - Kenwood MX-5000 | User Manual - Page 3
When connecting the related system components, refer also to the instruction manuals of the related components. Do not plug in the power sparking or burning at the terminals because of the very high power that the amplifier can deliver. CAUTIONS: • Connect all cords firmly. If connections are loose - Kenwood MX-5000 | User Manual - Page 4
Back Left and Surround Back Right speakers in a THX Surround EX® home theater system). The amplifier delivers its rated stereo power output into each speaker. 1 Make sure that the MX-5000's power cord is unplugged from the wall outlet before making any connections. 2 According to the speakers - Kenwood MX-5000 | User Manual - Page 5
7 Mono (bridged, or BTL) configuration In this configuration, the MX-5000's two individual channels operate together to drive a single speaker (such as a subwoofer) in mono. This allows the amplifier to deliver more than double the power of one of its channels to the speaker. Now you can plug the - Kenwood MX-5000 | User Manual - Page 6
send a single preamp signal (such as a mono subwoofer output) to both speakers without using a Yadapter. The amplifier delivers its rated stereo power output to each speaker. 1 Make sure that the MX-5000's power cord is unplugged from the wall outlet before making any connections. 2 According to the - Kenwood MX-5000 | User Manual - Page 7
MX-5000 can be powered on and off by a 12 volt trigger signal from a compatible component (such as the Kenwood Sovereign VR-5900 receiver). 1 Make sure that the MX-5000 , plug the power cord into the AC outlet again. 7 Troubleshooting Symptom Cause Remedy Sound is not output from one or all - Kenwood MX-5000 | User Manual - Page 8
amplifier (15-5/32") Weight (net ) ...12.3 kg (27.2 lb) • KENWOOD follows a policy of continuous advancements in development. For this reason specifications may are expressly approved in the instruction manual. The user could lose the authority to service on this product. 8 EN Model Serial Number
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
User’s Guide
MX-5000
R
E
I
F
I
L
P
M
A
R
E
W
O
P
B60-5163-08 01
KO
(K)
CR
0103