Kenwood NX-3920G User Manual

Kenwood NX-3920G Manual

Get Kenwood NX-3920G PDF manuals and user guides View all Kenwood NX-3920G manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood NX-3920G manual content summary:

  • Kenwood NX-3920G | User Manual - Page 1
    .. . NX-3000 series USER MANUAL B5A-2074-00/04
  • Kenwood NX-3920G | User Manual - Page 2
    This manual describes using mainly the Portable transceiver display as examples if the functions are common to both Portable and Mobile transceivers. The Mobile transceiver display are used as and when needed. Automatic Injury Detection (AID) is a registered trademark of Select Engineering Services
  • Kenwood NX-3920G | User Manual - Page 3
    BASIC OPERATIONS SWITCHING POWER ON/ OFF Portable Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. ● The following screen appears if the Custom Start-up Screen has not been set. Turn the Power switch/ Volume control counterclockwise to switch the transceiver power
  • Kenwood NX-3920G | User Manual - Page 4
    4 Repeat steps 2 and 3 to enter the entire password. ● Press the [ ] or [#] button to delete an incorrectly entered number. Press and hold the [ ] or [#] button to delete all numbers. 5 Press the [ ] or [ ] button to confirm the entry. ● If you enter an incorrect password, an error tone sounds and
  • Kenwood NX-3920G | User Manual - Page 5
    TRANSMITTING 1 Select the desired zone and channel using the buttons programmed as [Zone Up]/ [Zone Down] and [Channel Up]/ [Channel Down]. 2 Press the PTT switch and speak into the microphone. Release the PTT switch to receive. ● The LED indicator lights red while transmitting and green while
  • Kenwood NX-3920G | User Manual - Page 6
    transceivers or Mobile transceivers with microphone with keypad, you can enter a unit ID directly by pressing the keypad. ● Press the [ ] button to enter the manual input mode. To delete the ID entered, press the [ ] button to delete one digit, or press and hold the [ ] button to delete all digits
  • Kenwood NX-3920G | User Manual - Page 7
    transceivers or Mobile transceivers with microphone with keypad, you can enter a unit ID directly by pressing the keypad. ● Press the [ ] button to enter the manual input mode. To delete the ID entered, press the [ ] button to delete one digit, or press and hold the [ ] button to delete all digits
  • Kenwood NX-3920G | User Manual - Page 8
    RECEIVING 1 Select the desired zone and channel using the Selector (Portable transceivers only) and the buttons programmed as [Zone Up]/ [Zone Down] or [Channel Up]/ [Channel Down]. (If the Scan function has been programmed, you can switch it on or off as desired.) 2 When you hear the caller's voice
  • Kenwood NX-3920G | User Manual - Page 9
    PROGRAMMABLE FUNCTIONS Refer to the tables in this section to determine which functions are available for appropriate channels. Function descriptions start on page 21. Please contact your dealer for further details on these functions. MENU MODE Many functions on this transceiver are selected or
  • Kenwood NX-3920G | User Manual - Page 10
    5 Press the [ ] or [ ] button to set up the selected function item. ● Press and hold the [ ] button to return to the category list. Alternatively, press the [ ] or [#] button. 6 Press [J]/[K] to select your desired setting. ● For settings with more than one level, repeat steps 5 and 6. 7 Press the [
  • Kenwood NX-3920G | User Manual - Page 11
    PF Button Menu Analog Conv. NXDN Conv. DMR Conv. Function Menu Display AUX Output ID 1 *2 - p N/A p p p AUX Output ID 2 *2 - p N/A p p p AUX Output ID 3 *2 - p N/A p p p Backlight *1 - p N/A p p p Battery Status *1 Battery Status ppppp Bluetooth Bluetooth ppppp Bluetooth Connect
  • Kenwood NX-3920G | User Manual - Page 12
    Channel Select Horn Alert *2 Individual *6 Individual + Short Message *6 Individual + Status *6 Key Delete Language LCD Brightness *2 Lone Worker Low Transmit Power Maintenance Manual Site Hunt Medium Transmit Power Menu Mic Sense Microphone Type Monitor Monitor Momentary Menu Display Display Type
  • Kenwood NX-3920G | User Manual - Page 13
    PF Button Menu Analog Conv. NXDN Conv. DMR Conv. Function Menu Display Operator Selectable Tone OST p p p N/A N/A OST Down - p N/A p N/A N/A OST List OST List p p p N/A N/A OST Up - p N/A p N/A N/A OVCM OVCM p p N/A N/A p Playback Playback ppppp Playback (Last Recording) - p
  • Kenwood NX-3920G | User Manual - Page 14
    PF Button Menu Analog Conv. NXDN Conv. DMR Conv. Function Menu Display Speaker Attenuation Speaker Type Squelch Level Squelch Off Squelch Off Momentary Stack Status Surveillance System Down System Lock System Search Speaker Type Squelch Level Squelch Off Stack Status Surveillance System Lock
  • Kenwood NX-3920G | User Manual - Page 15
    PF Button Menu LTR Trunking NXDN Trunking DMR Trunking o Trunking Operation Function Menu Display None 2-tone 2-tone p N/A p p p p p N/A p N/A Activity Detection *1 Activity Det ppppp Activity Reset *1 - p N/A p p p ANR Preset Audio Profile Auto Telephone Autodial Autodial Programming
  • Kenwood NX-3920G | User Manual - Page 16
    Function Channel Information Channel Recall Channel Up Clear Clock Clock Adjustment CW Message Dialing Digit 10x Down *3 Digit 10x Up *3 Digit 1x Down *3 Digit 1x Up *3 Direct Channel 1 ~ 5 Direct Channel 1 ~ 5 Select Display Format Display Type *1 Emergency *4 External Mic Sense External Speaker
  • Kenwood NX-3920G | User Manual - Page 17
    p p p p p Lone Worker Lone Worker ppppp Low Transmit Power Low TX Power ppppp Maintenance Maintenance ppppp Manual Site Hunt Manual Hunt p p N/A N/A N/A Medium Transmit Power Med TX Power N/A p p p p Menu - p N/A p p p Mic Sense Mic Sense N/A p p p p Microphone Type Monitor
  • Kenwood NX-3920G | User Manual - Page 18
    PF Button Menu LTR Trunking NXDN Trunking DMR Trunking Function Menu Display RX Audio Equalizer (Low Midrange) RX EQ Low Mid N/A p p p p RX Audio Equalizer (Low) RX EQ Low N/A p p p p RX Auto Gain Control RX AGC N/A p p p p Save Log Data Save Log Data p p p p p Scan Scan ppppp Scan
  • Kenwood NX-3920G | User Manual - Page 19
    PF Button Menu LTR Trunking NXDN Trunking DMR Trunking Function Menu Display Telephone Disconnect Transceiver Password Password p N/A p N/A N/A ppppp Transfer *2*3 Transfer p p N/A N/A N/A TX Audio Equalizer (High) TX EQ High N/A p p p p TX Audio Equalizer (High Midrange) TX EQ High Mid
  • Kenwood NX-3920G | User Manual - Page 20
    CHARACTER ENTRY While in the character entry screen, you can use the following two methods to enter the characters: o Pressing the [J]/[K] buttons Press [J]/[K] to cycle the characters from A ~ Z, a ~ z, 0 ~ 9, and a space (default settings). You can also assign a character to an optional button
  • Kenwood NX-3920G | User Manual - Page 21
    ● Texts in the < > brackets are the displays for the button guides. ● Some functions may not be available depending on the transceiver used. Functions available on Portable transceivers only. *2: Functions available on NX-3200/ NX-3300 only. *3: Functions available on Mobile transceivers only. o
  • Kenwood NX-3920G | User Manual - Page 22
    o AUX *1, *2 Toggles the auxiliary port ON and OFF. When toggled on, the optional feature connected to the auxiliary port will be activated and the indicator will appear on the display. o AUX A *3 Toggles the auxiliary port A ON and OFF. When toggled on, the optional feature connected
  • Kenwood NX-3920G | User Manual - Page 23
    o Bluetooth Device Activates Bluetooth Device mode. o Bluetooth Discoverable Allows the transceiver to respond to the search for Bluetooth-enabled devices. o Bluetooth Headset Connection Type Allows you to select the type of Bluetooth headset to be connected to the transceiver via HSP connection. o
  • Kenwood NX-3920G | User Manual - Page 24
    o Channel Down Press this button to decrease the channel number. {p. 4} o Channel Entry Press this button to enter Channel Entry Mode, to select a channel. o Channel Information Allows you to cycle through the display information as follows: Channel name > Zonechannel number
  • Kenwood NX-3920G | User Manual - Page 25
    o Direct Channel 1 ~ 5 Select Allows you to set the currently selected zone and channel as the Direct Channel 1 ~ 5. o Display Format Allows you to switch the display between the zone-channel number and the channel name. o Display Type *1 Refer to "DISPLAY TYPE (Portable transceivers only)"
  • Kenwood NX-3920G | User Manual - Page 26
    o Group + Status Allows you to specify a Group ID to send status messages. o Group ID/ Channel Entry In NXDN Trunking systems, press this button to enter a Group ID. In other operating systems, this button functions the same as Channel Entry. o High Transmit Power Turns High
  • Kenwood NX-3920G | User Manual - Page 27
    the signal strength, site information and Bit Error Rate (BER) on the LCD when constructing the system or during maintenance. o Manual Site Hunt Enables or disables Manual Site Hunt function. Applicable to DMR Site Roaming only. o Medium Transmit Power Turns Medium Transmit Power on or off
  • Kenwood NX-3920G | User Manual - Page 28
    o OVCM (Open Voice Channel Mode) Allows the conversation of a received call to be heard even when the received ID does not match. o Playback Refer to "Playback" {p. 67} . o Playback (Last Recording) Refer to "Playback" {p. 67} . o Priority-channel Select Allows you to
  • Kenwood NX-3920G | User Manual - Page 29
    data to the base station. However, the following must be noted. ● When using the NX-3720G, NX-3720HG, NX-3820G, NX-3820HG, you must connect a KRA-40 GPS antenna. ● When using the NX-3720, NX-3720H, NX-3820, NX-3820H, you must connect an external GPS unit. ● When the power is turned ON and/or
  • Kenwood NX-3920G | User Manual - Page 30
    o Site Down Press this button to decrease the site number. o Site Lock Allows you to lock the current site. The transceiver will not be able to search for alternate sites, and "Site Lock" appears on the display. o Site Number This displays the site number. o Site Select Allows you
  • Kenwood NX-3920G | User Manual - Page 31
    tasks by using the Short Message function. The task administrator sends the operator a Task Request message of which the operator will check the instructions in the message and return a response message such as task started, task ended or rejected to the task administrator. This allows the task
  • Kenwood NX-3920G | User Manual - Page 32
    o TX Audio Equalizer (High) Allows you to set the audio response for high frequencies. o TX Audio Equalizer (High Midrange) Allows you to set the audio response for high midrange frequencies. o TX Audio Equalizer (Midrange) Allows you to set the audio response for midrange frequencies. o TX Audio
  • Kenwood NX-3920G | User Manual - Page 33
    FUNCTION DETAILS SCAN Scan is useful for monitoring signals on the transceiver channels. While scanning, the transceiver checks for a signal on each channel and only stops on a channel if a signal is present. To begin scanning, press the button programmed as [Scan]. ● The indicator appears on the
  • Kenwood NX-3920G | User Manual - Page 34
    SCAN REVERT The Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following Scan Revert channels: ● Selected: The last channel selected is assigned as the new revert channel. ● Selected + Talkback: If the channel has
  • Kenwood NX-3920G | User Manual - Page 35
    o Priority Channel Editing If the Priority channel (Priority 1/ Priority 2) has been set as Operator Selectable by your dealer, you can reprogram the Priority channels. Note: ● A zone/ channel must be added to the scan list before the channel can be set as a Priority channel. 1 Select the channel
  • Kenwood NX-3920G | User Manual - Page 36
    Keypad Auto PTT are available only on full button model Portable transceivers and Mobile transceivers with microphone with keypad. MAKING A DTMF CALL o Manual Dialing 1 Press and hold the PTT switch. 2 Enter the desired digits using the DTMF or microphone keypad. ● The corresponding DTMF tones sound
  • Kenwood NX-3920G | User Manual - Page 37
    programmed as [Menu] to enter Autodial Mode using the Menu Mode. ● The last called unit appears on the display. 2 Press the [ ] button to enter manual input mode. ● To return to the Autodial list, press the [ ] button again. 3 Enter your desired number. ● You can select a digit by using the [J] and
  • Kenwood NX-3920G | User Manual - Page 38
    . 2 Press the [J] and [K] buttons to select your desired list number. 3 Press the PTT switch to make the call. MAKING A TELEPHONE CALL (LTR TRUNKING) o Manual Dialing 1 Select the desired zone and telephone group ID. 2 Press the PTT switch to start the call. 3 Enter the desired number using the DTMF
  • Kenwood NX-3920G | User Manual - Page 39
    ● Only the Auxiliary (orange) button and the PF 1 (orange) button of the optional speaker/ microphone can be programmed with the Emergency function. (NX-3200/ NX-3300 only) Mobile ● Only the Auxiliary ( ) button can be programmed with the Emergency function. 1 Press and hold the button programmed as
  • Kenwood NX-3920G | User Manual - Page 40
    SCRAMBLER (ANALOG/ LTR)/ ENCRYPTION (NXDN/ DMR) Note: ● The Scrambler function can be used only in Analog Conventional and LTR Trunking Operation. ● The following types of encryption are available depending on the system used. NXDN : Bit scrambling (built-in encryption function), 56-bit DES and 256-
  • Kenwood NX-3920G | User Manual - Page 41
    DELETING THE ENCRYPTION KEY (AES/ DES or Enhanced Encryption only) 1 Press the button programmed as [Key Delete] to enter Key Delete Mode. Alternatively, press the button programmed as [Menu] to enter Key Delete Mode using the Menu Mode. 2 Select the Encryption key to be deleted using the [J] and
  • Kenwood NX-3920G | User Manual - Page 42
    SIGNALING QUIET TALK (QT)/ DIGITAL QUIET TALK (DQT) Your dealer may have programmed QT or DQT signaling on your transceiver channels. A QT tone/ DQT code is a sub-audible tone/ code which allows you to ignore (not hear) calls from other parties who are using the same channel. When a channel is set
  • Kenwood NX-3920G | User Manual - Page 43
    OPTIONAL SIGNALING Your dealer may also program several types of optional signaling for your transceiver channels. o 2-tone Signaling 2-tone Signaling opens the squelch only when your transceiver receives a call containing a matching 2-tone signal. 1 Press the button programmed as [2-tone]. ●
  • Kenwood NX-3920G | User Manual - Page 44
    CLOCK Your transceiver can track the time with its built-in clock. If activated by your dealer, the time will be displayed when the transceiver power is turned ON. Note: ● Removing or leaving the battery pack uncharged for extended periods will cause the clock time to clear. CLOCK ADJUSTMENT To set
  • Kenwood NX-3920G | User Manual - Page 45
    MULTI LANGUAGE Your transceiver is equipped with multiple language support feature. You can change the language of the text display on the LCD screen and the language of the voice announcement. There are three languages
  • Kenwood NX-3920G | User Manual - Page 46
    DISPLAY TYPE (Portable transceivers only) You can change the screen display to a simpler layout without the button guides. 1 Press the button programmed as [Menu] to enter Display Type Mode using the Menu Mode. 2 Press the [J]/[K] buttons to select "Normal Type" or "Simple Type".
  • Kenwood NX-3920G | User Manual - Page 47
    2-way Paging Function, and is a protocol owned by JVC KENWOOD Corporation. FleetSync enables a variety of paging functions on your 3 Press the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on a full button
  • Kenwood NX-3920G | User Manual - Page 48
    + Status]/ [Group + Status] to enter Selcall mode (proceed to step 3). 3 Press the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on a full button model Portable transceiver or on the microphone of a Mobile
  • Kenwood NX-3920G | User Manual - Page 49
    for details. ● Long messages can contain a maximum of 4096 characters. GPS REPORT GPS data can be manually transmitted by pressing the button programmed as [Send the GPS Data], or by accessing the Menu {p. , you must first connect the GPS antenna. (NX-3720G, NX-3720HG, NX-3820G, NX-3820HG only) 49
  • Kenwood NX-3920G | User Manual - Page 50
    + Short Message/ Group/ Group + Status/ Group + Short Message in the Menu Mode. 3 Press the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on a full button model Portable transceiver or on the microphone of
  • Kenwood NX-3920G | User Manual - Page 51
    buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the 5 Press the [J] and [K] buttons to select the status you want to transmit. ● If Manual Dialing is enabled, you can enter the status ID by using the keypad on a full button model
  • Kenwood NX-3920G | User Manual - Page 52
    VOICE OPERATED TRANSMISSION (VOX) VOX can be activated or deactivated by your dealer. VOX operation allows you to transmit hands-free. Note: ◆ To operate VOX on a Portable transceiver, you must use an optional headset. ◆ To operate VOX on a Mobile transceiver, you must use an optional headset
  • Kenwood NX-3920G | User Manual - Page 53
    BACKGROUND OPERATIONS TIME-OUT TIMER (TOT) The Time-out Timer can be activated only on Conventional channels and in NXDN Trunking system. It is used to prevent any caller from using a channel for an extended period of time. If you continuously transmit for a period of time that exceeds the
  • Kenwood NX-3920G | User Manual - Page 54
    . Strong signal Sufficient signal Weak signal Very weak signal Out of service range (Appears on NXDN Trunking channels only) BUSY CHANNEL LOCKOUT of Range" appears on the display. If enabled by your dealer, an In-service Tone will sound when an available control channel is detected after the out of
  • Kenwood NX-3920G | User Manual - Page 55
    the status, the new status is announced. ● When changing the function setting, the new setting is announced. VIBRATOR (For Portable transceivers NX-3200/NX-3300 only) When an optional external vibrator (KCT-48VU External Vibration Unit) is installed, the vibrator function will alert you when an
  • Kenwood NX-3920G | User Manual - Page 56
    Service*, Automatic Injury Detection Service*, Battery Service*, Device Information Service* Refer to the table below for more details on each profile. *: Supported details on the Bluetooth devices operationally tested by KENWOOD: http://manual2.jvckenwood.com/com/help_ref/nx5000_series/
  • Kenwood NX-3920G | User Manual - Page 57
    is a function that sends the heart rate [bpm] to the transceiver from a Bluetooth-enabled device (such as heart rate monitor) that supports Heart Rate Service. The transceiver can send the heart rate via Status or activate the Emergency operation. When a Status request message is received from the
  • Kenwood NX-3920G | User Manual - Page 58
    TURNING Bluetooth ON/ OFF Press the button programmed as [Bluetooth] to turn the Bluetooth function on or off. Alternatively, press the button programmed as [Menu] to enter Bluetooth Mode using the Menu Mode. Press the [J] and [K] buttons to select "On" or "Off". Press the [ ] or [ ] button to
  • Kenwood NX-3920G | User Manual - Page 59
    you can pressed the button programmed as [Bluetooth Connect/ Disconnect]. ● The LED indicator blinks in blue. ● For Bluetooth devices that does not support Simple Secure Pairing, you need to enter a Personal Identification Number (PIN) code. You need to operate the Bluetooth headset to proceed with
  • Kenwood NX-3920G | User Manual - Page 60
    headset are powered on. If the headset cannot be used automatically, connect manually using the My Device setting in the Bluetooth menu of the transceiver. Low Energy (Heart Rate Service, Automatic Injury Detection Service, Device Information Service and Battery Service). o Making hands-free
  • Kenwood NX-3920G | User Manual - Page 61
    USEFUL FUNCTIONS There are some useful functions on your transceiver which allows you to display information of the Bluetooth devices registered to the transceiver and to switch the speaker audio output. o Connecting/ Disconnecting/ Deleting a registered device using My Devices Press the button
  • Kenwood NX-3920G | User Manual - Page 62
    To disconnect a device: 1 Press the [J] and [K] buttons to select the device to disconnect. 2 Press the [ ] or [ ] button to disconnect. 3 Press the [ ] or [ ] button to confirm the disconnection. ● The " " indicator and "Disconnected" appear on the display. To delete a device: Note: ● Make sure the
  • Kenwood NX-3920G | User Manual - Page 63
    The remaining battery power of a registered Bluetooth- enabled device that supports Battery Service. Manufacturer : The manufacturer's name of a registered Bluetooth-enabled device that supports Device Information Service. Model : The model number of a registered Bluetooth-enabled device that
  • Kenwood NX-3920G | User Manual - Page 64
    the Find Device mode. ● The icons listed in the above table indicate the connection status of the Headset Profile, Heart Rate Service and Automatic Injury Detection Service. They are not applicable to the Serial Port Profile connection. o Switching the speaker audio output You can switch the audio
  • Kenwood NX-3920G | User Manual - Page 65
    ) connection. The Bluetooth device has rejected a request for pairing, Headset Profile (HSP) connection or Bluetooth Low Energy (Heart Rate Service, Automatic Injury Detection Service) connection. (Display for 1 second) The Bluetooth device does not support Headset Profile (HSP) connection. 65
  • Kenwood NX-3920G | User Manual - Page 66
    BUILT-IN MEMORY Voice recordings recorded using Auto Recording and the GPS data received are stored in the built-in memory of this transceiver. Auto Recording Auto Recording records and retains your last conversation, allowing you to catch what you may have missed hearing during the conversation. If
  • Kenwood NX-3920G | User Manual - Page 67
    Playback You can play back the voice recordings recorded using Auto Recording. 1 Press the button programmed as [Playback] to enter Playback mode. Alternatively, press the button programmed as [Menu] to enter Playback mode using the Menu Mode. ● The voice recordings are listed on the display. 2
  • Kenwood NX-3920G | User Manual - Page 68
    INDICATOR LIST Indicator (*1) (*2) (*2) (*3) (*4) Description Displays the signal strength. Displays the battery power. The channel is using high transmit power. The channel is using medium transmit power. The channel is using low transmit power. In Digital mode (Digital Channel) In Analog mode (
  • Kenwood NX-3920G | User Manual - Page 69
    All models supported. *2 Mobile: Supported models: NX-3720G, NX-3720HG, NX-3820G, NX-3820HG only. Portable: Supported models: NX-3200, NX-3300 only. (For C type) All models supported. (For K/E type) *3 Mobile: Supported models: NX-3720HG, NX-3820HG only. Portable: Supported models: NX-3200, NX-3300
  • Kenwood NX-3920G | User Manual - Page 70
    © 2019
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
NX-3000 series
USER MANUAL
B5A-2074-00/04