Kenwood NX-5200 User Manual 1

Kenwood NX-5200 Manual

Get Kenwood NX-5200 PDF manuals and user guides View all Kenwood NX-5200 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood NX-5200 manual content summary:

  • Kenwood NX-5200 | User Manual 1 - Page 1
    .. . NX-5000 series USER MANUAL B5A-1906-00/05
  • Kenwood NX-5200 | User Manual 1 - Page 2
    NXDN/ DMR 45 SIGNALING ...47 CLOCK ...49 COLOR SCHEME ...50 BATTERY INFORMATION DISPLAY 51 MULTI LANGUAGE ...53 FleetSync: ALPHANUMERIC 2-WAY PAGING (VOX 59 BACKGROUND OPERATIONS 60 Bluetooth ...63 microSD CARD & BUILT-IN MEMORY 74 INDICATOR LIST ...81 This manual has been prepared based on
  • Kenwood NX-5200 | User Manual 1 - Page 3
    ] to enter Transceiver Password Mode using the Menu Mode. ● If a password has been registered and the [Transceiver Password] function has not been programmed to a key or configured to the menu, the transceiver enters Transceiver Password Mode when the power is turned on. 2 Enter a number using the
  • Kenwood NX-5200 | User Manual 1 - Page 4
    the volume. Rotate clockwise to increase the volume and counterclockwise to decrease the volume. SELECTING A ZONE AND CHANNEL 1 Select the desired zone using the keys programmed as [Zone Up]/ [Zone Down]. Each zone contains a group of channels. 2 Select the desired channel using the keys
  • Kenwood NX-5200 | User Manual 1 - Page 5
    . o Making Group Calls (P25 Conventional) You can select a Talkgroup ID from the list to make a call to those parties on a Conventional channel. 1 Press the key programmed as [Group], [Group + Short Message] or [Group + Status] to enter Talkgroup ID Select Mode. Alternatively, press the key
  • Kenwood NX-5200 | User Manual 1 - Page 6
    to specific persons on a Conventional channel. 1 Press the key programmed as [Individual], [Individual + Short Message] or [Individual + a unit ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. To delete the code entered, press the [ ] key to delete one digit,
  • Kenwood NX-5200 | User Manual 1 - Page 7
    wait for the channel to become free. When the traffic channel becomes free, a proceed tone sounds. 1 Select the configured Talkgroup channel using the keys programmed as [Channel Up]/ [Channel Down]. 2 Press and hold the PTT switch to make the call. ● "Calling" appears on the display while the call
  • Kenwood NX-5200 | User Manual 1 - Page 8
    + Status] to enter Individual Call Mode. Alternatively, press the key programmed as [Menu] to enter Individual Call Mode using the Menu Mode. unit ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. To delete the code entered, press the [ ] key to delete one digit
  • Kenwood NX-5200 | User Manual 1 - Page 9
    ID from the list to make a call to those parties on a Conventional channel. 1 Press the key programmed as [Group], [Group + Short Message] or [Group + Status] to enter Group Call Mode. Alternatively, press the key programmed as [Menu] to enter Group Call Mode using the Menu Mode. ● The group ID list
  • Kenwood NX-5200 | User Manual 1 - Page 10
    + Status] to enter Individual Call Mode. Alternatively, press the key programmed as [Menu] to enter Individual Call Mode using the Menu Mode. unit ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. To delete the code entered, press the [ ] key to delete one
  • Kenwood NX-5200 | User Manual 1 - Page 11
    wait for the channel to become free. When the traffic channel becomes free, a proceed tone sounds. 1 Select the configured Group channel using the keys programmed as [Channel Up]/ [Channel Down]. 2 Press and hold the PTT switch to make the call. ● "Calling" appears on the display while the call is
  • Kenwood NX-5200 | User Manual 1 - Page 12
    ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. To delete the code entered, press the [ ] key to delete caller's voice, readjust the volume as necessary. ● If signaling has been programmed on the selected channel, you will hear a call only if the signal
  • Kenwood NX-5200 | User Manual 1 - Page 13
    the call, press the PTT switch. To deny the call, press the key programmed as [Clear]. After receiving the call, you can respond to the call by as you would during a normal call. After the call is finished, press the key programmed as [Clear] to end the call. o Receiving Group Calls (NXDN) When you
  • Kenwood NX-5200 | User Manual 1 - Page 14
    physical controls. Once you become familiar with the Menu system, you will appreciate the versatility it offers. Some transceiver keys may already be programmed with functions listed in the Menu. Those functions can be accessed directly by pressing the key. All other functions can still be accessed
  • Kenwood NX-5200 | User Manual 1 - Page 15
    . ● Press the [ ] key at any time to exit Menu mode. KEY MODE Your transceiver operations vary according to the functions that your dealer has programmed onto the transceiver keys. Refer to "FUNCTION LIST" {p. 15} for the available programmable functions. FUNCTION LIST PF Key: Functions that can be
  • Kenwood NX-5200 | User Manual 1 - Page 16
    Autodial Programming AUX Backlight Auto Dial Auto Dial Prog AUX - ppp ppp ppp p N/A p p N/A N/A ppp ppp ppp Battery Information Battery Info N/A p p p p p Battery Status Battery Status p p p p p p Bluetooth Bluetooth pppppp Bluetooth Connect/ Disconnect Bluetooth Device Bluetooth
  • Kenwood NX-5200 | User Manual 1 - Page 17
    Mic Sense External Speaker Fixed Volume Format SD Card Front Panel Programming Function GPS GPS/ Bluetooth Reset GPS Power p p p p p p Maintenance pppppp Manual Hunt p p N/A N/A N/A p Med TX Power N/A p p p p p - p N/A p p p p Mic Sense N/A p p p p p Mic Type N/A p p p p p Monitor pppppp
  • Kenwood NX-5200 | User Manual 1 - Page 18
    Scan Del/Add pppppp Scan Normal Scan Normal pppppp Scan Program Scan Program p p p p p p Scrambler/ Encryption Scram/Encryp p p p p p p Scrambler/ Encryption Code Scram/Enc Code pppppp Send the GPS Data Send GPS Data p p p p p p Short Message Short Message p p p p N/A p Site Down
  • Kenwood NX-5200 | User Manual 1 - Page 19
    PF Key Menu Analog Conv. NXDN Conv. P25 Conv. DMR Conv. Function Menu Display Site Up - p N/A N/A N/A N/A N/A Speaker Attenuation - p N/A p p p p Speaker Type Speaker Type N/A p p p p p Squelch Level Squelch Level p p p N/A N/A N/A Squelch Off Squelch Off pppppp Squelch Off Momentary
  • Kenwood NX-5200 | User Manual 1 - Page 20
    pppppp Autodial Programming Auto Dial Prog p p p p p p AUX AUX pppppp Backlight - p N/A p p p p Battery Information Battery Info N/A p p p p p Battery Status Battery Status p p p p p p Bluetooth Bluetooth pppppp Bluetooth Connect/ Disconnect - p N/A p p p p Bluetooth Device BT
  • Kenwood NX-5200 | User Manual 1 - Page 21
    Channel 1 ~ 5 Direct Channel 1 ~ 5 Select Display Format Eject SD Card Emergency *3 External Mic Sense External Speaker Fixed Volume Format SD Card Front Panel Programming Function GPS GPS/ Bluetooth Reset GPS Position Display Group *4 Group + Short Message *4 Group + Status *4 Group ID/ Channel
  • Kenwood NX-5200 | User Manual 1 - Page 22
    Manual Site Hunt Manual Hunt p p N/A N/A N/A N/A Medium Transmit Power Med TX Power N/A p p p p p Menu - p N/A p p p p Mic Sense Mic Sense N/A p p p p p Microphone Type Mic RX Auto Gain Control RX AGC N/A p p p p p Save GPS Data Save GPS Data p p p p p p Save Log Data Save Log Data
  • Kenwood NX-5200 | User Manual 1 - Page 23
    Function Menu Display Scan Normal Scan Normal pppppp Scan Program Scan Program p p p p p N/A Scrambler/ Encryption Scram/Encryp p p p p p p Scrambler/ Encryption Code Scram/Enc Code pppppp Send the GPS Data Send GPS Data p p p p p p Short Message Short Message p p p p N/A p Site Down
  • Kenwood NX-5200 | User Manual 1 - Page 24
    VOX Level p p p p p N/A VOX p p p p p N/A Zeroize pppppp Zone Del/ Add p p p N/A N/A N/A - p N/A p p p p - p N/A p p p p - p N/A p p p p *1 Channel Select, Site Select and System Select can be programmed only on the Selector knob. *2 Available only for 5-tone calls. *3 Emergency can be
  • Kenwood NX-5200 | User Manual 1 - Page 25
    the keypad keys to enter characters as shown in the table below. You can press the [ ] or [ ] key repeatedly to switch the input mode (upper case B lower case B numbers B back to beginning). Keypad 1 2 3 4 5 6 7 8 9 0 Character Cycle (Upper
  • Kenwood NX-5200 | User Manual 1 - Page 26
    your dealer. ● Texts in the < > brackets are the displays for the key guides. o None No function has been programmed. o 2-tone Allows you to quickly call the 2-tone list that have been programmed onto your transceiver. o Activity Detection Enables or disables Activity Detection. If
  • Kenwood NX-5200 | User Manual 1 - Page 27
    , this key will not operate. If the Battery Level Tone has been enabled, a beep tone will sound according to the number of flashes from the LED. o Bluetooth Enables or disables the Bluetooth function. Refer to "Bluetooth" {p. 63} . o Bluetooth Connect/ Disconnect Press this
  • Kenwood NX-5200 | User Manual 1 - Page 28
    o Call 1 ~ 6 Press this key to send a message or initiate a call. o Call Interruption Allows a transceiver other than the transmitting transceiver to terminate voice communications by sending and receiving a Call Interruption request message. If a transceiver receives a Call
  • Kenwood NX-5200 | User Manual 1 - Page 29
    name. o Eject SD Card Allows you to eject the microSD card. o Emergency Refer to "EMERGENCY CALLS" {p. 44} . o External Mic Sense Activates External Mic Sense mode. o External Speaker Switches the speaker from the transceiver's built-in speaker to an optional external speaker. o Fixed
  • Kenwood NX-5200 | User Manual 1 - Page 30
    (Field Programming Unit) software or a computer is not available. o Function Press this key, then press a programmable key to activate its secondary function. o GPS Enables or disables the GPS function. o GPS/ Bluetooth Reset Activates GPS/ Bluetooth Reset mode. o GPS Position Display
  • Kenwood NX-5200 | User Manual 1 - Page 31
    microphone or a Bluetooth device still function normally, and the following functions can still be operated: Backlight, Battery Status, Call Response Turns Low Transmit Power on or off. When using a channel programmed with medium or high power, this allows you to change the output power
  • Kenwood NX-5200 | User Manual 1 - Page 32
    Site Hunt Enables or disables Manual Site Hunt function. Applicable to DMR Site Roaming only. o Medium Transmit Power Turns Medium Transmit Power on or off. When using a channel programmed with low or high power, this allows you to change the output power to medium. o Menu Press
  • Kenwood NX-5200 | User Manual 1 - Page 33
    o Playback (Last Recording) Refer to "Playback" {p. 79} . o Priority-channel Select Allows you to set a channel as a priority channel. o Redial Activates Redial mode and allows you to select a previously entered dialing code from the call history to redial a call. o Radio
  • Kenwood NX-5200 | User Manual 1 - Page 34
    of the receiving sound to a specific level for easy listening. o Save GPS Data Allows you to save the current date, time and location information the Scan List and Priority channels using your transceiver. Refer to "SCAN PROGRAMMING" {p. 39} . o Scrambler/ Encryption Allows you to
  • Kenwood NX-5200 | User Manual 1 - Page 35
    o Site Select Allows you to select the site to lock. o Site Up Press this key to increase the site number. o Speaker Attenuation Press this key to attenuate received voice signals. This reduces the strength of the speaker output to cut back any noise and distortion present in the
  • Kenwood NX-5200 | User Manual 1 - Page 36
    current Trunking site. With the site displayed, press and hold the key programmed as [System Search] to enter Search mode. The transceiver begins searching for a Task Request message of which the operator will check the instructions in the message and return a response message such as task started
  • Kenwood NX-5200 | User Manual 1 - Page 37
    the vibrator is on, the transceiver will vibrate when a call is received. o Voice Memo Allows you to record audio near the transceiver manually. o VOX Allows you to adjust the VOX Gain level. o VOX Function Activates the VOX function. Refer to "VOICE OPERATED TRANSMISSION (VOX)" {p. 59
  • Kenwood NX-5200 | User Manual 1 - Page 38
    is no longer present. When the signal "drops out", the transceiver will remain on the channel momentarily before Scan resumes. This delay time is programmed by your dealer. If a signal is received during the delay time, the transceiver will remain on the same channel. To stop scanning, press the
  • Kenwood NX-5200 | User Manual 1 - Page 39
    scan list, and disappears when a channel is removed from the scan list. 4 Press the [ ] key to exit scan programming. Note: ● A zone/ channel cannot be added to the scan list in the following cases. - When it has already been added to the scan list. - When a channel that is not compatible with the
  • Kenwood NX-5200 | User Manual 1 - Page 40
    1 Select the channel where the scan list to be edited has been set, press the key programmed as [Scan Program] to enter Scan Program Mode. Alternatively, press the key programmed as [Menu] to enter Scan Program Mode using the Menu Mode. 2 Press the [ ] key to edit the Priority channel. 3 Press the
  • Kenwood NX-5200 | User Manual 1 - Page 41
    DTMF (DUAL TONE MULTI FREQUENCY) CALLS Note: ● DTMF calls can be made only in Analog Conventional and NXDN Conventional Operation. MAKING A DTMF CALL o Manual Dialing (Full key model only) 1 Press and hold the PTT switch. 2 Enter the desired digits using the DTMF keypad. ● The corresponding DTMF
  • Kenwood NX-5200 | User Manual 1 - Page 42
    the [ ] or [ ] key to confirm your selection. 6 Press the [ ] key to exit Autodial Programming Mode. o Manual Dialing 1 Press the key programmed as [Autodial] to enter Autodial Mode. Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the Menu Mode. ● The last called unit
  • Kenwood NX-5200 | User Manual 1 - Page 43
    press the key programmed as [Menu] to enter Autodial Mode using the Menu Mode. ● The last called unit appears on the display. 2 Press the [J] and [K] keys to select your desired list number. 3 Press the PTT switch to make the call. MAKING A TELEPHONE CALL (LTR TRUNKING) o Manual Dialing 1 Select the
  • Kenwood NX-5200 | User Manual 1 - Page 44
    (orange) key and the PF 1 (orange) key of the optional speaker/ microphone can be programmed with the Emergency function. 1 Press and hold the key programmed as [Emergency]. ● Depending on the delay time programmed into your transceiver, the length of time you must hold the Emergency key will vary
  • Kenwood NX-5200 | User Manual 1 - Page 45
    Secure Cryptographic Module) is a hardware cryptographic module developed by JVC KENWOOD to provide cryptographic securities for digital two way radios. ● The the key programmed as [Scrambler/ Encryption Code] to enter Scrambler/ Encryption Code Mode. Alternatively, press the key programmed as [Menu
  • Kenwood NX-5200 | User Manual 1 - Page 46
    THE ENCRYPTION KEY (AES (SCM*)/ DES (Built-in-DES or SCM*) and Enhanced Encryption only) 1 Press the key programmed as [Key Delete] to enter Key Delete Mode. Alternatively, press the key programmed as [Menu] to enter Key Delete Mode using the Menu Mode. 2 Select the current Encryption key using the
  • Kenwood NX-5200 | User Manual 1 - Page 47
    can still hear your calls if they set up their transceiver with the same tone or code. o Operator Selectable Tone (OST) If a key has been programmed with [Operator Selectable Tone], you can reprogram the QT tone or DQT code on each of your channels. 1 Select your desired channel. 2 Press and hold
  • Kenwood NX-5200 | User Manual 1 - Page 48
    2-tone Signaling opens the squelch only when your transceiver receives a call containing a matching 2-tone signal. 1 Press the key programmed as [2-tone]. ● Alternatively, you can press the key programmed as [Menu] to enter 2-tone Mode using the Menu Mode. 2 Press the [J] and [K] keys to select your
  • Kenwood NX-5200 | User Manual 1 - Page 49
    when the transceiver power is turned ON. Note: ● Removing or leaving the battery pack uncharged for extended periods will cause the clock time to clear. CLOCK ADJUSTMENT To set the time: 1 Press the key programmed as [Clock Adjustment] to enter Clock Adjustment Mode. Alternatively, press the key
  • Kenwood NX-5200 | User Manual 1 - Page 50
    are four available color schemes as follows. Full Color Full Color White Monochrome Black Monochrome White To select a Color Scheme: 1 Press the key programmed as [Menu] to enter Color Scheme Mode using the Menu Mode. 2 Press the [J] and [K] keys to select your desired color scheme. 3 Press the
  • Kenwood NX-5200 | User Manual 1 - Page 51
    information, such as charging condition and temperature, of the Intelligent Battery installed on your transceiver. 1 Press the key programmed as [Menu] to enter Battery Information Display Mode using the Menu Mode. ● The battery information display appears. 2 Press the [J]/[K] keys to scroll up or
  • Kenwood NX-5200 | User Manual 1 - Page 52
    used, and the current full charge capacity is 2340 mAh, the Battery Health will be 90 %. It is recommended to replace the battery once the Battery Health reaches 50 %. *4 KNB-N4 does not support Date of First Use and Battery Alias, these items are displayed as "- - -" even if the information has
  • Kenwood NX-5200 | User Manual 1 - Page 53
    LANGUAGE Your transceiver is equipped with multiple language support feature. You can change the language of selectable are dependent on the dealer setting. For details, consult your dealer. 1 Press the key programmed as [Menu] to enter Language Mode using the Menu Mode. 2 Press the [J]/[K] keys to
  • Kenwood NX-5200 | User Manual 1 - Page 54
    JVC KENWOOD Corporation. FleetSync enables a variety of paging functions on your transceiver, some of which depend on dealer programming. to select the station you want to call. ● On full key model transceivers, if Manual Dialing is enabled, you can enter the station ID by using the keypad. 4 Press
  • Kenwood NX-5200 | User Manual 1 - Page 55
    the [J] and [K] keys to select the status you want to transmit. ● If Manual Dialing is enabled, you can enter a status ID using the keypad or the [J]/[K] The category list is displayed. However, depending on the stack settings programmed by your dealer, the individual list (Caller ID, Status Message
  • Kenwood NX-5200 | User Manual 1 - Page 56
    , you must connect the transceiver to a PC. Ask your dealer for details. ● Long messages can contain a maximum of 4096 characters. GPS REPORT GPS data can be manually transmitted by pressing the key programmed as [Send the GPS Data], or by accessing the Menu {p. 14} . If set up by your dealer
  • Kenwood NX-5200 | User Manual 1 - Page 57
    Only) 5-tone Signaling is enabled or disabled by your dealer. This function opens the squelch only when the transceiver receives the 5 tones programmed in your transceiver. Transceivers that do not transmit the correct tones will not be heard. SELCALL (SELECTIVE CALLING) A Selcall is a voice call
  • Kenwood NX-5200 | User Manual 1 - Page 58
    the status you want to transmit. ● You can enter a status ID using the keypad or the [J]/[K] key (refer to step 3, above). 6 Press the key programmed as [Call 1] to [Call 6] to initiate the call. o Receiving The indicator will flash and a calling ID and status message will appear when a Status call
  • Kenwood NX-5200 | User Manual 1 - Page 59
    VOX Gain Level Sets the Mic input sensitivity of the VOX operation. 1 Connect a headset to the transceiver. 2 Press the key programmed as [VOX]. ● The to the accessory terminal of the transceiver. 2 Press and hold the key programmed as [VOX]. ● Alternatively, you can press the key programmed as
  • Kenwood NX-5200 | User Manual 1 - Page 60
    . Also, if programmed by your dealer, you may have to wait for a short duration before you can continue to transmit. If you press the PTT switch before the timer has been reset, an alert tone will sound and the transceiver will not enter transmit mode. BATTERY SAVER The Battery Saver function can
  • Kenwood NX-5200 | User Manual 1 - Page 61
    signal Sufficient signal Weak signal Very weak signal Out of service range (Appears on NXDN Trunking and P25 Trunking channels only) COMPANDER The compander can be programmed only for specific analog channels. If it has been programmed by your dealer, transmitted signals are compressed before being
  • Kenwood NX-5200 | User Manual 1 - Page 62
    external vibrator (KCT-48VU External Vibration Unit) is installed, the vibrator function will alert you when an optional signaling call is received. Press the key programmed as [Vibrator] or access the Menu {p. 14} to turn the Vibrator function on and off. 62
  • Kenwood NX-5200 | User Manual 1 - Page 63
    on the Bluetooth devices operationally tested by KENWOOD: http://manual2 Service, Automatic Injury Detection Service, Battery Service and Device Information Service. Profile Headset Profile (HSP) Serial Port Profile (SPP) Heart Rate Service Description Headset Profile provides support for Bluetooth
  • Kenwood NX-5200 | User Manual 1 - Page 64
    details, consult your dealer. The transceiver displays the remaining battery power [%] of the Bluetooth-enabled device on the screen when a Bluetooth-enabled device that supports Heart Rate Service or Automatic Injury Detection Service is connected to the transceiver. The transceiver displays the
  • Kenwood NX-5200 | User Manual 1 - Page 65
    / OFF Press the key programmed as [Bluetooth] to turn the Bluetooth function on or off. Alternatively, press the key programmed as [Menu] to enter Bluetooth Mode using the Menu Mode. Press the [J] and [K] keys to select "On" or "Off". Press the [ ] or [ ] key to confirm your selection. " ● " appears
  • Kenwood NX-5200 | User Manual 1 - Page 66
    In this case, select the headset device. 2 Press the [ ] or [ ] key to connect. 3 Press the [ ] or [ ] key to start pairing. Alternatively, you can pressed the key programmed as [Bluetooth Connect/ Disconnect]. ● The LED indicator blinks in blue. ● For Bluetooth devices that does not support Simple
  • Kenwood NX-5200 | User Manual 1 - Page 67
    manually using the My Device setting in the Bluetooth menu of the transceiver. (Some headset models cannot be used automatically.) ● Up to 10 Bluetooth devices can be registered to your transceiver. ● The pressing of the key programmed as Bluetooth set using the External Mic Sense function. o
  • Kenwood NX-5200 | User Manual 1 - Page 68
    The transceiver transits to each mode when the FPU communication begins. To use the PC Interface Protocol, run the PC commands. 68
  • Kenwood NX-5200 | User Manual 1 - Page 69
    the transceiver and to switch the speaker audio output. o Connecting/ Disconnecting/ Deleting a registered device using My Devices Press the key programmed as [Menu] to enter Bluetooth My Devices Mode using the Menu Mode. To connect a device: 1 Press the [ ] key or the [J] and [K] keys to select the
  • Kenwood NX-5200 | User Manual 1 - Page 70
    To disconnect a device: 1 Press the [ ] key or the [J] and [K] keys to select the device to disconnect. 2 Press the [ ] or [ ] key to disconnect. 3 Press the [ ] or [ ] key to confirm the disconnection. ● The " " indicator and "Disconnected" appear on the display. To delete a device: Note: ● Make
  • Kenwood NX-5200 | User Manual 1 - Page 71
    the devices 1 Press the key programmed as [Menu] to enter Bluetooth My Devices Mode using the Menu Bluetooth-enabled device that supports Automatic Injury Detection Service is damaged. Charge : The remaining battery power of a registered Bluetooth- enabled device that supports Battery Service
  • Kenwood NX-5200 | User Manual 1 - Page 72
    Ver. : The firmware version of a registered Bluetooth-enabled device that supports Device Information Service. Software Ver. : The software version of a registered Bluetooth-enabled device that supports Device Information Service. Device Class Disconnected Connected Audio/Video Phone
  • Kenwood NX-5200 | User Manual 1 - Page 73
    (Display for 1 second) The Bluetooth device has rejected a request for pairing, Headset Profile (HSP) connection or Bluetooth Low Energy (Heart Rate Service, Automatic Injury Detection Service) connection. (Display for 1 second) The Bluetooth device does not support Headset Profile (HSP) connection
  • Kenwood NX-5200 | User Manual 1 - Page 74
    are stored in their respective folders. Up to 250 files can be stored in each folder. PRIVATE KENWOOD GPS 㧦 Folder 㧦 File GPS_M SAVED 1. Rename AR_20140110_174530 20140110_174530_AR_N65519.WAV 001 20140110_180010_AR_A16777215.WAV 002 20140121_194915_AR_---.WAV 003 20140129_100835_AR_---.WAV
  • Kenwood NX-5200 | User Manual 1 - Page 75
    , the oldest file in the folder is deleted when storing the 251st file. *3 Only one folder is available for storing GPS data files saved using GPS Data Storage (Manual). Up to 2000 GPS data can be saved in a file. If the folder has reached its maximum limit of 250 files and the 250th file
  • Kenwood NX-5200 | User Manual 1 - Page 76
    as the current saving date. ● The remaining capacity of the microSD card is less than 128 KB when there is a GPS data file in the GPS folder with the same date as the current saving date. GPS Data Storage (Manual) When all the following conditions are satisfied. ● NMEA of any of the Record Format
  • Kenwood NX-5200 | User Manual 1 - Page 77
    , press the key programmed as [Menu] to enter Voice Memo mode using the Menu Mode. ● Recording starts on the transceiver. ● The transceiver will exit Voice Memo mode and stop the recording automatically after 10 minutes into the recording. 2 To stop the recording manually, press the [ ] or
  • Kenwood NX-5200 | User Manual 1 - Page 78
    details, consult your dealer. o GPS Data Storage (Manual) The GPS data can be manually stored in the microSD card using one of the key operations below. ● Press the key programmed as [Save GPS Data]. ● Press the key programmed as [GPS Position Display] to enter the GPS Position Display mode, then
  • Kenwood NX-5200 | User Manual 1 - Page 79
    , press the [H]/ [I] key. Press and hold the key to fast-forward or rewind. o To play back the last recording directly Press the key programmed as [Playback (Last Recording)] to play back the latest audio data recorded using the Auto Recording function. o To save a recording 1 Press the [ ] key
  • Kenwood NX-5200 | User Manual 1 - Page 80
    o To delete a folder 1 Press the [ ] key while the folder list is displayed. Then press the [ ● A confirmation message appears on the display. 2 Press the [ ] or [ ] key to delete. ] or [#] key. 80
  • Kenwood NX-5200 | User Manual 1 - Page 81
    ) In Digital mode (Mixed Channel) In Analog mode (Mixed Channel) The Bluetooth function is activated. Blinks in the process of turning on Bluetooth. Connected to a Bluetooth device. The GPS position is determined. Blinks when the GPS is unable to determine the position. Non-priority Scan or Voting
  • Kenwood NX-5200 | User Manual 1 - Page 82
    . The System Lock is activated. The Broadcast Call function is activated. The Surveillance function is activated. Appears when the selected group is programmed as telephone IDs. Blinks during Auto Telephone search. The Tactical Zone is activated. The auxiliary port is activated. The Lone Worker
  • Kenwood NX-5200 | User Manual 1 - Page 83
    © 2019
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
NX-5000 series
USER MANUAL
B5A-1906-00/05