Kenwood NX-5300SA User Manual 1

Kenwood NX-5300SA Manual

Get Kenwood NX-5300SA PDF manuals and user guides View all Kenwood NX-5300SA manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood NX-5300SA manual content summary:

  • Kenwood NX-5300SA | User Manual 1 - Page 1
    UHF DIGITAL TRANSCEIVER USER GUIDE This User Guide covers only the basic operations of your radio. Ask your dealer for information on anycustomized features they may have added to your radio. For using details User Manual, refer to the following URL. http://manual.kenwood.com/en_contents/search
  • Kenwood NX-5300SA | User Manual 1 - Page 2
    THANK YOU We are grateful you have chosen KENWOOD for your Digital Transceiver applications. CONTENTS NOTICES TO THE USER 3 PRECAUTIONS 4 TERMINAL DESCRIPTIONS 11 UNPACKING AND CHECKING EQUIPMENT 12 SUPPLIED ACCESSORIES 12 PREPARATION 13 INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK 13
  • Kenwood NX-5300SA | User Manual 1 - Page 3
    the operation of unlicensed radio transmitters within the territories under government control. • Illegal operation is punishable by fine and/or imprisonment. • Refer service to qualified technicians only. Safety: It is important that the operator is aware of and understands hazards common to the
  • Kenwood NX-5300SA | User Manual 1 - Page 4
    PRECAUTIONS • Do not charge the transceiver and battery pack when they are wet. • Ensure that there are no metallic items located between the transceiver and the battery pack. • Do not use options not specified by KENWOOD. • If the die-cast chassis or other transceiver part is damaged, do not touch
  • Kenwood NX-5300SA | User Manual 1 - Page 5
    • In aircrafts. (Any use of the transceiver must follow the instructions and regulations provided by the airline crew.) • Where restrictions or warnings grain powders, etc.). • While taking on fuel or while parked at gasoline service stations. • Do not remove the black sheet from the reverse side of
  • Kenwood NX-5300SA | User Manual 1 - Page 6
    • Do not disassemble or modify the transceiver for any reason. • Do not place the transceiver on or near airbag equipment while the vehicle is running. When the airbag inflates, the transceiver may be ejected and strike the driver or passengers. • Do not transmit while touching the antenna terminal
  • Kenwood NX-5300SA | User Manual 1 - Page 7
    Information concerning the battery pack: The battery pack includes flammable objects such as organic solvent. Mishandling may cause the battery to rupture producing flames or extreme heat, deteriorate, or cause other forms of damage to the battery. Please observe the following prohibitive matters. •
  • Kenwood NX-5300SA | User Manual 1 - Page 8
    • Do not charge the battery near fires or under direct sunlight! If the battery's protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame. • Use only the
  • Kenwood NX-5300SA | User Manual 1 - Page 9
    eyes out with fresh water as soon as possible, without rubbing your eyes. Go to the hospital immediately. If left untreated, it may cause eye-problems. • Do not charge the battery for longer than the specified time! If the battery pack has not finished charging even after the regulated time
  • Kenwood NX-5300SA | User Manual 1 - Page 10
    NOTIFICATION OF WATER-RESISTANT MODEL Water Resistance and Maintenance Water-Resistant Model transceiver conforms to the following standards. Immersion: The transceiver retains its water resistant capabilities outlined in U.S. Military Standards when submersed in water at a depth of 1 meter (3.28
  • Kenwood NX-5300SA | User Manual 1 - Page 11
    TERMINAL DESCRIPTIONS Universal connector It is possible to use a resin-based cover for the Universal connector. Pin No. Name I/O Description Specification 1 SSW I Ext/Int Speaker Switch Input Hi: INT, Low: EXT 2 SP+ O BTL Output + for External Speaker Standard load 8  3 SP- O BTL
  • Kenwood NX-5300SA | User Manual 1 - Page 12
    AND CHECKING EQUIPMENT Note: • The following unpacking instructions are for use by your KENWOOD dealer, an authorized KENWOOD service facility, or the factory. Carefully unpack the belt clip (M3 x 8 mm 2 Universal connector cap 1 • Dressing screw 1 • Packing (preassembled 1 Users Guide 1 12
  • Kenwood NX-5300SA | User Manual 1 - Page 13
    and the battery pack is not attached to the transceiver, return the release latch to its original position using your finger. Release latch 1 Match the guides of the battery pack with the corresponding grooves on the upper rear of the transceiver, then firmly press the battery pack to lock it in
  • Kenwood NX-5300SA | User Manual 1 - Page 14
    INSTALLING THE (OPTIONAL) ANTENNA Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Optional antenna INSTALLING THE BELT CLIP If necessary, attach the belt clip using the two supplied M3 x 8 mm binding
  • Kenwood NX-5300SA | User Manual 1 - Page 15
    . 2 Secure the cap in place using the dressing screw. Universal connector cap INSTALLING THE (OPTIONAL) SPEAKER/ MICROPHONE OR HEADSET 1 Insert the guide of the speaker/ microphone or headset connector into the groove of the universal connector. 2 Secure the connector in place using the attached
  • Kenwood NX-5300SA | User Manual 1 - Page 16
    clean before opening the microSD memory card slot cap. Compensation Disclaimer Data stored on the microSD memory card may be altered or lost due to problems with this transceiver. We do not accept liability in respect of the data stored on your microSD memory card, failure to save the data properly
  • Kenwood NX-5300SA | User Manual 1 - Page 17
    ORIENTATION KEYS AND CONTROLS Speaker Microphone microSD memory card slot a Power switch/ Volume control Turn clockwise to switch the transceiver ON. To switch the transceiver OFF, turn counterclockwise fully. Rotate to adjust the volume level. b Selector knob Rotate this control to activate its
  • Kenwood NX-5300SA | User Manual 1 - Page 18
    c Transmit/ Receive/ Battery low indicator The indicator lights in different colors to indicate the current status of the transceiver. Lights red while transmitting and green while receiving. Flashes red when the battery power is low while transmitting. Replace or recharge the battery pack when the
  • Kenwood NX-5300SA | User Manual 1 - Page 19
    , keep the supplied cap in place. For details on programming functions to the keys on your transceiver, please contact your dealer or refer to the instruction manual available from the following URL. http://manual.kenwood.com/en_contents/search/keyword 19
  • Kenwood NX-5300SA | User Manual 1 - Page 20
    Basic Frame Function Indicator Area Main Area Key Guide Area Display Area Description Display the various function Display the information of the transceiver such as Channel number and Zone number. Key Guide Area Display the key functions for [ ],[ ] and [ ]. Function Indicator Indicator
  • Kenwood NX-5300SA | User Manual 1 - Page 21
    Indicator Description Connected to Bluetooth device. The Bluetooth function is activated. Blinks in the process of turning on Bluetooth. The GPS position is determined. Blinks when the GPS is unable to determine the position. Non-priority Scan or Voting/Site Roaming is in progress. Blinks when the
  • Kenwood NX-5300SA | User Manual 1 - Page 22
    Indicator Description The Noise Reduction function is activated. Blinks when Noise Reduction is functioning. Blinks when an incoming call matches your Optional Signaling. The Vibrator function is activated. Blinks when the Vibrator is not functioning. A message is stored in the memory. Blinks when
  • Kenwood NX-5300SA | User Manual 1 - Page 23
    BASIC OPERATIONS SWITCHING POWER ON/ OFF Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. Turn the Power switch/ Volume control counter-clockwise to switch the transceiver power OFF. ADJUSTING THE VOLUME rotate the Power switch/ Volume control to adjust the volume.
  • Kenwood NX-5300SA | User Manual 1 - Page 24
    TRANSMITTING 1 Select the desired zone and channel using the Selector knob and the [Zone Up]/ [Zone Down] or [Channel Up]/ [Channel Down] keys. 2 Press the PTT switch and speak into the microphone. Release the PTT switch to receive. • The LED indicator lights red while transmitting and green while
  • Kenwood NX-5300SA | User Manual 1 - Page 25
    INFORMATION ON SOFTWARE LICENSE This transceiver uses a software according to the following license agreements. *zlib LICENSE Copyright (C) 1995-2013 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held
  • Kenwood NX-5300SA | User Manual 1 - Page 26
    Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular
  • Kenwood NX-5300SA | User Manual 1 - Page 27
    . The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated
  • Kenwood NX-5300SA | User Manual 1 - Page 28
    © 2016
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
UHF DIGITAL TRANSCEIVER
USER GUIDE
B5A-1247-00 (M)
NX-5300SA
This User Guide covers only the basic
operations of your radio. Ask your dealer for
information on anycustomized features they
may have added to your radio. For using
details User Manual, refer to the following URL.