Home » Kenwood Manuals » Electronics Accessories » Kenwood TK-2202 » Manual Viewer

Kenwood TK-2202 User Manual

Kenwood TK-2202 Manual

Get Kenwood TK-2202 PDF manuals and user guides

View all Kenwood TK-2202 manuals

Add to My Manuals
Save this manual to your list of manuals

Kenwood TK-2202 manual content summary:

Kenwood TK-2202 | User Manual - Page 1
TK-2202/ TK-3202 VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER INSTRUCTION MANUAL ÉMETTEUR-RÉCEPTEUR FM VHF/ ÉMETTEUR-RÉCEPTEUR FM UHF MODE D'EMPLOI TRANSCEPTOR DE FM VHF/ TRANSCEPTOR DE FM UHF MANUAL DE INSTRUCCIONES RICETRASMETTITORE FM VHF/ RICETRASMETTITORE FM UHF MANUALE DI ISTRUZIONI VHF-FM-
Kenwood TK-2202 | User Manual - Page 2
ENGLISH VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER TK-2202/ TK-3202 INSTRUCTION MANUAL
Kenwood TK-2202 | User Manual - Page 3
and features of this product. MODELS COVERED BY THIS MANUAL TK-2202: 8-channel VHF FM Transceiver TK-3202: 8-channel UHF FM Transceiver NOTICES TO THE USER ◆ Government law prohibits the operation of unlicensed radio transmitters within the territories under government control. ◆ Illegal operation
Kenwood TK-2202 | User Manual - Page 4
metallic items located between the transceiver and the battery pack. • Do not use options not specified by KENWOOD. • If the die-cast chassis or other the transceiver on unstable surfaces. • Ensure that the end of the antenna does not touch your eyes. • When the transceiver is used for transmission
Kenwood TK-2202 | User Manual - Page 5
at gasoline service stations. antenna covering. Transmitting at such a time may result in a high-frequency burn. • If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, remove the battery pack from the transceiver, and contact your KENWOOD
Kenwood TK-2202 | User Manual - Page 6
CONTENTS UNPACKING AND CHECKING EQUIPMENT 1 SUPPLIED ACCESSORIES 1 PREPARATION 2 INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK 2 INSTALLING THE (OPTIONAL) ANTENNA 3 INSTALLING THE BELT CLIP 3 INSTALLING THE COVER OVER THE SPEAKER/ MICROPHONE JACKS .......... 4 INSTALLING THE (OPTIONAL)
Kenwood TK-2202 | User Manual - Page 7
, file a claim with the carrier immediately. SUPPLIED ACCESSORIES Item Speaker/ microphone jack cover Speaker/ microphone locking bracket Belt clip Screw set Instruction manual Part Number Quantity B09-0680-XX 1 J19-5472-XX 1 J29-0713-XX 1 N99-2046-XX 1 B62-1893-XX 1 Speaker/ microphone
Kenwood TK-2202 | User Manual - Page 8
charge it before use. ◆ Do not short the battery terminals or dispose of the battery by fire. ◆ Never attempt to remove the casing from the battery pack. 1 Align the battery pack with the back of the transceiver, then press the battery pack and transceiver firmly together until the release latch on
Kenwood TK-2202 | User Manual - Page 9
at its base and turning it clockwise until secure. Note: The antenna is neither a handle, a key ring retainer, nor a speaker/ microphone attachment point. Using the antenna in these ways may damage the antenna and degrade your transceiver's performance. INSTALLING THE BELT CLIP If necessary, attach
Kenwood TK-2202 | User Manual - Page 10
INSTALLING THE COVER OVER THE SPEAKER/ MICROPHONE JACKS If you are not using a speaker/ microphone, install the cover over the speaker/ microphone jacks using the supplied 3 x 6 mm screw. Note: To keep the transceiver water resistant, you must cover the speaker/ microphone jacks with the supplied
Kenwood TK-2202 | User Manual - Page 11
GETTING ACQUAINTED Antenna LED indicator Lights red while transmitting. Lights green while receiving a signal. Flashes red when the battery voltage is low while transmitting. Speaker Microphone Channel selector Rotate to select channels 1 ~ 8. Power switch/ Volume control Turn clockwise to switch
Kenwood TK-2202 | User Manual - Page 12
PROGRAMMABLE AUXILIARY FUNCTIONS Your dealer can program each of the Side 1 and Side 2 keys with one of the following auxiliary functions. Refer to their descriptions, starting on page 8. • Key Lock • Key Lock (with Backup) • Monitor • Monitor Momentary • None (No function) (default setting for Side
Kenwood TK-2202 | User Manual - Page 13
microphone using your normal speaking voice. • Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips. 5 Release the PTT switch to receive. Note: When the battery pack voltage becomes too low, transmission will stop and an alert tone will sound. See "Low
Kenwood TK-2202 | User Manual - Page 14
ADVANCED OPERATIONS The following functions are programmable by your dealer, as described on page 6. KEY LOCK Press and hold the key programmed as Key Lock for 1 second to lock/ unlock the transceiver keys. The following keys/ functions can still be used when Key Lock is active: Key Lock, Monitor,
Kenwood TK-2202 | User Manual - Page 15
SCAN Scan is useful for monitoring signals on the transceiver channels. When scanning, the transceiver checks for a signal on each channel and only stops if a signal is present. The transceiver will remain on a busy channel until the signal is no longer present. Your dealer programs the delay time
Kenwood TK-2202 | User Manual - Page 16
■ Temporary Delete If a key is programmed with the Temporary Delete or Scan + Temporary Delete function, you can temporarily remove specific channels from the scanning sequence during Scan. When Scan stops at a channel, you can remove that channel from the scanning sequence by pressing and holding
Kenwood TK-2202 | User Manual - Page 17
the key programmed as Scrambler. To deactivate the Scrambler, press the Scrambler key again. TALK AROUND You may occasionally experience an interruption in service (due to a power failure, etc.). During such an occurence, you can continue communication by using the Talk Around feature, if it has
Kenwood TK-2202 | User Manual - Page 18
operation allows you to transmit hands-free. This feature must first be activated by your dealer, and can only be used if you are using a supported headset. When operating VOX, you must set a VOX Gain level. This setting allows the transceiver to recognize sound levels. If the microphone is too
Kenwood TK-2202 | User Manual - Page 19
4 Press the Side 1 key to increase the VOX Gain level and the Side 2 key to decrease the level. • The VOX Gain can be adjusted from levels 1 to 10 and OFF. • The transceiver announces the VOX Gain level as you adjust it. If OFF is selected, a beep sounds. 5 Press the PTT switch to save the setting.
Kenwood TK-2202 | User Manual - Page 20
for an explanation on how BCL functions when using QT or DQT signalling. LOW BATTERY WARNING Low Battery Warning alerts you when the battery needs to be recharged or replaced. While operating the transceiver, if the battery power becomes low, an alert tone will sound every 30 seconds and the LED
Kenwood TK-2202 | User Manual - Page 21
turned). While the channel is not busy and no operation is performed for 5 seconds, Battery Saver turns ON. When a signal is received or an operation is performed, Battery Saver turns OFF. Note: While the Battery Saver is operating, the LED may flash green when receiving a QT/DQT signal which does
Kenwood TK-2202 | User Manual - Page 22