Kenwood TK-5330 User Manual

Kenwood TK-5330 Manual

Get Kenwood TK-5330 PDF manuals and user guides View all Kenwood TK-5330 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood TK-5330 manual content summary:

  • Kenwood TK-5330 | User Manual - Page 1
    TK-5230 TK-5330 TK-5430 USER MANUAL B5A-0970-00 (K)
  • Kenwood TK-5330 | User Manual - Page 2
    47 VOICE OPERATED TRANSMISSION (VOX 50 BACKGROUND OPERATIONS 51 Bluetooth ...54 microSD CARD & BUILT-IN MEMORY 64 INDICATOR LIST ...67 This manual has been prepared based on basic settings. Depending on the setting, the descriptions provided may be different from the actual operations. 2
  • Kenwood TK-5330 | User Manual - Page 3
    BASIC OPERATIONS SWITCHING POWER ON/ OFF Turn the Power switch/ Volume control clockwise to switch the transceiver power ON. ● The following screen appears if the Custom Start-up Screen has not been set. Turn the Power switch/ Volume control counterclockwise to switch the transceiver power OFF.
  • Kenwood TK-5330 | User Manual - Page 4
    2 Enter a character using the [J] and [K] keys. ● On full key model transceivers, you can enter the password directly by pressing the keypad. Refer to "CHARACTER ENTRY" {p. 20} . 3 Press the [ ] or [ ] key to accept the character. 4 Repeat steps 1 and 2 to enter the entire password. ● Press the [ ]
  • Kenwood TK-5330 | User Manual - Page 5
    TRANSMITTING 1 Select the desired zone and channel using the keys programmed as [Zone Up]/ [Zone Down] and [Channel Up]/ [Channel Down]. 2 Press the PTT switch and speak into the microphone. Release the PTT switch to receive. ● The LED indicator lights red while transmitting and green while
  • Kenwood TK-5330 | User Manual - Page 6
    into your transceiver. Alternatively, on full key models, you can enter a unit ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. Refer to "CHARACTER ENTRY" {p. 20} . Press the [ ] key to confirm the code after entering the code using the keypad. To delete the
  • Kenwood TK-5330 | User Manual - Page 7
    3 Press and hold the PTT switch to make the call. ● Speak into the transceiver as you would during a normal call. ● The LCD display will return to the zone and channel screen after call ends. o Making Group Calls (P25 Trunking) You can select a channel with the Talkgroup ID you wanted to call to
  • Kenwood TK-5330 | User Manual - Page 8
    appears on the display. Alternatively, on full key models, you can enter a unit ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. Refer to "CHARACTER ENTRY" {p. 20} . Press the [ ] key to confirm the code after entering the code using the keypad. To delete the
  • Kenwood TK-5330 | User Manual - Page 9
    2 Press the [J] and [K] keys to select a Group ID/ name from the list that has been pre-entered into your transceiver. 3 Press and hold the PTT switch to make the call. ● Speak into the transceiver as you would during a normal call. ● The LCD display will return to the zone and channel screen after
  • Kenwood TK-5330 | User Manual - Page 10
    Alternatively, on full key models, you can enter a unit ID directly by pressing the keypad. ● Press the [ ] key to enter the manual input mode. Refer to "CHARACTER ENTRY" {p. 20} . Press the [ ] key to confirm the code after entering the code using the keypad. To delete the code
  • Kenwood TK-5330 | User Manual - Page 11
    2 Press and hold the PTT switch to make the call. ● Speak into the transceiver as you would during a normal call. ● The display will alternate between the called Group ID/ name and "Calling". ● The LCD display will return to the zone and channel screen after call ends. o Making Individual Calls (
  • Kenwood TK-5330 | User Manual - Page 12
    o Receiving Individual Calls (P25) When you receive an individual call on a Conventional channel, a ringing tone will sound and the display will show the caller's ID. To respond to the call, press and hold the PTT switch and speak into the transceiver as you would during a normal call. When you
  • Kenwood TK-5330 | User Manual - Page 13
    PROGRAMMABLE FUNCTIONS Refer to the tables in this section to determine which functions are available for appropriate channels. Function descriptions start on page 21. Please contact your dealer for further details on these functions. MENU MODE Many functions on this transceiver are selected or
  • Kenwood TK-5330 | User Manual - Page 14
    4 Press [J]/[K] to select a function item. ● On full key models, you can enter a function number directly. Refer to "CHARACTER ENTRY" {p. 20} . 5 Press the [ ] or [ ] key to set up the selected function item. ● Press the [ ] or [#] key to return to the category list. 6 Press [J]/[K] to select your
  • Kenwood TK-5330 | User Manual - Page 15
    PF Key Menu Analog Conv. NXDN Conv. P25 Conv. LTR Trunking NXDN Trunking P25 Trunking Function Menu Display Autodial Auto Dial p p p p N/A p p p Autodial Programming AUX Auto Dial Prog p p p p p p AUX ppp p p p pp pp Backlight - Battery Information Battery Info p N/A p p p p N/A p p p
  • Kenwood TK-5330 | User Manual - Page 16
    PF Key Menu Analog Conv. NXDN Conv. P25 Conv. LTR Trunking NXDN Trunking P25 Trunking Function Menu Display External Mic Sense Ext Mic Sense N/A p p p p p External Speaker External SP ppp p p p Fixed Volume Fixed Volume p p p p p p pp pp pp Format SD Card Function Format Card - ppp p p p
  • Kenwood TK-5330 | User Manual - Page 17
    PF Key Menu Analog Conv. NXDN Conv. P25 Conv. LTR Trunking NXDN Trunking P25 Trunking Function Menu Display Menu Mic Sense Microphone Type Mic Sense Mic Type p N/A p p p p N/A p p p p p N/A p p p p p pp pp pp Monitor Monitor ppp p p p p p Monitor Momentary - p N/A p p p p p p Operator
  • Kenwood TK-5330 | User Manual - Page 18
    PF Key Menu Analog Conv. NXDN Conv. P25 Conv. LTR Trunking NXDN Trunking P25 Trunking Function Menu Display Scrambler/ Scram/Enc Encryption Code Code ppp p p p p p Send the GPS Data Send GPS Data ppp p p p p p Short Message Short Message p p p p N/A p p N/A Site Down Site Lock Site
  • Kenwood TK-5330 | User Manual - Page 19
    Trunking systems, Individual + Short Message and Individual + Status function in the same manner as Individual. Sending of short messages and status messages is not supported. *6 Keyset and Rekey Request can be used when set as P25 OTAR. *7 Zone Select can be programmed only on the Selector knob and
  • Kenwood TK-5330 | User Manual - Page 20
    CHARACTER ENTRY While in the character entry screen, you can use the following two methods to enter the characters: o Pressing the [J]/[K] keys Press [J]/[K] to cycle the characters from A ~ Z, a ~ z, 0 ~ 9, and a space (default settings). You can also assign a character to an optional key and
  • Kenwood TK-5330 | User Manual - Page 21
    that are not included in "FUNCTION DETAILS" {p. 31} , please contact your dealer. ● Texts in the < > brackets are the displays for the key guides. o None No function has been programmed. o 2-tone Allows you to quickly call the 2-tone list that have been programmed onto your transceiver
  • Kenwood TK-5330 | User Manual - Page 22
    o Backlight Press this key to turn the display backlight on or off. If Auto backlight is activated by your dealer, the backlight can be set to activate by key operations or when receiving a call/ message. o Battery Information Allows you to check the detailed information of the Intelligent
  • Kenwood TK-5330 | User Manual - Page 23
    o Call Response Press this key to respond to an Individual Call. When an Individual Call is received, the Alert tone stops. o Channel Down Press this key to decrease the channel number. {p. 4} o Channel Entry Press this key to enter Channel Entry Mode, to select a channel. o
  • Kenwood TK-5330 | User Manual - Page 24
    o Display Format Allows you to switch the display between the zone-channel number and the channel name. o Eject SD Card Allows you to eject the microSD card. o Emergency Refer to "EMERGENCY CALLS" {p. 37} . o External Mic Sense Activates External Mic Sense mode. o External Speaker <
  • Kenwood TK-5330 | User Manual - Page 25
    o High Transmit Power Turns High Transmit Power on or off. When using a channel programmed with low or medium power, this allows you to change the output power to high. o Home Channel Press this key to jump to your home zone and channel (pre-programmed by your dealer). If activated by
  • Kenwood TK-5330 | User Manual - Page 26
    o Low Transmit Power Turns Low Transmit Power on or off. When using a channel programmed with medium or high power, this allows you to change the output power to low. o Maintenance Allows you to display the signal strength and site information on the LCD when constructing the system or
  • Kenwood TK-5330 | User Manual - Page 27
    o Priority-channel Select Allows you to set a channel as a priority channel. o Radio Check Allows you to check whether the transceiver can be communicated or not. o Radio Inhibit Allows you to inhibit the transceiver operation by remote control. o Radio Uninhibit Allows you to uninhibit the
  • Kenwood TK-5330 | User Manual - Page 28
    o Scan Program Allows you to reprogram the Scan List and Priority channels using your transceiver. Refer to "SCAN PROGRAMMING" {p. 32} . o Scrambler/ Encryption Allows you to prevent a third party from listening in on your call. Refer to "SCRAMBLER (ANALOG)/ ENCRYPTION (P25/
  • Kenwood TK-5330 | User Manual - Page 29
    o Squelch Off Allows you to turn the transceiver squelch off, to better hear weak signals on the channel. o Squelch Off Momentary Press and hold this key to momentarily turn the transceiver squelch off. Releasing this key turns the transceiver squelch back on. While squelch is off,
  • Kenwood TK-5330 | User Manual - Page 30
    o TX Audio Equalizer (Midrange) Allows you to set the audio response for midrange frequencies. o TX Audio Equalizer (Low Midrange) Allows you to set the audio response for low midrange frequencies. o TX Audio Equalizer (Low) Allows you to set the audio response for low frequencies. o TX Auto Gain
  • Kenwood TK-5330 | User Manual - Page 31
    FUNCTION DETAILS SCAN Scan is useful for monitoring signals on the transceiver channels. While scanning, the transceiver checks for a signal on each channel and only stops on a channel if a signal is present. To begin scanning, press the key programmed as [Scan]. ● The indicator appears on the
  • Kenwood TK-5330 | User Manual - Page 32
    SCAN REVERT The Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following Scan Revert channels: ● Selected: The last channel selected is assigned as the new revert channel. ● Selected + Talkback: If the channel has
  • Kenwood TK-5330 | User Manual - Page 33
    o Priority Channel Editing If the Priority channel (Priority 1/ Priority 2) has been set as Operator Selectable by your dealer, you can reprogram the Priority channels. Note: ● A zone/ channel must be added to the scan list before the channel can be set as a Priority channel. ● The Priority channel
  • Kenwood TK-5330 | User Manual - Page 34
    DTMF (DUAL TONE MULTI FREQUENCY) CALLS Note: ● DTMF calls can be made only in Analog Conventional and NXDN Conventional Operation. MAKING A DTMF CALL o Manual Dialing (Full key model only) 1 Press and hold the PTT switch. 2 Enter the desired digits using the DTMF keypad. ● The corresponding DTMF
  • Kenwood TK-5330 | User Manual - Page 35
    key programmed as [Menu] to enter Autodial Mode using the Menu Mode. ● The last called unit appears on the display. 2 Press the [ ] key to enter manual input mode. 3 Enter your desired number. ● You can select a digit by using the [J] and [K] keys, and then set the selected digit by pressing the
  • Kenwood TK-5330 | User Manual - Page 36
    Press the [J] and [K] keys to select your desired list number. 3 Press the PTT switch to make the call. MAKING A TELEPHONE CALL (LTR TRUNKING) o Manual Dialing 1 Select the desired zone and telephone group ID. 2 Press the PTT switch to start the call. 3 Enter the desired number using the DTMF keypad
  • Kenwood TK-5330 | User Manual - Page 37
    EMERGENCY CALLS If your transceiver has been programmed with the Emergency function, you can make emergency calls. Note: ● Only the Auxiliary (orange) key and the PF 1 (orange) key of the optional speaker/ microphone can be programmed with the Emergency function. 1 Press and hold the key programmed
  • Kenwood TK-5330 | User Manual - Page 38
    AES (SCM*)/ DES (built-in-DES or SCM*) encryption is available. * SCM (Secure Cryptographic Module) is a hardware cryptographic module developed by JVC KENWOOD to provide cryptographic securities for digital two way radios. ● The transceiver includes a built-in DES that allows you to set up to four
  • Kenwood TK-5330 | User Manual - Page 39
    3 Press the [ ] or [ ] key to set the new Encryption key. Note: ● In NXDN systems, the encryption function does not work when a Key ID which is 0x40 and above is selected. ● To restore to the default Encryption key, select "Preset". However, if you delete the Encryption key, it will not be recovered
  • Kenwood TK-5330 | User Manual - Page 40
    SIGNALING QUIET TALK (QT)/ DIGITAL QUIET TALK (DQT) Your dealer may have programmed QT or DQT signaling on your transceiver channels. A QT tone/ DQT code is a sub-audible tone/ code which allows you to ignore (not hear) calls from other parties who are using the same channel. When a channel is set
  • Kenwood TK-5330 | User Manual - Page 41
    OPTIONAL SIGNALING Your dealer may also program several types of optional signaling for your transceiver channels. o 2-tone Signaling 2-tone Signaling opens the squelch only when your transceiver receives a call containing a matching 2-tone signal. 1 Press the key programmed as [2-tone]. ●
  • Kenwood TK-5330 | User Manual - Page 42
    CLOCK Your transceiver can track the time with its built-in clock. If activated by your dealer, the time will be displayed when the transceiver power is turned ON. Note: ● Removing or leaving the battery pack uncharged for extended periods will cause the clock time to clear. CLOCK ADJUSTMENT To set
  • Kenwood TK-5330 | User Manual - Page 43
    COLOR SCHEME There are four available color schemes as follows. Full Color Full Color White Monochrome Black Monochrome White To select a Color Scheme: 1 Press the key programmed as [Menu] to enter Color Scheme Mode using the Menu Mode. 2 Press the [J] and [K] keys to select your desired color
  • Kenwood TK-5330 | User Manual - Page 44
    BATTERY INFORMATION DISPLAY You can check the detailed information, such as charging condition and temperature, of the Intelligent Battery installed on your transceiver. 1 Press the key programmed as [Menu] to enter Battery Information Display Mode using the Menu Mode. ● The battery information
  • Kenwood TK-5330 | User Manual - Page 45
    mAh, the Battery Health will be 90 %. It is recommended to replace the battery once the Battery Health reaches 50 %. *4 KNB-N4 does not support Date of First Use and Battery Alias, these items are displayed as "- - -" even if the information has been read without error. Note: ● "- -" is displayed
  • Kenwood TK-5330 | User Manual - Page 46
    MULTI LANGUAGE Your transceiver is equipped with multiple language support feature. You can change the language of the text display on the LCD screen and the language of the voice announcement. There are three languages
  • Kenwood TK-5330 | User Manual - Page 47
    2-way Paging Function, and is a protocol owned by JVC KENWOOD Corporation. FleetSync enables a variety of paging functions on your the ID of the station you want to call. ● On full key model transceivers, if Manual Dialing is enabled, you can enter the station ID by using the keypad. 4 Press the
  • Kenwood TK-5330 | User Manual - Page 48
    the entire ID is entered. 4 Press the [I] key to enter Status mode. 5 Press the [J] and [K] keys to select the status you want to transmit. ● If Manual Dialing is enabled, you can enter a status ID using the DTMF keypad or the [J]/[K] key (refer to step 3, above). 6 Press the PTT switch to initiate
  • Kenwood TK-5330 | User Manual - Page 49
    must connect the transceiver to a PC. Ask your dealer for details. ● Long messages can contain a maximum of 4096 characters. GPS REPORT GPS data can be manually transmitted by pressing the key programmed as [Send the GPS Data], or by accessing the Menu {p. 13} . If set up by your dealer, GPS data
  • Kenwood TK-5330 | User Manual - Page 50
    VOICE OPERATED TRANSMISSION (VOX) VOX can be activated or deactivated by your dealer. VOX operation allows you to transmit hands-free. Note: ◆ To operate VOX, you must use an optional headset. o VOX Gain Level Sets the Mic input sensitivity of the VOX operation. 1 Connect a headset to the
  • Kenwood TK-5330 | User Manual - Page 51
    BACKGROUND OPERATIONS TIME-OUT TIMER (TOT) The Time-out Timer can be activated only on Conventional channels and in NXDN Trunking system. It is used to prevent any caller from using a channel for an extended period of time. If you continuously transmit for a period of time that exceeds the
  • Kenwood TK-5330 | User Manual - Page 52
    INDICATOR The signal strength indicator displays the strength of received calls. Strong signal Sufficient signal Weak signal Very weak signal Out of service range (Appears on NXDN Trunking and P25 Trunking channels only) COMPANDER The compander can be programmed only for specific analog channels. If
  • Kenwood TK-5330 | User Manual - Page 53
    SITE TRUNKING (P25 Trunking)/ NETWORK FAILURE (NXDN Trunking) On Trunking channels, if set up by your dealer, the transceiver will indicate a network condition on the registered site. "Site Trunk" (P25)/ "Network Fail" (NXDN) appears on the display when the transceiver receives a network disabled
  • Kenwood TK-5330 | User Manual - Page 54
    Note: ● The communication distance varies depending on the obstacles between the communication devices and the radio wave conditions. ● Only headsets which support the Headset Profile (HSP) certified by Bluetooth SIG can be used with the transceiver. However, operations are not guaranteed in all
  • Kenwood TK-5330 | User Manual - Page 55
    FINDING Bluetooth DEVICES Your transceiver can automatically search for Bluetooth devices. Note: ● Put your Bluetooth headset into pairing standby mode beforehand. 1 Press the [ ] key to enter Menu Mode. 2 Press the [ ] key to select the Bluetooth category. 3 Press the [ ] key or the [J] and [K]
  • Kenwood TK-5330 | User Manual - Page 56
    LED indicator blinks in blue. ● For Bluetooth devices that does not support Simple Secure Pairing, you need to enter a Personal Identification Number (PIN are powered on. If the headset cannot be used automatically, connect manually using the My Device setting in the Bluetooth menu of the transceiver
  • Kenwood TK-5330 | User Manual - Page 57
    o Making hands-free call Press the PTT switch to activate the microphone of the Bluetooth headset. Note: ● The volume level can only be adjusted on the Bluetooth headset. The volume control of the transceiver does not function. However, if the audio is set to output from the built-in speaker of
  • Kenwood TK-5330 | User Manual - Page 58
    USEFUL FUNCTIONS There are some useful functions on your transceiver which allows you to display information of the Bluetooth devices registered to the transceiver and to switch the speaker audio output. o Connecting/ Disconnecting/ Deleting a registered device using My Devices Press the key
  • Kenwood TK-5330 | User Manual - Page 59
    To disconnect a device: 1 Press the [ ] key or the [J] and [K] keys to select the device to disconnect. 2 Press the [ ] or [ ] key to disconnect. 3 Press the [ ] or [ ] key to confirm the disconnection. ● The " " indicator and "Disconnected" appear on the display. To delete a device: Note: ● Make
  • Kenwood TK-5330 | User Manual - Page 60
    3 Press the [ ] or [ ] key to confirm. ● The selected device will be deleted. "BT No Device" appears when there is no other registered device. Note: ● To delete all the registered devices, press and hold the [ ] or [#] key in Step 2. o Checking the information of the devices 1 Press the key
  • Kenwood TK-5330 | User Manual - Page 61
    Device Name [ I ] key Device Address [ H ] key [ H ] key [ I ] key [ I ] key Device Class [ H ] key Device Class Audio/Video Disconnected Connected Phone Computer LAN/Network Peripheral Imaging Wearable Toy Health Note: ● You can also check the information of the devices in the Find
  • Kenwood TK-5330 | User Manual - Page 62
    o Switching the speaker audio output You can switch the audio output between the speaker of the transceiver and the Bluetooth headset. Press the key programmed as [Bluetooth Speaker] to turn the Bluetooth speaker on or off. Alternatively, press the key programmed as [Menu] to enter Bluetooth Mode
  • Kenwood TK-5330 | User Manual - Page 63
    ) connection. (Display for 1 second) The Bluetooth device has rejected a request for pairing or Headset Profile (HSP) connection. (Display for 1 second) The Bluetooth device does not support Headset Profile (HSP) connection. 63
  • Kenwood TK-5330 | User Manual - Page 64
    microSD CARD & BUILT-IN MEMORY You can perform voice recording, voice playback and GPS Data Storage using the built-in memory or a microSD card. USING THE microSD CARD Insert the microSD card into the transceiver and turn on the transceiver. The indicator lights up on the display when the microSD
  • Kenwood TK-5330 | User Manual - Page 65
    ④ Call origin (Auto Recording only) ID information of the call origin when recording starts. "---" is displayed when no ID information is available. ⑤ File extension Voice files are saved as ".WAV", and GPS data files are saved as ".TXT". Note: ● The date format and time format settings do not apply
  • Kenwood TK-5330 | User Manual - Page 66
    Playback You can play back the voice recordings recorded using Auto Recording. 1 Press the key programmed as [Playback] to enter Playback mode. Alternatively, press the key programmed as [Menu] to enter Playback mode using the Menu Mode. ● The voice recordings are listed on the display. 2 Press the
  • Kenwood TK-5330 | User Manual - Page 67
    INDICATOR LIST Indicator Description Displays the signal strength. Displays the battery power. The channel is using high transmit power. The channel is using medium transmit power. The channel is using low transmit power. In Digital mode (Digital Channel) In Analog mode (Analog Channel) In Digital
  • Kenwood TK-5330 | User Manual - Page 68
    Indicator Description Blinks when an incoming call matches your Optional Signaling. A message is stored in the memory. Blinks when a new message is received. The microSD memory card is recognized. The microSD memory card is not recognized. The Vibrator function is activated. Blinks when the
  • Kenwood TK-5330 | User Manual - Page 69
    © 2015 JVC KENWOOD Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
B5A-0970-00 (K)
USER MANUAL
TK-5230
TK-5330
TK-5430