Kenwood TK-7360 User Manual 1

Kenwood TK-7360 Manual

Get Kenwood TK-7360 PDF manuals and user guides View all Kenwood TK-7360 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood TK-7360 manual content summary:

  • Kenwood TK-7360 | User Manual 1 - Page 1
    INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-7360 © B62‑2291‑00 (M2) 09 08 07 06 05 04 03 02 01 00
  • Kenwood TK-7360 | User Manual 1 - Page 2
    Kenwood for your personal mobile applications. This instruction manual covers only the basic operations of your mobile radio. Ask your dealer for information on any customized features they may have added to your radio on fuel or while parked in gasoline service stations. Do not carry spare fuel
  • Kenwood TK-7360 | User Manual 1 - Page 3
    Use only the supplied DC power cable or a Kenwood optional DC power cable. ◆ Do not cut and/or remove the fuse holder on the DC power cable. For passenger safety, install the 2-way paging Function 11 Advanced Operations 13 Background Operations 16 VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT 17 ii
  • Kenwood TK-7360 | User Manual 1 - Page 4
    instructions are for use by your Kenwood dealer, an authorized Kenwood service Instruction manual 1 Preparation Various electronic equipment in your vehicle may malfunction if they are not properly protected from the radio while transmitting. n Power Cable Connection The transceiver operates in
  • Kenwood TK-7360 | User Manual 1 - Page 5
    hex-headed screws. 4 Mount the optional microphone hanger in a location where it will be within easy reach of the user. • The microphone and microphone cable should be mounted in a place where they will not interfere with the safe operation of the vehicle. When replacing the fuse in the DC power
  • Kenwood TK-7360 | User Manual 1 - Page 6
    the microphone plug into this jack. ⑥ Status Indicator Lights blue during a specified mode, based on dealer programming. ⑦ / S / A / / ■ keys Press to activate their programmable functions {page speaker to this jack. ⑬ Power input connector Connect the DC Power Cable to this connector. 
  • Kenwood TK-7360 | User Manual 1 - Page 7
    Display Icon Description Displays the signal strength. Not used. Lights when the GPS position is determined. Signaling is turned off. A DTMF/2-tone call is being received. The Talk Around function is on. Lights while scanning or while paused on a channel. Blinks when scan is temporarily stopped. A
  • Kenwood TK-7360 | User Manual 1 - Page 8
    Lock • Volume Down • LCD Brightness • Volume Up • Lone Worker • Zone Del/Add • Monitor • Zone Down • Monitor Momentary • Zone Up 1 Emergency can be programmed only on the key. When assigned, the dealer must set the key assignment hold to "Enable" and second function as "Emergency". BASIC
  • Kenwood TK-7360 | User Manual 1 - Page 9
    the Volume Press the Volume Up key to increase the volume. Press the Volume Down key to decrease the volume. If Squelch Off has been programmed onto a key, you can use that function to listen to background noise while adjusting the volume level. Selecting a Zone and Channel/Group ID Select the
  • Kenwood TK-7360 | User Manual 1 - Page 10
    on the display when the Priority channel is selected. Temporary Channel Lockout During scan, you can temporarily remove specific channels from the scanning sequence by pressing the key programmed as Scan Delete/Add while Scan is paused at the undesired channel. To temporarily remove a zone, press
  • Kenwood TK-7360 | User Manual 1 - Page 11
    . 1 Select your desired zone and/or channel/group ID. 2 Press the key programmed as Scan Delete/Add to remove a channel or press and hold the key for DTMF calls, you must use an optional microphone with a DTMF keypad. Manual Dialing 1 Press and hold the PTT switch. 2 Enter the desired digits
  • Kenwood TK-7360 | User Manual 1 - Page 12
    on the display. • Additionally, you can press and hold A or # to delete all entries. 4 Press S or to confirm the deletion. Redialing 1 Press the key programmed as Autodial. 2 Press , then 0. • If there is no data in the redial memory, an error tone will sound. 3 Press the PTT switch to make the
  • Kenwood TK-7360 | User Manual 1 - Page 13
    allows you to ignore (not hear) calls from other parties who are using the same channel. Optional Signaling Your dealer may also program several types of optional signaling for your transceiver channels. 2-tone Signaling: 2-tone Signaling opens the squelch only when your transceiver receives a call
  • Kenwood TK-7360 | User Manual 1 - Page 14
    Alphanumeric 2-way Paging Function and is a protocol owned by Kenwood Corporation. Note: If set up by your dealer, your group of stations. ■ Transmitting 1 Select your desired zone and channel. 2 Press the key programmed as Selcall or Selcall + Status. 3 Press / (if the key assignment list selection
  • Kenwood TK-7360 | User Manual 1 - Page 15
    , you can press the Call 1 ~ Call 3 keys to quickly send preprogrammed status messages. You can also manually send status messages. 1 Select your desired zone and channel. 2 Press the key programmed as Status or Selcall + Status. • When pressing the Status key, the target Fleet/ ID is fixed and
  • Kenwood TK-7360 | User Manual 1 - Page 16
    ON or OFF. • Depending on the delay time programmed into your transceiver, the length of time you must hold the Lone Worker key will vary. • "L-WK ON" momentarily appears on the display when Lone Worker is activated. Talk Around During interruptions in service (such as a power failure), you can
  • Kenwood TK-7360 | User Manual 1 - Page 17
    configured as "Enabled") or to select your desired squelch level from 0 to 9. 3 Press S or to store the new setting. Key Lock Press the key programmed as Key Lock to lock the transceiver front panel and microphone keys. • When any key is pressed while Key Lock is active, "LOCKED" momentarily
  • Kenwood TK-7360 | User Manual 1 - Page 18
    the microphone to make your address through the external speaker. 3 Press the Public Address key again to exit Public Address. Horn Alert Press the key programmed as Horn Alert to toggle the Horn Alert function ON or OFF. • The icon appears on the display while Horn Alert is activated. External
  • Kenwood TK-7360 | User Manual 1 - Page 19
    " appears on the display when you press the PTT switch. Use a different channel or wait until the channel becomes free. If your dealer has programmed BCL Override for your transceiver, you can override the BCL by pressing the PTT switch again, immediately after releasing it, when the channel is busy
  • Kenwood TK-7360 | User Manual 1 - Page 20
    & STORAGE UNIT When using the optional VGS-1 voice guide & storage unit, you gain access to the voice can record a voice memo for later playback. 1 Press the key programmed as Voice Memo or press and hold the key programmed as Playback for 1 second. • The duration of recording memory will appear
  • Kenwood TK-7360 | User Manual 1 - Page 21
    play back a recorded conversation, memo, or message. 1 Press the key programmed as Playback. • If the last action on your transceiver was to auto selected recording. Press and hold A or # to delete all recorded data. Voice Guide If set up by your dealer, when changing the zone and/or channel/group ID
  • Kenwood TK-7360 | User Manual 1 - Page 22
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
INSTRUCTION MANUAL
VHF FM TRANSCEIVER
TK-7360
© B62-2291-00 (M2)
09 08 07 06 05 04 03 02 01 00