Kenwood TK-7360 Operation Manual

Kenwood TK-7360 Manual

Get Kenwood TK-7360 PDF manuals and user guides View all Kenwood TK-7360 manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood TK-7360 manual content summary:

  • Kenwood TK-7360 | Operation Manual - Page 1
    INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-7360 UHF FM TRANSCEIVER TK-8360 © B62-2280-10 (C) 09 08 07 06 05 04 03 02 01
  • Kenwood TK-7360 | Operation Manual - Page 2
  • Kenwood TK-7360 | Operation Manual - Page 3
    Kenwood for your personal mobile applications. This instruction manual covers only the basic operations of your mobile radio. Ask your dealer for information on any customized features they may have added to your radio on fuel or while parked in gasoline service stations. Do not carry spare fuel
  • Kenwood TK-7360 | Operation Manual - Page 4
    Use only the supplied DC power cable or a Kenwood optional DC power cable. ◆ Do not cut and/or remove the fuse holder on the DC power cable. For passenger safety, install the 2-WAY PAGING FUNCTION 11 ADVANCED OPERATIONS 13 BACKGROUND OPERATIONS 16 VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNIT 17 ii
  • Kenwood TK-7360 | Operation Manual - Page 5
    instructions are for use by your Kenwood dealer, an authorized Kenwood service Instruction manual 1 PREPARATION Various electronic equipment in your vehicle may malfunction if they are not properly protected from the radio while transmitting. ■ Power Cable Connection The transceiver operates in
  • Kenwood TK-7360 | Operation Manual - Page 6
    headed screws. 4 Mount an optional microphone hanger in a location where it will be within easy reach of the user. • The optional microphone and microphone cable should be mounted in a place where they will not interfere with the safe operation of the vehicle. When replacing the fuse in the DC power
  • Kenwood TK-7360 | Operation Manual - Page 7
    the microphone plug into this jack. ᶈ Status Indicator Lights blue during a specified mode, based on dealer programming. ᶉ / S / A / / ■ keys Press to activate their programmable functions { speaker to this jack. ᶏ Power input connector Connect the DC Power Cable to this connector. 3
  • Kenwood TK-7360 | Operation Manual - Page 8
    DISPLAY Icon Description Displays the signal strength. Not used. Lights when the GPS position is determined. Signaling is turned off. A DTMF/MDC-1200 call is being received. The Talk Around function is on. Lights while scanning or while paused on a channel. Blinks when scan is temporarily stopped.
  • Kenwood TK-7360 | Operation Manual - Page 9
    • OST • Paging Call • Playback • Priority Channel Select • Public Address • Radio Check (MDC-1200) • Revive (MDC-1200) • Scan • Scan Del/Add Volume Up • Zone Del/Add • Zone Down • Zone Up 1 Emergency can be programmed only on the key. When assigned, the dealer must set the key assignment hold to
  • Kenwood TK-7360 | Operation Manual - Page 10
    THE VOLUME Press the Volume Up key to increase the volume. Press the Volume Down key to decrease the volume. If Squelch Off has been programmed onto a key, you can use that function to listen to background noise while adjusting the volume level. SELECTING A ZONE AND CHANNEL/GROUP ID Select the
  • Kenwood TK-7360 | Operation Manual - Page 11
    on the display when the Priority channel is selected. TEMPORARY CHANNEL LOCKOUT During scan, you can temporarily remove specific channels from the scanning sequence by pressing the key programmed as Scan Delete/Add while Scan is paused at the undesired channel. To temporarily remove a zone, press
  • Kenwood TK-7360 | Operation Manual - Page 12
    . 1 Select your desired zone and/or channel/group ID. 2 Press the key programmed as Scan Delete/Add to remove a channel or press and hold the key for DTMF calls, you must use an optional microphone with a DTMF keypad. MANUAL DIALING 1 Press and hold the PTT switch. 2 Enter the desired digits
  • Kenwood TK-7360 | Operation Manual - Page 13
    on the display. • Additionally, you can press and hold A or # to delete all entries. 4 Press S or to confirm the deletion. REDIALING 1 Press the key programmed as Autodial. 2 Press , then 0. • If there is no data in the redial memory, an error tone will sound. 3 Press the PTT switch to make the
  • Kenwood TK-7360 | Operation Manual - Page 14
    which allows you to ignore (not hear) calls from other parties who are using the same channel. OPTIONAL SIGNALING Your dealer may also program several types of optional signaling for your transceiver channels. DTMF Signaling: DTMF Signaling opens the squelch only when the transceiver receives a call
  • Kenwood TK-7360 | Operation Manual - Page 15
    owned by JVC KENWOOD Corporation. Note: If your desired zone and channel. 2 Press the key programmed as Selcall or Selcall + Status. 3 Press / programming. PAGING CALL 1 Select your desired zone and channel. 2 Press the key programmed ■ Transmitting If programmed by your dealer, you can press
  • Kenwood TK-7360 | Operation Manual - Page 16
    will appear on the display. Press any key to return to normal operation. ■ Reviewing Messages in the Stack 1 Press and hold the key programmed as Stack, Selcall, Status, or Selcall + Status. 2 Press / (if the key assignment list selection is configured as "Enabled") or to select your desired
  • Kenwood TK-7360 | Operation Manual - Page 17
    ON or OFF. • Depending on the delay time programmed into your transceiver, the length of time you must hold the Lone Worker key will vary. • "L-WK ON" momentarily appears on the display when Lone Worker is activated. TALK AROUND During interruptions in service (such as a power failure), you can
  • Kenwood TK-7360 | Operation Manual - Page 18
    no signals are present on your selected channel. • The icon appears on the display while Monitor or Squelch Off is activated. Your dealer can program a key with one of four Monitor/Squelch Off functions: • Monitor: Press to deactivate QT, DQT, DTMF, or FleetSync Signaling. Press again to return to
  • Kenwood TK-7360 | Operation Manual - Page 19
    the microphone to make your address through the external speaker. 3 Press the Public Address key again to exit Public Address. HORN ALERT Press the key programmed as Horn Alert to toggle the Horn Alert function ON or OFF. • The icon appears on the display while Horn Alert is activated. EXTERNAL
  • Kenwood TK-7360 | Operation Manual - Page 20
    " appears on the display when you press the PTT switch. Use a different channel or wait until the channel becomes free. If your dealer has programmed BCL Override for your transceiver, you can override the BCL by pressing the PTT switch again, immediately after releasing it, when the channel is busy
  • Kenwood TK-7360 | Operation Manual - Page 21
    STORAGE UNIT When using the optional VGS-1 voice guide & storage unit, you gain access to the voice Reply Message You can set the transceiver to automatically respond to Individual Calls. 1 Press the key programmed as Auto Reply Message. • "AUTO REPLY" momentarily appears on the display. 2 When you
  • Kenwood TK-7360 | Operation Manual - Page 22
    play back a recorded conversation, memo, or message. 1 Press the key programmed as Playback. • If the last action on your transceiver was to auto selected recording. Press and hold A or # to delete all recorded data. VOICE GUIDE If set up by your dealer, when changing the zone and/or channel/group ID
  • Kenwood TK-7360 | Operation Manual - Page 23
    VHF TK-7360 UHF TK-8360
  • Kenwood TK-7360 | Operation Manual - Page 24
  • Kenwood TK-7360 | Operation Manual - Page 25
    鸣谢 KENWOOD 䆜઀ 150 固件版权 保留 KENWOOD i
  • Kenwood TK-7360 | Operation Manual - Page 26
    注意事项 KENWOOD KENWOOD ⌞ᝅ 12V KENWOOD 目录 开始...1 3 5 6 扫描...7 DTMF呼叫...8 信令...10 FleetSync 11 13 16 VGS-1 17 ii
  • Kenwood TK-7360 | Operation Manual - Page 27
    开始 KENWOOD KENWOOD 随机附件 1 • 10 A 4 1 5 × 16 mm 4 4 4 4 1 准备工作 䆜઀ 12V 1 2 3 4 1
  • Kenwood TK-7360 | Operation Manual - Page 28
    䆜઀ 1 4.2 mm 2 3 4 ⌞ᝅ M4 × 6 mm 平垫 弹簧垫 5 × 16 mm 2 安装支架 保险丝 12V
  • Kenwood TK-7360 | Operation Manual - Page 29
    熟悉本机 .    ; =B > 2 8  a b 5页}。 c 5页}。 d e f g / S / A /
  • Kenwood TK-7360 | Operation Manual - Page 30
    显示屏 图标 GPS DTMF/MDC-1200 ID ID ID 4
  • Kenwood TK-7360 | Operation Manual - Page 31
    S、A、
  • Kenwood TK-7360 | Operation Manual - Page 32
    基本操作 PASSWORD 6 1 4。 2 按C • 按A A 3 1和2 4 按S 音量调节 ID ID ID ID ID 10个字符。 ID ID ID ID。 ID ID 1 ID 4 ID ID ID 1 6
  • Kenwood TK-7360 | Operation Manual - Page 33
    2 3 PTT PTT 3～4 扫描 SCAN 2个信道。 信道调出 ID ID 优先扫描 7
  • Kenwood TK-7360 | Operation Manual - Page 34
    ID。 1 ID。 2 1 图标。 图标。 扫描返回 PTT DTMF呼叫 DTMF DTMF 手动拨号 1 按住PTT开关。 2 PTT PTT 自动拨号 DTMF号码。 1 2 B/C 01～16 3 按下PTT 8
  • Kenwood TK-7360 | Operation Manual - Page 35
    1 2 B/C 3 按S 4 5 按C A A 6 4和5 7 按S 8 9 按C A A 10 8和9 11 按S 1 2 B/C 3 按A DELETE A 4 按S 重拨 1 2 0。 3 按下PTT 遥毙 STUN"字样。 9
  • Kenwood TK-7360 | Operation Manual - Page 36
    信令 亚音频(QT DQT) QT或DQT QT亚音／DQT 可选信令 DTMF DTMF DTMF FleetSync 11 MDC-1200：MDC-1200 AFSK MDC-1200的ID MDC-1200 OST) 40对OST。 1 2 OST的键。 TONE OST编号。 3 B/C OST编 01～40 4 5 OST 10
  • Kenwood TK-7360 | Operation Manual - Page 37
    FleetSync FleetSync MDC-1200功能。MDC-1200和FleetSync 选择呼叫 ■ 发射 1 2 3 B/C ID ID。 4 按下PTT ID LED PTT 3位队号和4位ID ID号。 注：ID 寻呼 1 2 PTT列表ID 状态信息 2 10到99 15 11
  • Kenwood TK-7360 | Operation Manual - Page 38
    1～呼叫3 1 2 ID 5 3 B/ C ID ID。 4 按S 5 B/C ID ID。 6 按下PTT ID 1 2 B/C 3 PC 48 15 4096 PC查看。 GPS报告 GPS装置（NMEA-0183 GPS 12
  • Kenwood TK-7360 | Operation Manual - Page 39
    高级操作 紧急呼叫 1 2 态。 L-WK ON"字样。 脱网通信 13
  • Kenwood TK-7360 | Operation Manual - Page 40
    1 1秒钟。 CODE 2 B/C 3 按S QT、DQT、DTMF或FleetSync QT、DQT、DTMF或FleetSync 1 2 B/C 0-9)。 3 按S 按键锁定 LOCKED 14
  • Kenwood TK-7360 | Operation Manual - Page 41
    信号强度 强 中 弱 非常弱 PA) PA 1 2 按住PTT 3 喇叭提示 图标。 显示亮度 15
  • Kenwood TK-7360 | Operation Manual - Page 42
    后台操作 TOT) PTT开关。 辅助端口 图标。 BCL) BCL PTT BUSY BCL PTT BCL。 PTT ID PTT ID ID PTT 压扩器 发射功率 16
  • Kenwood TK-7360 | Operation Manual - Page 43
    VGS-1 利用VGS-1 30 30 图标。 1 1 2 3 按下S 17
  • Kenwood TK-7360 | Operation Manual - Page 44
    1 AUTO REPLY"字样。 2 3 GREETING MSG RCVD MEM FULL"字样。 1 STORE 2 AR VM RM 3 END OF MSG A A 语音指导 ID ID 18
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
INSTRUCTION MANUAL
VHF FM TRANSCEIVER
TK-7360
UHF FM TRANSCEIVER
TK-8360
© B62-2280-10 (C)
09 08 07 06 05 04 03 02 01