KitchenAid KBSD508ESS Dimension Guide

PRODUCT MODEL NUMBERS

Side by Side Built-In Refrigerator

KBSD502E

KBSD508E

KBSN508E

KSSC42FT

KSSC42QV

KSSC48FT

KSSC48QV

KSSO42FT

KSSO48FT

Electrical:

A 115 volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply

is required. It is recommended that a separate circuit serving only your refrigerator be

provided. Use an outlet that cannot be turned off by a switch. Do not use an extension

cord.

Water Supply:

A cold water supply with water pressure between 30 and 120 psi (207

and 827 kPa) is required to operate the water dispenser and

ice maker. If you have

questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply:

IMPORTANT:

The pressure of the water supply coming out of a reverse osmosis system

going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi

(207 and 827 kPa).

OPENING DIMENSIONS

To avoid tipping during use, the solid soffit must be within 1" (2.5 cm) maximum

above the refrigerator. If the solid soffit is higher than 1" (2.5 cm) or one is not

available, then the refrigerator must be braced.

If the anti-tip boards are needed, they must be attached to the rear wall studs 80" to 90"

(203 cm to 229 cm) above the floor. See “Install Anti-Tip Boards” for more information.

NOTE:

A clearance of

Z\x

" (1.3 cm) above the top grille must be maintained in order for

the top grille to be removed.

IMPORTANT:

n

It is recommended that you do not install the refrigerator near an oven,

radiator, or other heat source.

n

Do not install in a location where the temperature will fall below

55°F (13°C).

n

Floor must support the refrigerator weight, more than 600 lbs (272 kg),

door panels and contents of the refrigerator.

6"

(15.2 cm)

24"

(60.96 cm) min.

1"

(2.54 cm)

77"

(196 cm)

6"

(15.2 cm)

6"

(15.2 cm)

A

Width

(see chart following)

B

Dimension

84" (213.4 cm)

to bottom of solid soffit

Model

Width A

(as shown above)

Width A for

Overlay Models

(as shown above)

Dimension B

(as shown above)

36

35

Z\x

" to 35

C\v

"

(90.2 cm to 90.8 cm)

35

C\v

" to 36"

(90.8 cm to 91.4 cm)

4" (10.2 cm)

42

41

Z\x

" to 41

C\v

"

(105.4 cm to 106.1 cm)

41

C\v

" to 42"

(106.1 cm to 106.7 cm)

7

Z\x

" (19.1 cm)

48

47

Z\x

" to 47

C\v

"

(120.7 cm to 121.3 cm)

47

C\v

" to 48"

(121.3 cm to 121.9 cm)

13

Z\x

" (34.3 cm)

NOTE:

Flooring under refrigerator must be at same level as the room. Face of cabinetry must be plumb.

PRODUCT DIMENSIONS

n

The depth from the front of the top grille to the back of the refrigerator

cabinet is 25

C\₈

" (64.5 cm).

n

The power cord is 84" (213 cm) long.

n

The water line attached to the back of the refrigerator

is 5 ft (1.5 m) long.

n

Height dimensions are shown with leveling legs extended

Z\₈

" (3 mm)

below the rollers.

25

³/₈

"

(64.5 cm)

23

¹/₂

"

(59.7 cm)

84" (213.4 cm)

Power Cord

*83

³/₈

"

(211.8 cm)

*3

¹/₂

" (8.9 cm)

*When leveling legs are fully extended to 1

Z\v

" (3.2 cm) below rollers, add

1

Z\₈

" (2.9 cm) to the height dimensions.

SIDE VIEW

TOP VIEW

25

C\₈

"

(64.5 cm)

A

Model

Width A

36

35" (88.9 cm)

42

41" (104.1 cm)

48

47" (119.4 cm )

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10681447A

4/15

KitchenAid KBSD508ESS Dimension Guide

KitchenAid KBSD508ESS Manual

KitchenAid KBSD508ESS manual content summary: