KitchenAid KCM222CU Use & Care Guide - Page 9

4. Place the filter cartridge in the well at the bottom of the water tank. Push the cartridge slightly to make sure it fits snugly. 5. Every time you install a new filter, run the coffee maker through a complete brewing cycle without coffee. Use a full carafe of clean, cool water. To Set the Time-of-Day Clock WARNING Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 2. When the coffee maker is first plugged in or when power is restored after an interruption, the brew timer display will initially show 12:00 PM. 3. For glass carafe models, press the MODE button 5 times to enter the Time/Clock Setting mode. NOTE: For thermal carafe models, press the MODE button 4 times to enter the Time/Clock Setting mode. The Clock indicator will flash while the time is being set. 4. Press the PROGRAM/SET button. The hours digits will flash for the hours adjustment. 5. Press the "+" (plus) or "-" (minus) buttons to increase or decrease the hours. 6. Press the PROGRAM/SET button again. The minutes digits will flash for the minutes adjustment. 7. Press the "+" (plus) or "-" (minus) buttons to increase or decrease the minutes. 8. Press the PROGRAM/SET button again. The AM or PM indicator will flash for the AM/PM adjustment. 9. Press the "+" (plus) or "-" (minus) buttons to select AM or PM. 10. Press and hold the PROGRAM/SET button to program the settings. A short beep will sound indicating programming is complete. NOTE: If you do not hold the Program/Set button until a short beep is heard, the settings will be maintained and the coffee maker will exit to the default mode. 1. Plug into a grounded 3-prong outlet. 9