KitchenAid KHHC2090SBL Installation Instructions
KitchenAid KHHC2090SBL - Architect 2.0 Cu Ft Microwave Oven Manual
 |
UPC - 883049023953
View all KitchenAid KHHC2090SBL manuals
Add to My Manuals
Save this manual to your list of manuals |
KitchenAid KHHC2090SBL manual content summary:
- KitchenAid KHHC2090SBL | Installation Instructions - Page 1
the Microwave Oven 9 Complete Installation 10 VENTING DESIGN SPECIFICATIONS 11 ASSISTANCE 12 Replacement Parts 12 MICROWAVE HOOD COMBINATION SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance - KitchenAid KHHC2090SBL | Installation Instructions - Page 2
REQUIREMENTS The microwave oven is set for recirculation installation. For external (wall or roof) venting, see "Venting Design Specifications" section. Tools and Parts Tools Needed Gather the required tools and parts before starting installation. Read and follow the instructions provided with - KitchenAid KHHC2090SBL | Installation Instructions - Page 3
circuit serving only this microwave oven. GROUNDING INSTRUCTIONS ■ For all cord connected appliances: The microwave oven must be grounded. In microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed - KitchenAid KHHC2090SBL | Installation Instructions - Page 4
INSTALLATION INSTRUCTIONS Remove Mounting Plate NOTE: To avoid possible damage to the work surface, cover the work surface. 1. Remove any remaining contents from the microwave oven cavity. 2. Remove the mounting plate by peeling off the strips of tape that attach it to the back of the microwave - KitchenAid KHHC2090SBL | Installation Instructions - Page 5
deflector 4. Secure vent deflector with 2 mounting screws (1 on each end). A B Roof Venting Installation Only To Remove Roof Damper Vent Cover: 1. Locate the roof damper vent cover on the top of the microwave oven. 2. Using diagonal wire cutting pliers, gently snip out the damper vent cover at the - KitchenAid KHHC2090SBL | Installation Instructions - Page 6
no wall studs exist within the cabinet opening, do not install the microwave oven. 1. Using a stud finder, locate the edges of Corner holes (on mounting plate) B. Cabinet opening vertical centerline C. Wall stud centerlines D. Holes for lag screws E. Support tabs F. Mounting plate center markers 6 - KitchenAid KHHC2090SBL | Installation Instructions - Page 7
Mark Rear Wall The microwave oven must be installed on a minimum of 1 wall stud, preferably 2, using a minimum of 1 lag screw, preferably 2. 1. Using measuring tape, find and clearly mark the vertical centerline of the opening. A Wall Venting Installation Only Centerline Upper cabinet bottom 4" - KitchenAid KHHC2090SBL | Installation Instructions - Page 8
Attach support tabs of the mounting plate facing forward, insert a 1/4-20 x 3" round-head bolt through the corner hole that fits over the 3/4" (19 mm) hole drilled in Step 3 of "Installation cabinet align with the holes in the top of the microwave oven. NOTE: If the upper cabinet has a frame around - KitchenAid KHHC2090SBL | Installation Instructions - Page 9
area. Install the Microwave Oven WARNING Excessive Weight Hazard Use two or more people to move and install microwave oven. microwave oven, do not grip or use the door or door handle while the microwave oven is being handled. B A. Mounting plate B. Support tabs 4. With front of microwave oven - KitchenAid KHHC2090SBL | Installation Instructions - Page 10
or reset the circuit breaker. If the problem continues, call an electrician. ■ Check that the power supply cord is plugged into a grounded 3 prong outlet. ■ See the Use and Care Guide for troubleshooting information. Installation is now complete. Save Installation Instructions for future use. 10 - KitchenAid KHHC2090SBL | Installation Instructions - Page 11
builder/ contractor reference only. NOTES: ■ Vent materials needed for installation are not provided with microwave hood. Rectangular to Round Transition NOTE: The minimum 3" (7.6 cm) clearance must exist between the top of the microwave oven and the rectangular to round transition piece so that - KitchenAid KHHC2090SBL | Installation Instructions - Page 12
service center. When you call, you will need the microwave oven microwave oven door on the front frame of the microwave oven. If you need additional assistance, call us at our toll free number listed in the Use and Care Guide, or visit us on the Web. Replacement Parts If any of the installation
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
MICROWAVE HOOD COMBINATION
INSTALLATION INSTRUCTIONS
MICROWAVE HOOD COMBINATION SAFETY
This product is suitable for use above electric or gas cooking products up to and including 30" (76.2 cm) wide. See
“Installation Requirements” section for further notes.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the
illustration in these installation instructions.
Table of Contents
MICROWAVE HOOD COMBINATION SAFETY
..............................
1
INSTALLATION REQUIREMENTS
...................................................
2
Tools and Parts
...............................................................................
2
Location Requirements
...................................................................
2
Product Dimensions
.......................................................................
3
Electrical Requirements
..................................................................
3
INSTALLATION INSTRUCTIONS
.....................................................
4
Remove Mounting Plate
.................................................................
4
Convert Microwave Oven to External Venting
...............................
4
Locate Wall Stud(s)
.........................................................................
6
Mark Rear Wall
................................................................................
7
Drill Holes in Rear Wall
....................................................................
7
Attach Mounting Plate to Wall
........................................................
8
Prepare Upper Cabinet
...................................................................
8
Install the Microwave Oven
............................................................
9
Complete Installation
....................................................................
10
VENTING DESIGN SPECIFICATIONS
............................................
11
ASSISTANCE
...................................................................................
12
Replacement Parts
.......................................................................
12
8206590
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING