KitchenAid KRSF505ESS Dimension Guide
KitchenAid KRSF505ESS Manual
 |
View all KitchenAid KRSF505ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
KitchenAid KRSF505ESS manual content summary:
- KitchenAid KRSF505ESS | Dimension Guide - Page 1
) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with
-
1
 |
 |
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
Bottom Mount Refrigerator
KRFF507E
KRFF607E
KRFF707E
Electrical:
A 115 volt, 60 Hz, AC only
15- or 20-amp fused, grounded electrical
supply is required. It is recommended
that a separate circuit serving only your
refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not
use an extension cord.
Water:
A cold water supply with water
pressure between 35 and 120 psi
(241 and 827 kPa) is required to operate
the water dispenser and ice maker. If you
have questions about your water
pressure, call a licensed, qualified
plumber.
NOTE:
If the water pressure is less than
what is required, the flow
of water from the water dispenser could
decrease or ice cubes
could be hollow or irregular shaped.
Reverse Osmosis Water Supply:
IMPORTANT:
The pressure of the wa-
ter supply coming out of a reverse osmo-
sis system going to the water inlet valve
of the refrigerator needs to be between 35
and 120 psi (241 and 827 kPa).
If a reverse osmosis water filtration
system is connected to your cold water
supply, the water pressure to the reverse
osmosis system needs to be a minimum
of 40 to 60 psi (276 to 414 kPa).
To ensure proper ventilation for your refrigerator, allow for a
¹⁄₂
" (1.25 cm) of space on each side
and at the top. Allow for a 1" (2.54 cm) space behind the refrigerator. If your refrigerator has an
ice maker, allow extra space at the back for the water line connections. When installing your
refrigerator next to a fixed wall, leave a 3
³⁄₄
" (9.5 cm) minimum space between the refrigerator and
wall to allow the door to swing open.
NOTE:
This refrigerator is intended for use in a location where the temperature ranges from a
minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and provides superior cooling, is between
60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat
source, such as an oven or radiator.
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10668651A
3/15
D
90˚
90˚
C
I
Model
Size
Height -
Overall
“A”
Height - Top
of Cabinet
“B”
Depth -
Doors Open
90°
“C”
Depth - Drawer
Open
“D”
Depth - With
Handles
“E”
Depth - Without
Handles
“F”
Depth - Cabinet
Only
“G”
Width -
Cabinet
“H”
Width - Door
Open 90°
“I”
26.8
70
³⁄₄
"
68
³⁄₄
"
49"
54
³⁄₄
"
36
B⁄,
"
34"
29
M⁄,
"
35
B⁄,
"
39
B⁄,
"
3³/₄
" (9.5 cm)
¹/₂
" (1.25 cm)