Kodak 8500 Digital Photo Printer User Guide - Page 14

FOR LONG OPERATING LIFE UNSUITABLE MATERIALS FOR THE PRINTER Paint coat flaking and plastic deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any other solvent, if rubber or PVC items are left in contact with the unit for a extended period, or if the unit is sprayed with insecticide. CARE OF THE CABINET Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before operating. Never use petroleum base solutions or abrasive cleaners. HEAD ABRASION The thermal print head, like a video head, wears out. When it is worn, it becomes hard to print out fine details of the picture. Then it is necessary to replace the thermal head. Consult your dealer about having the head replaced. CONNECTING DEVICES Read thoroughly the Safety Notices, Cautions and "Operating Precautions" of the instruction booklets for the other devices connected with the unit. CAUTION ON RELOCATING When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a primary cause for damage. Before moving the unit, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices. Also make sure to remove the paper tray. Introduction Setting up the 8500 Printer Operating the 8500 Printer Troubleshooting Site Specifications Accessories and Supplies CONTENTS PRINTER DRIVER GUIDE SEARCH HELP