Kodak DX7440 User Manual - Page 50

7 Troubleshooting When you have questions about your camera, start here. Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD. For updates to Troubleshooting information, see www.kodak.com/go/dx7440support. Camera problems If... Try one or more of the following The camera does not turn on The camera does not turn off and the lens does not retract Camera buttons and controls do not function ■ Remove, then reinsert the battery. ■ Insert a charged battery. ■ Place the camera on a Kodak EasyShare camera or printer dock (sold separately), then try again. ■ Connect the camera to a Kodak 5-volt AC adapter (sold separately), then try again. See page 2 for more battery information. The camera screen does not turn on ■ In any capture mode, press the Display/Info button. ■ Turn the camera off, then on again. To change the camera screen setting so that it is on whenever the camera is on, see Liveview (Auto), page 23. In Review, a blue or ■ Transfer the picture to the computer. black screen is ■ Transfer all pictures to the computer. displayed instead of a See page 42. picture The pictures remaining number does not decrease after taking a picture ■ Continue taking pictures. The camera is operating normally. (The camera estimates the number of pictures remaining after each picture is taken, based on picture size and content.) Picture orientation is ■ Set the Orientation Sensor (page 25). not accurate Flash does not fire ■ Check flash setting, and change as needed (page 15). Battery life is short ■ Wipe the contacts with a clean, dry cloth (page 3) before inserting a battery in the camera. ■ Insert a charged battery (page 2). 44 www.kodak.com/go/support