Kodak DX7440 User Manual - Page 51
Computer/connectivity problems - troubleshooting
UPC - 041771842734
View all Kodak DX7440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Troubleshooting If... You cannot take a picture Try one or more of the following ■ Turn the camera off, then on again. ■ Depress the shutter button all the way (page 7). ■ Insert a charged battery (page 2). ■ Wait until the ready light is green before attempting to take another picture. ■ Transfer pictures to the computer (page 42), delete pictures from the camera (page 30), switch image storage locations (page 23), or insert a card with available memory (page 6). ■ If the camera is in Favorites mode, turn the Mode dial to a different mode. Computer/connectivity problems If... Try one or more of the following The computer does ■ Turn on the camera. not communicate with ■ Insert a charged battery (page 2). the camera ■ Make sure the USB cable is securely connected on the camera and the computer port (page 42). ■ Make sure the EasyShare software is installed (page 35). NOTE: This camera is not supported by Mac OS 8.6 or 9.x. You may capture pictures on a card, then use a card reader to transfer them to the computer. Slide Show does not run on an external video device ■ Adjust the camera Video Out setting (NTSC or PAL, page 25). ■ Make sure the external device settings are correct (see the device's user's guide). www.kodak.com/go/support 45