Kodak ESP 3 User guide - Page 12
local Kodak Call Center - troubleshooting
UPC - 041771756932
View all Kodak ESP 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Chapter 1 Light Status On/Off light is off. The On/Off light is steady green. The On/Off light is flashing green. The On/Off light is steady amber. The On/Off light is flashing red. On/Off Light Cause The printer is turned off. The printer does not have power applied. The printer needs attention. The printer is properly powered up, on, and ready. The printer is busy. The printer is initializing. The printer is calibrating. The printer is preparing to print, copy, or scan. The printer has detected an error condition. The printer has detected an error condition that needs your attention. Action/Solution Press On/Off to turn the printer on. Ensure that the power cord is properly plugged into the back of the printer. Disconnect the power for 5 seconds and reconnect the power. If the problem persists, contact Kodak for assistance. None. You may start printing, copying, scanning, or other tasks. None. Normal operation when performing a print, copy, scan, or other job request. None. Please wait and allow the printer to complete the initialization process (about 30 seconds). If the flashing green persists, you may have an issue with the printer. Visit www.kodak.com for additional troubleshooting steps or contact your local Kodak Call Center. None. Please wait and allow the printer to complete the calibration process (about 5 minutes). None Disconnect power for 5 seconds and reconnect power. If the condition persists, check the Quantity display for additional codes. Contact Kodak for assistance. Check the status monitor (Windows) on your computer for a message. Please check for other lights and follow the instruction for that light. Check the status monitor (Windows) on your computer for a message. 6 Kodak ESP 3 All-in-One