Kodak Z1275 User Manual - Page 56
Try one or more of the following, Adjust the camera Video Out setting NTSC or PAL - troubleshooting
UPC - 417780467082
View all Kodak Z1275 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Troubleshooting If Try one or more of the following In Review mode, ■ Check the image storage location setting (see page 31). you do not see a picture (or the expected picture) on the LCD screen. In Review mode, a ■ Transfer the picture to the computer (see page 45), then format the blue or black card or internal memory (see page 32). screen is displayed Caution: Formatting a card deletes all pictures and videos, instead of a including protected files. picture. Shutter button does not work. ■ Turn on the camera (see page 2). ■ Wait until the Ready light stops blinking red before attempting to take another picture. ■ Transfer pictures to the computer (see page 45), delete pictures from the camera (page 15), switch image storage locations (see page 31), or insert a card with available memory (page 3). Slide show does ■ Adjust the camera Video Out setting (NTSC or PAL, see page 32). not run on external video device. ■ See the external device's user's guide. Picture is too light. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Decrease Exposure Compensation (see page 37). Picture is not clear. ■ Clean the lens (see page 62). ■ Make sure your camera is not in Close-up mode. ■ Move so there is at least 2 ft (0.6 m) between the camera and the subject. ■ Place the camera on a flat, steady surface or use a tripod. 50 www.kodak.com/go/support