Kodak Z1275 User Manual - Page 57

Camera ready light status, Try one or more of the following

Page 57 highlights

Troubleshooting If Try one or more of the following Picture is too dark. ■ Turn on the flash (see page 9). ■ Move so there is no more than 11.8 ft (3.6 m) in wide angle and 6.9 ft (2.1 m) in telephoto between the camera and the subject. ■ Use Fill flash (see page 9) or change your position so light is not behind the subject. ■ Increase Exposure Compensation (see page 37). Camera does not ■ Purchase a certified SD/SDHC or MMC card. recognize ■ Reformat the card (see page 32). SD/SDHC or MMC card. Caution: Formatting a card deletes all pictures and videos, including protected files. ■ Insert a card into the slot, then push to seat (see page 3). Camera freezes up ■ Turn the camera off, then back on. Make sure the camera is turned off when a card is before inserting or removing a card. inserted or removed. Memory card full. ■ Insert a new card (see page 3), transfer pictures to the computer (see page 45), or delete pictures (see page 15). Memory card and internal memory full. ■ Transfer pictures to the computer (see page 45), then format the card or internal memory (see page 32). Caution: Formatting a card deletes all pictures and videos, including protected files. Camera ready light status If Try one or more of the following Ready light does ■ Turn on the camera (see page 2). not turn on and the ■ Install new batteries (see page 1) or charge rechargeable batteries. camera does not work. ■ Turn camera off, then back on. Ready light blinks ■ Camera is operating normally. green. www.kodak.com/go/support 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79

Troubleshooting
www.kodak.com/go/support
51
Camera ready light status
Picture is too dark.
Turn on the flash (
see page 9
).
Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.
Use Fill flash (
see page 9
) or change your position so light is not
behind the subject.
Increase Exposure Compensation (
see page 37
).
Camera does not
recognize
SD/SDHC or MMC
card.
Purchase a certified SD/SDHC or MMC card.
Reformat the card (
see page 32
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Insert a card into the slot, then push to seat (
see page 3
).
Camera freezes up
when a card is
inserted or
removed.
Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
Memory card full.
Insert a new card (
see page 3
), transfer pictures to the computer (
see
page 45
), or delete pictures (
see page 15
).
Memory card and
internal memory
full.
Transfer pictures to the computer (
see page 45
), then format the card
or internal memory (
see page 32
).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
If
Try one or more of the following
Ready light does
not turn on and the
camera does not
work.
Turn on the camera (
see page 2
).
Install new batteries (
see page 1
) or charge rechargeable batteries.
Turn camera off, then back on.
Ready light blinks
green.
Camera is operating normally.
If
Try one or more of the following