Konica Minolta MS6000 MK II MS6000MKII User Guide
Konica Minolta MS6000 MK II Manual
 |
View all Konica Minolta MS6000 MK II manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta MS6000 MK II manual content summary:
- Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 1
MS6000 MKII User's Guide - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 2
- Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 3
standard. For USA and Canada only: The Auto Power Save function becomes available for setting only if the Energy Star Kit is mounted on the Scanner. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 4
P-ii SAFETY INFORMATION This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 5
P-iii SAFETY only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock power cord from the power outlet, and then call your authorized service representative. • Do not use an extension cord, in principle. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 6
power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage. Connect the power - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 7
moves or falls, it may cause personal injury. • Do not store toner units and PC drum units near a floppy disk or watch that are susceptible to magnetism. They could cause these products to malfunction. The inside of this product has areas - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 8
• When moving this product, always hold it by the locations specified in the operator's manual or other toner unit or PC drum unit as poor image quality could result. • Do not use this product in an area where ammonia or other gases or chemicals are present. Failure to do so may shorten the service - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 9
P-vii SAFETY INFORMATION Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result. Use the supplies and consumables recommended by the dealer. Use of any - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 10
troubleshooting tips as well as general precautions to be observed when operating the unit. To ensure the best performance and effective use of your unit, read this User's Guide instructions given in this User's Guide when handling the system and do not touch any part of the system the User's Guide - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 11
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 12
iii Notes to Operators and Key Operators Interference-Causing Equipment Standard (ICES-003 ISSUE 3) (For Canada Users) This Class A digital apparatus 73/23/EEC and 93/68/EEC directives. This declaration is valid for the area of the European Union(EU) only. This device must be used with shielded - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 13
the printer is operated according to the instructions provided in this manual. user operation. Internal Laser Radiation Maximum Radiation Power: 8.8 ×10-4(W) Wave Length: 770-810 (nm) This is a Class IIIb Laser Diode Assy. that has an invisible laser beam. The print head unit is NOT A FIELD SERVICE - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 14
v Safety Information (MSP 3000 Printer) For Denmark ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsttelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 15
vi Safety Information (MSP 3000 Printer) For Norway ADVARSEL: Dersum apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klasse 1. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 16
vii Safety Information (MSP 3000 Printer) OZONE RELEASE (For all Users) During printer operation, a small quantity of ozone is released. This amount is not large enough to cause any adverse affects or harm. However, be sure the room - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 17
viii Safety Information (MSP 3000 Printer) - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 18
Printer 1-5 Care of Printer Supplies 1-5 2. Turning the Power On and Off 1-6 Turning ON 1-6 Turning OFF 1-7 3. Auto Power Save Mode 1-8 Chapter 2 Scanner the Image Density 2-23 Using Auto Exposure 2-23 Using Manual Exposure 2-23 12. Setting the Number of Prints to be Made 2-24 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 19
3000 Printer 1. Parts of the Printer 3-2 2. Troubleshooting and Maintenance 3-4 Replenishing the Paper Supply 3-4 Replacing the Toner Cartridge 3-7 Clearing Misfeeds 3-9 Solving Irregular Printing Problems 3-12 Chapter 4 Miscellaneous 1. Specifications 4-2 MS6000 MKII 4-2 MS6000 MKII+ MSP - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 20
3 Contents 2. Initial Settings 4-4 User Settings on the Control Panel 4-4 User Mode 4-5 Entering and Leaving the User Mode 4-6 Settings in Each User Mode Function 4-7 System Settings by the dealer 4-11 3. System Care 4-14 Cleaning the Scanner 4-14 Cleaning the MSP 3000 Printer 4-15 For Key - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 21
4 Contents - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 22
Safety Notes Chapter 1 1-1 Chapter 1 Safety Notes This chapter provides precautions for use, a description of the operating environment and conditions as well as instructions on how to turn the system ON and OFF. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 23
of service for which it was designed. ‹ A well-ventilated place. ‹ An area which is printer. ‹ A place away from curtains or anything else that is easily flammable. ‹ An area that is safe from spilled water or other liquids. ‹ A dust-free location. NOTE If the Scanner is to be located near a window - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 24
Space Requirements 1-3 1. Installation Precautions 716 mm or 28-1/4" Safety Notes Chapter 1 Scanner There should be a clearance of the following dimensions between the wall and the rear of the unit as well as it's right and left sides - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 25
1-4 1. Installation Precautions Printer For ease of operation, maintenance and replenishment of supplies, the minimum clearance diagrammed below is required. Install the unit in an area that allows easy access. MSP 3000 Printer Safety Notes Chapter 1 150mm 5-7/8" 150mm 5-7/8" 150mm 5-7/8" - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 26
bag in a cool, dark place. ‹ Only use Imaging Cartridges that are exclusively designed for use with this printer. ‹ Keep supplies out of the reach of children. ‹ If your hands become soiled with toner, wash them with soap and water immediately. NOTE Whenever the Imaging Cartridge is removed from the - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 27
blinking. Safety Notes Chapter 1 2 Press the Power Switch of the printer to the I (ON) position. MSP 3000 Printer Useful Tips If you load the film in the film carrier and press the start button while the printer is warming up, you can scan and memorize the film image of about 9 pages (Letter or - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 28
to the O (OFF) position. 1-7 2. Turning the Power On and Off 2 Press the Power Switch of the printer to the O (OFF) position. MSP 3000 Printer NOTE The printer and scanner can be turned ON and OFF at the same time by employing a cord that is equipped with an on/off switch saving both time and - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 29
period of time. When the unit enters the Auto Power Save mode, power to the Scanner projection lamp and the printer heater is automatically shut down to save power consumption. A User Mode function is available that allows the user to set the time it takes the unit to enter the Auto Power Save mode - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 30
Scanner Chapter 2 2-1 Chapter 2 Scanner This chapter identifies different parts of the Scanner and explains its operation. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 31
Chapter 2 2-2 1. System Overview Scanner Projection Lens Single Lens 7.5× Zoom Lens FC-5 9-16× 13-27× 23-50× • Prism Unit • Manual Frame Masking Kit • Foot Switch Kit • Counter Kit • PC Interface Kit Film Carrier Auto-retrieval Controller RFC-21/22A MARS C-4 RFC-9B RFC-15A MARS - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 32
System Overview System Configuration This Scanner is available in the following configurations. PR Mode (MS6000 MKII + Printer) The Scanner is connected to a dedicated printer, allowing scanned images to be printed out directly. Scanner Chapter 2 NOTE Each scanner is designed exclusively for use - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 33
to turn the Prism Unit built into the Scanner, turning the image on the Screen. Projection Lens (Optional): Used to change the size and adjust the focus of the image on the Screen. Fiche Carrier 5 (Optional): Supports the viewing of microfiche. Projection Lamp Unit: Contains are Mirror and Lens - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 34
Scanner Chapter 2 2-5 3. Control Panel Keys and Indicators Control Panel (Basic) Output Tray Selection Cassette1 Cassette2 User Mode Auto Skew Correction Centering/Fit Auto Masking Manual Text Fine Photo Auto Nega Posi Print Mode Resolution Film Type Job Recall Darker Zoom + Auto Zoom - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 35
2-6 3. Control Panel Keys and Indicators Scanner Chapter 2 Output Selection Key: Select the paper feeding source according to the format of the film image that is being reflected in the screen. * This - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 36
rotates from OFF to the Centering and Fit functions. When Auto Masking, Trimming, or Masking are set to off, Auto Masking will automatically be enabled when that had been searched using Auto masking or an image that has been trimmed in the center of the page. Fit: Enlarges a screen image that had - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 37
previous settings for the Masking area are applied. • The manual masking area will be cancelled whenever OFF is selected from the Masking state. * Neither Trimming nor Masking are available through the Auto Masking function. * Trimming and Masking cannot be set when the Scanner is connected to the - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 38
is in the Manual Exposure mode. Shows the number of prints set to be made. Also displays corresponding codes in the event of a malfunction or paper misfeed. The blinking number in this display indicates the Scanner in operation. Blinks when the Imaging Cartridge or Toner Cartridge of the Printer is - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 39
the head of a pen or other device. The next time the scanner is turned ON, that function will appear as a default setting until 7) Masking 8) Auto Skew Correction 9) Horizontal Area setting 10) Vertical Area setting 11) Electrical Zoom 12) Resolution 13 print (scan) of the image shown on the Screen. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 40
Scanner Chapter 2 Control Panel (Shift Function) 2-11 3. Control Panel Keys and Indicators Output Tray Selection Cassette1 Cassette2 User Mode Auto Skew Correction Centering/Fit Auto Masking Manual Text Fine Photo Auto Nega Posi Print Mode Resolution Film Type Job Recall Darker Zoom + - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 41
Indicators Scanner Chapter 2 User Mode Key: Pressing this key together with the Shift Key enters the unit into the User Mode. ☞ See p. 4-6 User the Shift Key, the resolution of the Scanner is set. When the Scanner is connected to the Printer: 4H and 6H When the Scanner is connected to the PC: 2H, - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 42
cable is securely connected. The upper cover of the printer is not closed. Make sure that it is completely closed. The printer is out of paper. Load some paper into the paper cassette. ☞ See p. 3-5. The Scanner is connected to the PC and ready for scanning by pressing the Start Key. This display is - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 43
Scanner A Scanning malfunction A Fan Motor malfunction A Fusing Unit malfunction An Laser malfunction Printer A Polygon Motor malfunction A Main Drive Motor malfunction A Fan Motor malfunction Scanner Printer A Communication malfunction (Printer) A Printer Clock malfunction Scanner - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 44
) The system masks the black bands that run along the edges of the image. Scanner Chapter 2 Trimming (1 Frame) Masking (1 Frame) Auto Centering Fit The system masks everything but the center of the image. * The Manual Frame Masking Kit (option) is re- quired. The system masks the center of the - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 45
the image on the Screen and prints it as necessary. If you would like to use this function, please contact the authorized Technical Representative. Scanner Chapter 2 Image Zoom The system magnifies the screen image according to the size of paper being used. The range of magnification is 1.55x for - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 46
Scanning Scanner Chapter 2 Here is an outline of the printing procedure: 1. Load the film The procedure for loading film is determined by the type of Film Carrier (optional) that is being used. Review the Operator's Manual ☞ See page 2-27. Manual Masking (Masking or Trimming) ☞ See page 2-29. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 47
1: 9 to 16× Type 2: 13 to 27× Type 3: 23 to 50× Scanner Chapter 2 Film Half 35mm Full Half 16mm Full 60 Source 98 Document 325 420 63 70 80 COM 84 120 208 270 Scanning Size 8-1/2"×11" (A4) or or or or This list shows the standard - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 48
Scanner Chapter 2 2-19 7. Replacing the Projection Lens To install a Lens with a magnification different from that already installed in the unit, follow the procedure position according to the type of Projection Lens. TYPE 1 TYPE 2 TYPE 3 3 Slide the Lens Unit into position along the Lens Guide. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 49
the Screen into print size frame. Focusing of the Screen Image Rotate the Focusing Ring Dial to bring the image on the Screen into focus. Scanner Chapter 2 2 Marked on the Screen are the size frame markers corresponding to the paper size (8-1/2"× 11" or A4). Zoom the film image so that it - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 50
If the Auto Skew Correction Key is turned ON, the system will automatically correct any skew of the image when printed. Correction Scanner Chapter 2 NOTE This function supports angle rotations of up to 30°. When the Image Rotation Knob is turned while holding down the Shift Key, the image quickly - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 51
Type Key to select Posi. Posi Auto Nega Posi Film Type Scanner Chapter 2 NOTE • The system cannot determine the polarity of certain types of film. Should this occur, the film type should be selected manually. • The system does not detect exterior conditions such as when the glass - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 52
the Exposure Mode Select Button as necessary to select the Manual Exposure mode. The LED to the left of the key lights down green when the Auto Exposure mode is selected. Darker Darker Auto Auto Lighter Lighter Scanner Chapter 2 2 Depress the appropriate Exposure Adjustment Button, either - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 53
Scanner Chapter 2 2-24 12. Setting the Number of Prints to be Made To Entry the Number of Prints Set the desired number using the Multi-Print - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 54
Scanner Chapter 2 2-25 13. Selecting the Output Format Press the Output Selection Key to select the paper source and print format. Tray Cassette1 Cassette2 Output Selection - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 55
. Crosswise Prints the on-screen crosswise area. Light ON Lengthwise Prints the on-screen crosswise area. Crosswise Prints the on-screen lengthwise area. Blinking Lengthwise Crosswise Prints the on-screen image by automatically judging whether it is lengthwise or crosswise. Scanner Chapter 2 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 56
Scanner Chapter 2 2-27 14. Using Auto Masking The Auto Masking function prevents the frame (non-image area) of a film image from appearing on the print. Selecting Auto Masking 1 Press the Auto Masking key to turn ON this function. Auto Masking Manual Operating Conditions for Auto Masking A. The - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 57
2-28 15. Manual Masking Panels (Optional) Scanner Chapter 2 Vertical Area Indication Panel: Use to specify the vertical print (scan) area of the image on the screen. There are 42 lights placed at 7mm intervals. The lights create a pattern when lit specifying the area on the screen that will be - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 58
the PC mode, the print (scan) area can be defined using the Manual Masking Panels. The Trimming and Masking functions cannot be used in the PC mode. Selecting Trimming 1 Press the (manual) Masking key to select (Trimming). Auto Masking Manual Defining the Print Area 1 Define the end points for - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 59
defined print (scan) area. 1: Horizontal Area Clear Key 2: Vertical Area Clear Key Scanner Chapter 2 Selecting Masking Press the (manual) Masking key to select of the image. (Masking) when you want to mask a given area The basic operation for manual Masking is similar to Trimming. Please refer - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 60
Scanner Chapter 2 2-31 17. Using Centering and Fit Once the image on the Screen has been either "manually trimmed" or "auto masked", the Image Centering function moves the image to the center of the print. The Fit function however, fits the image on the Screen onto the entire surface of the print. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 61
Scanner Chapter 2 2-32 18. Using the Cycle Print Mode This function automatically scans the next image following a preset period of time. Images are manually loaded onto the Carrier Glass in between cycles. This is a system setting that must be entered by an authorized dealer. If you want to use - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 62
change to a "1".) Scanner Chapter 2 NOTE • After the first scanning operation has finished, the system will automatically scan the next image following Copies" value flashes during the "scanning" and "waiting" operations. • The next scanning job can be started manually by pressing the Start key - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 63
connection can be selected between PR (connection to the Printer) and PC (connection to the PC). * For the connection to the PC, the optional interface kit is required. 1 Hold down the Shift Key and the PC/PR Key together for over one second. Scanner Chapter 2 PC/PR Shift PC mode: PR mode - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 64
Resolution The resolution for scanning (printing) can be selected. 1 Press the Shift Key and the Resolution Key together. The present resolution is displayed. Print Mode Shift Resolusion Scanner Chapter 2 2 Press * * 800 dpi can only be selected when the width of scan area is less than 220mm. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 65
Scanner Chapter 2 2-36 21. Registering the Job Program The present setting state can be registered in up to 3 program registration locations (1J, 2J and 3J). 1 Press - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 66
22. Calling the Job Program The registered Job program can be called. 1 Press the Shift Key and the Job Recall Key together. Shift Job Recall Scanner Chapter 2 2 Each time the Job Recall Key is pressed while the Shift Key is held down, the display is switched in order of 1J → 2J - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 67
. Zoom + When the Zoom+ key is pressed together with the Shift Key, the magnification is increased by an increment of 0.01X (up to 2.00X). Scanner Chapter 2 Shift Zoom + Zoom - When the Zoom- key is pressed together with the Shift Key, the magnification is decreased by a decrement of 0.01X (down - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 68
magnification When the Zoom clr key is held down together with the Shift Key for over one second, the standard magnification is resumed. Scanner Chapter 2 Shift Zoom clr The standard magnification is fixed according to the selected paper size. Paper size Standard magnification A3 1.41x B4 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 69
the screen. Shift The screen is gradually darkened until it is turned OFF. When any key is pressed, the illumination returns to the maximum level. Scanner Chapter 2 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 70
job will be cancelled. If the system is operating in the Cycle Print Mode, the scanning operation will stop. CAUTION Do not touch with bare hand and extremely hot Projection Lamp immediately after the scanner has been turned OFF. 1 Place the Power Switch in the OFF position and slide the Projection - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 71
or debris should be wiped clean with a soft, dry cloth. 6 Slide the Projection Unit back into the scanner. NOTE If the Projection Unit is not properly installed, power will not be supplied and the scanner will not operate. Mark 7 Turn the Power Switch ON. 5 Insert the new Projection Lamp all the - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 72
MSP 3000 Printer Chapter 3 3-1 Chapter 3 MSP 3000 Printer This chapter identifies the different parts of the system and explains the MSP 3000 printer's operational procedures. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 73
) Power Switch: Use to open the Upper Unit. Light indicates when the Printer is turned ON. Prints are output from the Printer, face down onto this tray which can hold up to 500 sheets of standard paper. Slide the guides to secure the paper stack. Capable of holding up to 150 sheets of - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 74
: Permanently fixes the image onto the sheet of paper. Interface Connectors: Facilitates connections for the Scanner. * The Printer has two connectors to facilitate connection with two separate Scanner units. Imaging Cartridge: Where the image is generated for transfer onto the sheet of paper - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 75
3-4 2. Troubleshooting and Maintenance Replenishing the Paper Supply Use only the " × 8-1/2", 8-1/2" × 14", 11" × 17" (or A3,B4, A4) plain and recycled paper Up to 150 sheets MSP 3000 Printer Chapter 3 Paper Cassette: 8-1/2" × 11", 11" × 8-1/2", 8-1/2" × 14", 11" × 17" (or A3,B4, A4) plain - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 76
3-5 2. Troubleshooting and Maintenance Loading Paper into the Paper Feeding Tray (Tray) 1 Swing down the Paper Feeding Tray. NOTE • Make sure that the paper stack does not exceed the Maximum Level Indicator. MSP 3000 Printer Chapter 3 2 Fan the paper stack thoroughly and align the edges. • - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 77
3-6 2. Troubleshooting and Maintenance Loading Paper in the Paper Cassette 1 Pull the cassette out of the Printer and open the old one has run out. 4 Close the Cover and insert the cassette into the Printer. 2 Press down the Paper Lifting Plate until it locks. Fan the paper stack thoroughly - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 78
the Toner Cartridge 1 Open the upper unit by pulling the Upper Unit Lock Release Lever forward. 3-7 2. Troubleshooting and Maintenance 3 Take a new Imaging Cartridge out of the box. Holding it with both hands, shake it well in the directions indicated by the arrows. MSP 3000 Printer Chapter - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 79
3-8 2. Troubleshooting and Maintenance 6 Slide the pins located on both sides of the Imaging Cartridge into the grooves of the printer as shown and gently push the Imaging Cartridge securely into place. 7 Close the Upper Unit. MSP 3000 Printer Chapter 3 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 80
3-9 2. Troubleshooting and Maintenance Clearing Misfeeds • If the Misfeed Code (P0) forward. 3 Remove the sheet(s) of paper that caused the misfeed from the Paper Feeding Tray. MSP 3000 Printer Chapter 3 NOTE Push the Print Tray in before opening the Upper Unit. 2 Remove the Imaging Cartridge. 4 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 81
3-10 2. Troubleshooting and Maintenance Clearing a Misfeed from the Paper Cassette 1 Open the Upper Unit by pulling the Upper Unit Lock Release Lever forward. 3 Pull out the Cassette and remove the sheet(s) of paper that caused the misfeed as shown. MSP 3000 Printer Chapter 3 NOTE Push the - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 82
3-11 2. Troubleshooting and Maintenance Clearing a Misfeed from inside the Printer 1 Open the Upper Unit by out as shown. MSP 3000 Printer Chapter 3 NOTE Push the Print Tray in before opening the Upper Unit. 2 Remove the Imaging Cartridge. NOTE • Since the toner has not yet been fixed onto - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 83
3-12 2. Troubleshooting and Maintenance Solving Irregular Printing Problems Use the following procedures to fix minor printing problems. If print quality does not improve after implementing the procedures below, contact the authorized dealer. Symptom Light image Cause Action Print density is - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 84
3-13 2. Troubleshooting and Maintenance Symptom Uneven image density Cause Action Toner in the Imaging Car- Remove the Imaging Car- tridge is not evenly distrib- tridge, shake it several uted. times and replace. A BCDE F A BCDE F A BCDE F A BCDE F A BCDE F Blank print The Printer has - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 85
MSP 3000 Printer Chapter 3 Memo - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 86
4-1 Chapter 4 Miscellaneous This chapter contains the specifications of the unit as well as provides care and maintenance instructions. Miscellaneous Chapter 4 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 87
Standard Accessories: Options: Desk-Top Type Microfilm Scanner 200, 300, 400, 600, 800 dpi (PC Mode) 400, 600 dpi (PR Mode: When MSP 3000 Printer is connected) PC Mode: Binary, Grayscale (Option) PR Mode: Binary SCSI-2 (Option) Automatic & Manual Microfiche, Jackets, Aperture Cards, 16mm & 35mm - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 88
MS6000 MKII+ MSP 3000 Printer 4-3 1. Specifications Type: Printing Method: Resolution: Developing System: Print Size: Print Speed: First Print Time: Warm-up Time: Multiple Printing: Paper Supply: Power Consumption: Printer's Dimensions Printer's Weight Printer's Option: Microfilm Scanner Printer - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 89
, and the system settings that are made by the authorized dealer. User Settings on the Control Panel User Settings Exposure mode Print image density Output Selection Film type Auto Skew Correction Auto Masking Manual Masking Centering/Fit Initial Setting Auto Center A4 (Letter) crosswise Rotation - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 90
to be set or changed as necessary. Setting these default values according to the need of the user saves labor in making settings again each time the power is turned ON or Panel Reset is it becomes wrong. Used to display the number of scan sequences carried out by the Scanner Miscellaneous Chapter 4 - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 91
for 0.5 sec. The Multi-Print Display displays a "U." Output Selection User Mode Shift 2 Press the Exposure Adjustment key (Darker or Lighter) to If the Exposure Mode key is pressed, the setting value is not validated and the User mode initial screen (U) appears. If a new function is to be set, start - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 92
not available. U2: Engineering Enhancement Mode Slight image distortion occurring in the scan direction can be corrected with this function. Before Correction After Correction Miscellaneous Chapter 4 1 Select U2 in the User mode. 2 Press the Exposure Mode key to display d*. 3 Press the Exposure - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 93
for setting only if the Energy Star Kit is mounted on the Scanner. Miscellaneous Chapter 4 U4: Paper Feeding Tray Size The size and direction Paper Feeding Tray can be set with this function. 1 Select U4 in the User mode. 2 Press the Exposure Mode key to display d*. 3 Press the Exposure - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 94
Printer Output On the Screen d4 d2 d2 d1 Feeding Direction (crosswise feeding) d3 d1 d2 d1 d4 d3 Feeding Direction (lengthwise feeding) d4 d3 Miscellaneous Chapter 4 1 Select U5 in the User only when the overlay data is transmitted to the scanner. U6: Year, Month and Date Set Mode - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 95
for the Date Print function when it becomes wrong. 1 Select U7 in the User mode. 2 When the Exposure Mode key is pressed, both the Exposure Display and . Each time the Darker key is pressed, the lit Exposure Display moves upward to select the currently validated setting mode in the following order: - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 96
Auto ON/OFF Power Save mode. * For USA and Canada (120V area), the Auto Power Save mode becomes avail- able only if the Energy Star Kit is mounted on the Scanner. Enabled Disabled * (200V) * (120V) Printer Heater Turns the Printer's heater OFF if the sys- Disabled OFF (PR mode tem is left - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 97
scanner used for the job can be determined after printing. Pattern 1 Pattern 2 Selection Retained Not retained Disabled Pattern 1 Pattern 2 Initial Setting * * Miscellaneous Chapter 4 Paper Paper Cycle print mode This function automatically scans the User Mode. See page of the printer. - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 98
4-13 2. Initial Settings System Settings Description The print function at the time of Toner Empty detection (PR mode only) After a toner empty condition is detected, this function allows you to select either to stop printing or continue printing Auto Film Format Select print function (PR mode - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 99
with a soft, dry cloth. NOTE Before cleaning the Carrier Glass, be sure to remove the Projection Lens from the Scanner. 2 To open the Carrier Glass, pull the handle of the Microfiche Holder. Following the same procedure described in Step 1, wipe the inner surfaces of the Carrier Glass. 3 Dry and - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 100
4-15 3. System Care Cleaning the MSP 3000 Printer Clean the Printer at regular intervals. NOTE • Before cleaning the Printer, turn OFF the power and unplug the cord from the power outlet. • Use a soft cloth and NEVER use abrasives or corrosive detergents. Exterior Panels 1 Clean - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 101
For Key Operator's Use When you need to call for service, the Key Operator should be prepared to provide the following System(s) Indication(s) on the Display, etc. For your reference purpose. Model Name MS6000 MKII Printer (MSP 3000) Serial No. Serial No. Serial No. Serial No. Miscellaneous - Konica Minolta MS6000 MK II | MS6000MKII User Guide - Page 102
konicaminolta.com 0820-7732-01 2004.6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
 |
 |
MS6000 MK
II
User's Guide