Konica Minolta SL1000 Digital Film Scanner SL1000 User Guide
Konica Minolta SL1000 Digital Film Scanner Manual
View all Konica Minolta SL1000 Digital Film Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta SL1000 Digital Film Scanner manual content summary:
- Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 1
SL1000 Digital Film Scanner User's Guide - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 2
International ENERGY STAR® Compliance Statement The purpose of the International ENERGY STAR® Program is to promote the development and popularization of energy-efficient office equipment. - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 3
this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Make sure you observe all of the precautions listed in this manual. * Please NOTE that some parts of the contents of this section - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 4
supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock. the power cord from the power outlet, and then call your authorized service representative. ● Do not use an extension cord, in principle. Use - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 5
smoke, or unusual odor or noise. Immediately turn OFF the Power Switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. ● Do not keep using this product, if this product has - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 6
this product, always hold it by the locations specified in the User's Guide or other documents. If the unit falls it may cause severe personal injury other gases or chemicals are present. Failure to do so may shorten the service life of the product, cause damage or decrease performance. ● Do not - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 7
INFORMATIONS DE SÉCURITÉ Cette section contient des instructions détaillées sur l'utilisation et l'entretien de cette machine. Pour obtenir un rendement optimal de cette machine, il est imperative que toutes les personnes l'utilisant - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 8
contenu dans l'emballage. Si le cordon d'alimentation n'est pas fourni, veillez à vous procurer uniquement un cordon avec fiches conformes aux INSTRUCTIONS POUR LE CORDON D'ALIMENTATION. Le non-respect de cette consigne risquerait de provoquer un incendie. Utilisez le cordon d'alimentation contenu - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 9
INFORMATIONS DE SÉCURITÉ WARNING Ne posez jamais de vase ou tout autre récipient contenant de l'eau, ainsi que de petits objets métalliques tels que des trombones sur l'appareil. Si le récipient venait à être renversé ou des objets métalliques venaient à tomber dans l'appareil, cela risquerait de - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 10
INFORMATIONS DE SÉCURITÉ CAUTION Ne posez aucun objet à proximité de la prise de courant alimentant le cordon car cela risquerait de gêner l'accès au cordon et son retrait en cas d'urgence. Veillez à ce que la prise de courant alimentant l'appareil se trouve à proximité de ce dernier et soit facile - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 11
Please follow the instructions given in this manual when operating the system and do not touch any part of the system the manual does not cover. NEVER attempt to disassemble or rebuild the system. The contents of this manual are subject to change without notice. No part of this manual may be quoted - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 12
choosing our Digital Film Scanner "SL1000" (herein after referred to as "the Scanner"). This User's Guide includes precautions for installation/operation of the Scanner, a system outline, an explanation of the Driver software, operation procedures for the Scanner, troubleshooting tips, maintenance - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 13
(ICES-003 ISSUE 4) For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de to result in interference with radio communications and is prohibited under rules. We declare under our sole responsibility that the Scanner and options to which this - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 14
functions and part names of the Scanner Chapter 3 Application "SL-Touch for SL1000" Describes the application "SL-Touch for SL1000". Chapter 4 Operation Describes operation precautions and procedures, and settings for each function. Chapter 5 Troubleshooting Describes error and warning messages that - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 15
Film Carrier (Option 2-4 Chapter 3 Application "SL-Touch for SL1000 3-1 1 SL-Touch for SL1000 Setup 3-2 1.1 Trademark Acknowledgments 3-2 1.2 System environment 3-2 1.3 Installation the Application Software and the Driver Software .... 3-3 1.4 Uninstall the Application Software and the Driver - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 16
Film Carrier is installed)4-7 4.1 Film Selection 4-7 4.2 Selecting the Film Width 16mm/35mm 4-8 4.3 Loading the Roll Film 4-9 4.4 Feeding the Film 4-13 4.5 Rewinding the Film 4-15 4.6 Operation of the A-type Cartridge Adapter(Option 4-16 Chapter 5 Troubleshooting 5-1 1 Problems of the Scanner - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 17
Chapter 1 Precautions for Installation & Operation - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 18
SL1000 User's Guide 1 Precautions for Installation 1.1 Installation Environment Install the Scanner in a location, which Power Source with little voltage/frequency fluctuations. Power Source: 50 Hz - 60 Hz Voltage Fluctuation: Up to 120 VAC ±10%, 230 VAC ±10% Frequency Fluctuation: Up to 50 Hz - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 19
Chapter 1 Precautions for Installation & Operation 1.4 Space Requirements Secure the recommended space shown in the figure below to ensure easy operation and maintenance of the Scanner. [Standard: Fiche Carrier Model] 1-3 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 20
SL1000 User's Guide [Motorized Roll Film Carrier /Manual Roll Film Carrier Model] 1-4 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 21
to turn the Power Switch OFF, unplug the Power Cord, and call your authorized dealer for appropriate action when the Scanner becomes excessively hot or produces abnormal noise. 2.3 Precautions when operating the Personal Computer Refer to the Operation Manual provided for the Personal Computer. 1-5 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 22
SL1000 User's Guide 2.4 Moving the Scanner When moving the Scanner, observe the following: When carrying the Scanner, hold as shown in the below figure. Be careful not to hurt your back. When moving the Scanner, be sure to disconnect the Power Cord and the USB Cable. When transporting the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 23
Chapter 2 Overview - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 24
. ◆ The real-time view (film image) and the image view (preservation image) can be switched with one touch by operating the special application software (SL-Touch for SL1000). ◆ Various options such as an Motorized Roll Film Carrier, Manual Roll Film Carrier, Manual Switch, etc. are also available - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 25
USB Connector: 8. Power Cord Socket: 9. Security Slot: 10. Power Cord: 11. USB Cable: Scanner condition is shown. Film is set to desired position. Film held in place. To insert, remove or correctly position the fiche film. The area that the hand is placed when the image position is fine-tuned, and - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 26
SL1000 User's Guide 2.2 Roll Film Carrier (Option) 1 3 2 1. Reel Shaft: 2. Take-Up Reel: 3. Guide Roller: 3 Roll Film is inserted. Roll Film is wound. The Roll Film is guided. 2-4 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 27
Chapter 3 Application "SL-Touch for SL1000" - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 28
SL1000 User's Guide 1 SL-Touch for SL1000 Setup It is necessary to install 'SL-Touch for SL1000' in the Personal Computer beforehand to display the image and to take it with a Personal Computer connected with SL1000 the computer connected to the Scanner to install the Driver. The operator should be - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 29
Chapter 3 SL-Touch for SL1000 1.3 Installation the Application Software and the Driver Software NOTE ! Must install "SL-Touch for SL1000" before connecting the Scanner. When the Scanner is connected before "SL-Touch for SL1000" is installed, "Found New Hardware Wizard" is displayed. In this case, - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 30
SL1000 User's Guide 3 When the installation screen appears, Click "Install" for the SL-Touch for SL1000 to begin application installation. 4 If the following screen appears, click the "Run" button. 5 If the following screen appears, click the "Run" button. 6 If the "User - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 31
Chapter 3 SL-Touch for SL1000 7 When the installation screen of "Microsoft .NET Framework 4.0 Client" and "Microsoft SQL CE3.5 SP2" are displayed, click screen is not displayed. 8 When the "Welcome to the InstallShield Wizard for SL-Touch for SL1000" screen appears, click the "Next" button. 3-5 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 32
SL1000 User's Guide 9 When the License Agreement" screen appears, confirm the following messages and click the "Yes" button. 10 Click the "Install" button. 11 When the "Windows Security" screen appears, click "Install this driver software anyway". 3-6 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 33
. 13 Connect the Scanner to the Personal Computer with the USB cable. 14 Turn the Power Switch of the Scanner ON. 15 "Installing device driver software" appears. 16 When "SL1000 Digital Film Scanner Device driver software installed successfully" is displayed, the driver was installed successfully - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 34
ON. 4 From "Start", choose "Control panel", Click "System and Security". Click "Device Manager". 5 Uninstall the "Imaging devices - SL1000 Digital Film Scanner". 6 When the "Confirm Device Uninstall" screen appears, check "Delete the driver software for this device" and click the "OK" button. 3-8 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 35
, click "No" in order not to restart the computer. 8 Turn OFF the Power Switch of the Scanner. 9 From "Start" menu, choose "Control panel". Click "uninstall a program". 10 Select "SL-Touch for SL1000" and then click the "Uninstall" button. 11 When the following window appears, Click "Yes". 3-9 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 36
SL1000 User's Guide 12 When the "Uninstall Complete" screen appears, click the "Finish" button. 13 Restart the Personal Computer. 3-10 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 37
the mode changes into "SL-Touch for SL1000" by connecting the Scanner when start up. NOTE ! Connect the Scanner before you start an application, complete the Application and the Driver Installation. If you start an application before connecting the Scanner will display an error message. SCAN Mode - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 38
SL1000 User's Guide image is displayed. While the film is moving, animation (Follow to movement) is displayed. Moreover, when the film stops, the still picture ( to normal display pressing "Fit", and execute it. The application and the Scanner are operated and set. NOTE ! There is no menu bar in - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 39
Chapter 3 SL-Touch for SL1000 4. Roll Film Carrier The Motorized Roll Film Carrier (Option) is operated. 3-13 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 40
adjusted to the best focus. NOTE ! It may not function correctly due to the condition of the film (density, contrast, and image pattern). In this case, adjust it manually. The polarity of the film ("Positive film" or "Negative film") is selected. The Scanner performs the zoom operation - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 41
Magnifier + Magnifier Fit to Window Chapter 3 SL-Touch for SL1000 The image is counterclockwise and is aligned when the button by "Output Setting". "Scan to Print" cannot be executed from the Manual Switch (Option). The displayed image is magnified continuously and displayed. The magnification is - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 42
SL1000 User's Guide Image the shape and the density of the image. In this case, it adjusts manually. Cropping Mode The Cropping Mode ("Normal Mode" or "Custom Mode") is The continuous scanning screen of the Roll Film is displayed. (The Motorized Roll Film Career of the option is installed.) - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 43
SL1000 Auto Exposure The image density is automatically corrected. NOTE ! It may not function correctly due to the condition of the film correctly due to the condition of the film (density, contrast, and image pattern). In this case, adjust it manually. When the inclination is corrected, the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 44
SL1000 User's Guide Pan Window The window of a whole image (pan window) is displayed at the scan size and the resolution, etc. are variously set. 3.5 Output Setting The application and the Scanner are variously set (Power Saving, etc.). It is necessary to input the password for the setting. 3.6 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 45
format are set. The following settings are read to each user to whom the user is registered. ・ Film Type ・ Monochrome and color film ・ Positive and negative film ・ Zoom position ・ Image rotation ・ Reversing image ( right and left) The proper zoom position is set to the aperture card. The proper zoom - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 46
SL1000 User's Guide The proper zoom position is set to the 16 mm Roll Film. NOTE ! When the Motorized Roll Film carrier is installed, the screen of the Roll Film Carrier is displayed. The proper zoom position is set to the Micro Fiche Film 60F or 98F. The proper zoom position is set to the Micro - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 47
Chapter 3 SL-Touch for SL1000 3.3 Image Adjustment The display and the image quality when scanning are adjusted. The adjusted value is in real time reflected in the displayed image. "Standard - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 48
SL1000 User's Guide 2. Adjustment again, and 1) to 4) is executed. NOTE ! A specified frequency of "Selected" is eight places or less. The adjusted image returns and "Skew correction" are executed, and the scan image of the film is changed. The selection range frame is not changed at the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 49
4. Contrast 5. Sharpness Chapter 3 SL-Touch for SL1000 The contrast of the image is adjusted. High The is made softer. NOTE ! Even if "Brightness" and "Contrast" are adjusted according to the film, an appropriate image density might not be obtained. In that case, it might be improved by - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 50
SL1000 User's Guide Advance Mode When the reading color is "Color" or "Monochrome binary", the following items can be set. Image Type: Color Image Type: Monochrome binary (manual) 6 7 8 9 6. Hue 7. Saturation 8. Lightness The hue of the color image is adjusted. The saturation of the color - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 51
the exposure lamp are set. 1 Chapter 3 SL-Touch for SL1000 1. Lamp Illuminance Quantities of light of the exposure lamp are set. The exposure lamp is lightened. The image lightens for the positive film.. The image darkens for the negative film. The exposure lamp is darkened. The image darkens for - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 52
SL1000 User's Guide 3.5 Output Setting The scan setting, the output setting and printer setting when "Scan to File" and "Scan to Print" are executed are set. 1 3 4 2 10 5 11 6 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 53
7. Resolution 8. Image Type Chapter 3 SL-Touch for SL1000 The input batch is preserved. When "Save" is clicked Film "Color Film" is selected: Only the Color (24bit) can be selected. When film "Monochrome Film" is selected: It can be selected according to 4 selections (Gray Scale (8bit), B/W (Manual - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 54
SL1000 User's Guide 9. Edit 10. Save In "Masking" and "Centering" are set. 1. Masking: When a size that is larger than the image that has been selected, the outside of - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 55
Chapter 3 SL-Touch for SL1000 11. File Name 12. File Number 13. Format The character of a fixed part of the file name is set. Sequential number for the file name - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 56
User's Guide 3.6 Preferences The Application and the Scanner Settings are saved. It is necessary to input the password to display the screen in the environmental setting. NOTE ! The password of default is "0000". To initialize the password when the password was forgotten, contact the Servicing - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 57
for SL1000 3. Ask Before Output It displays on the confirmation screen before the scan image is output when "The scan image is displayed" is "ON". For Scan to File Scan to Print 4. White Balance 5. Color Correction 6. ICC Profile 7. Auto Contrast 8. Digital GEM 9. Put the Scanner to Sleep - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 58
SL1000 User's Guide 15. Move Up 16. Move Down 17. Reset 18. Show Text of Icons window by the sidebar. SCAN Mode VIEW Mode 22. Launch Film Selection at Startup 23. Use operation sound When the application is started, the "Film Selection" screen is displayed. When the application starts, and the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 59
for SL1000 25. Add User 26. Change Password 27. Maintenance Mode 28. OK 29. Cancel The selection user is registered by "Film selection". 3.7 Add User When the screen of "Preference" is accessed, the password is changed. 3.8 Change Password The device is adjusted in this area. Only Service - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 60
SL1000 User's Guide 3.7 Add User 1 4 2 3 1. User Name 2. Delete 3. Save 4. Current Setting The user who displays on the film the user is preserved. The following setting is preserved by the user. Film Kind, Film Type, Film Polarity, Zoom, Rotate, Horizontal Flip NOTE ! It can not be - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 61
" screen can be changed. 1 2 3 Chapter 3 SL-Touch for SL1000 1. Old password 2. New password 3. Confirm new password The password set now is input. NOTE ! The default password is "0000". The new password is input. The password can set only 4 digit numeral. The password is input again for the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 62
SL1000 User's Guide 4 VIEW Mode Screen The image file preserved in the SCAN Mode is displayed and it can be edited. NOTE ! It is possible to display only with the batch file preserved with the connected Scanner. 1 2 3 1. Thumbnail 2. View Window 3. Toolbar 3-36 The image preserved in the batch - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 63
4.1 Toolbar to SCAN Mode Open Chapter 3 SL-Touch for SL1000 It changes to the SCAN Mode. NOTE ! When the Scanner is not connected, it does not change to the SCAN Mode. The registered batch is opened. Save Print The edited image is overwritten and preserved. - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 64
SL1000 User's Guide 4.2 Image Adjustment The image quality of the image being displayed now can be adjusted. 1 2 3 4 1. Histogram 2. Adjustment Area Distribution and the Mean Value of the Histogram - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 65
3. Brightness 4. Contrast Chapter 3 SL-Touch for SL1000 The brightness of the image is adjusted. The contrast of the image is adjusted. NOTE ! The proper image density can be obtained by adjusting "Brightness" and "Contrast" to distribute the Histogram in the whole area. 3-39 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 66
SL1000 User's Guide 4.3 Convert multi-page The selected image is converted from the image preserved in the batch into the multi page file. 3 5 6 7 8 9 1 2 4 10 1. File Name 2. Format 3. Export - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 67
9. Delete original file after export 10. Export 11. Close Chapter 3 SL-Touch for SL1000 After the multi page is exported, the selected original file is deleted. The export to the multi page file begins. This key changes into "Cancel", - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 68
SL1000 User's Guide 5 Roll Film Carrier When the option "Motorized Roll Film Carrier" is utilized, it can be operated from "Roll Film Carrier" screen of the application. 5.1 Roll Film Carrier Rewind The film is rewound. NOTE ! Only when the Fiche Glass is opened, it can be operated. When the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 69
Chapter 3 SL-Touch for SL1000 Film Feeding The film feeding is continued in the forward direction (FWD Direction) while pressing "FWD", and stops when "FWD" is released. slow fast Film Feeding The film rewinding is continued in the reverse (REV Direction) direction while pressing "REV", and - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 70
SL1000 User's Guide 5.2 Multiple SCAN The frame (image) on the Roll Film is automatically detected, and the scan image is preserved in the file. 1 2 3 4 1. Film Operating Direction 2. Set Frame Counter 3. Counter 4. SCAN 5. Close 5 When continuously scanning, the film operating direction is set. - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 71
Chapter 3 SL-Touch for SL1000 5.3 Multiple SERACH The frame (image) on the Roll Film is automatically detected, and it displays on the screen at constant intervals. 1 2 3 4 1. Film Operating Direction 2. Interval 3. Set Frame Counter 4. Counter 5. SEARCH 6. Close 5 6 When continuously scanning, - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 72
SL1000 User's Guide 3-46 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 73
Chapter 4 Operation - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 74
SL1000 User's Guide 1 Precautions for Operation 1.1 Main Unit The following sections require special attention when operating the Scanner prohibit leaning on it. 1.2 Roll Film Carrier (Option) The following sections require special attention when operating the Scanner. Do not put anything on top - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 75
NOTE ! When the USB Cable that connects this machine with the computer is not securely connected, scanner image data cannot be read. 2.2 Turning OFF the Power Switch 1 Quit the application (SL-Touch for SL1000). 2 Press the Power Switch to the OFF ("O" Position). Power Switch NOTE ! Do not turn OFF - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 76
SL1000 User's Guide 2.3 Power Saving Features The Exposure Lamp goes OFF, and the Indicator Lamp flashes when the Scanner has not been used is done. It also returns from Sleep Mode if the Manual Switch is pressed once, when the Manual Switch (Option) is utilized. It also returns from Sleep - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 77
Table. And, prohibit lean against the Fiche Carrier as is could cause damage. 2 Insert the film between the Fiche Glasses. Aperture Card Place the Card so that the film area is on the right side, face-up. Fiche, Jacket Film Place the film so that the title is toward the rear and face-up. 4-5 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 78
SL1000 User's Guide 3 Position the Fiche Film on the Fiche Glass as shown on the figure below. Fiche Film Fiche Film Setting 4 Place hands to both sides of the grips of the Fiche Carrier and fine-tune the image position. Left Grip Right Grip 4-6 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 79
Chapter 4 Operation 4 Operating the Roll Film (When optional Roll Film Carrier is installed) 4.1 Film Selection 1 Open the "Film Selection" screen in "SCAN Mode", and select the Roll Film ("35 mm Roll Film" or "16 mm Roll Film") and the User (Registered Roll Film User Setting). NOTE ! If the Roll - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 80
SL1000 User's Guide 4.2 Selecting the Film Width 16mm/35mm 1 Pull out the front part of the Guide Roller, then reverse the directions of the roller and insert again. 2 Change the position of other Guide Rollers in the same manner (4 pieces in total). NOTE ! All of the directions of the Guide Rollers - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 81
Reel Shaft and unwind the Leading Edge of the Film. NOTE ! Be sure to set the film so that its winding direction is clockwise. The film will not be correctly rewound if the open reel Roll Film is mounted in the opposite direction. Install the Roll Film to the reel so that the square hole - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 82
SL1000 User's Guide 3 Insert the Leading Edge of the Film between the Fiche Glasses. NOTE ! Route the film referring to the figure below. 4 Insert the Leading Edge of the Film into the slit in the Take-Up Reel and rotate the Take-Up Reel two to three turns so that the Film Leader is wound around the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 83
Manual Roll Film Carrier 1 Remove the knob from the Reel Shaft. Knob Chapter 4 Operation 2 Mount the Roll Film onto the Reel Shaft and unwind the Leading Edge of the Film. NOTE ! Be sure to set the film so that its winding direction is to be clockwise. The film will not be correctly rewound if - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 84
SL1000 User's Guide 3 Insert the knob in the Reel Shaft. Knob NOTE ! When the knob is inserted, D the Fiche Glass will then open. 5 Insert the Leading Edge of the Film between the Fiche Glasses Plate. 6 Insert the Leading Edge of the Film into the slit in the Take-Up Reel and rotate the Take-Up Reel - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 85
is locked when a key is double-clicked, and it keeps feeding the film at the same speed. The film feeding stops when "Stop" is clicked at the lock condition. NOTE ! If you feed the film at high speeds, pull the Carrier Handle completely forward and then operate the Speed Control Button with the - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 86
SL1000 User's Guide Manual Roll Film Carrier 1 When the forwarding or the rewinding knob is turned, the film is advanced or reversed. NOTE ! The knob can be operated when the handle of the Carrier Table is pulled out to maximum, which opens the Fiche Glass for film high-speed feeding. 4-14 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 87
is rewound. NOTE ! When Fiche Glass is not open completely, "Rewinding" cannot be operated. When the film is finished being rewound, the motor will stop automatically after a few seconds. Manual Roll Film Carrier 1 Grasp the Carrier Handle and pull it gently out as far as it will go. This causes - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 88
SL1000 User's Guide 4.6 Operation of the A-type Cartridge Adapter(Option) When the 16mm Cartridge Film (type: ANSI) is used. 1 Mount the 16mm Film Cartridge (type:ANSI) onto the Reel Shaft in the figure below and unwind the Leading Edge of the Film. NOTE ! ・Be sure to set the film cartridge so that - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 89
with the A type cartridge adaptor installed. 1 Mount the 16mm or 35mm Film (Open-Reel) onto the Reel Shaft in the figure below and unwind the Leading Edge of the Film. 2 Insert the film between the upper and lower fiche glass. NOTE ! Set the film as shown in the figure below. CAUTION ・ Do not set it - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 90
SL1000 User's Guide 4-18 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 91
Chapter 5 Troubleshooting - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 92
SL1000 User's Guide 1 Problems of the Scanner When any error occurs in the Scanner, an error message appears on the screen of the Personal Computer and on the Operation again. If the same message appears again, call your Authorized Dealer and inform the trouble details and the Scanner condition. 5-2 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 93
Mode. If you use the Scanner, power ON the Scanner and switch the software to the SCAN Mode. ・When using the SCAN Mode, Scanner Power Switch is turned OFF/ON and change to the SCAN Mode. ・ Close the Warning Screen for the VIEW Mode, and try the operation again. Film Search A target frame was not - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 94
SL1000 User's Guide 2.3 Errors shown on the Personal Computer Screen Error message Action SL-Touch Error Cannot find the Scanner. Connect the Scanner to the PC, install the driver, then boot up the software. ・Start the application after connecting the Scanner with the Personal Computer, and - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 95
SL-Touch Error Failed to read the HotPixel Data. The "Shading" adjustment must be completed. ・It is necessary to adjust the Scanner ・Please contact the Authorized Dealer for Service, and explain the detail of the error and condition. SL-Touch Error Failed to read the White Balance Data. The "White - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 96
SL1000 User's Guide 3 Trouble when scanning an image Trouble content The Scanner does not start. Action • Is it connected properly? Check if the USB Cable connected firmly with the Scanner and the Personal Computer. When a problem cannot be solved even after the troubleshooting described above - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 97
Chapter 6 Maintenance - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 98
SL1000 User's Guide 1 Maintenance The following daily checks and cleaning are required to ensure the best possible performance and utmost safety for the Scanner. 1.1 Daily checks 1 Any of the following conditions could damage the Scanner or other electrical equipment. Move the Scanner immediately - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 99
a soft cloth. 2 Remove the dust with the air blower or the brush. Guide Roller It might not be able to wind up the film when dirt adheres in the guide roller. Guide Roller Inside of Guide Roller 1 Clean the inside of the guide roller with the cotton pad etc. NOTE ! "Cleaning kit for the camera" like - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 100
SL1000 User's Guide 6-4 - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 101
Chapter 7 Product Specifications - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 102
SL1000 User's Guide 1 Major Specifications Type Digital Film Scanner Image Sensor Area Type Color CCD Sensor (14.22 Mega pixels) Light Source White LED for color Lens Magnification Optical Zoom:6.8 - 54x Optical Zoom + Electrical Zoom:6.8 - 105x Focus Adjustment Auto or Manual Optical - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 103
Areas: RoHS compliant North America: UL/CSA, FCC Class A Europe :CE (CB、EN class B), LED regulation North America: Energy Star Europe: ErP directive Motorized Roll Film Carrier Kit Manual Roll Film Carrier Kit A Type Adapter Kit M Type Adapter Kit - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 104
Key Operator's Use When you need to call for service, turn OFF the Power Switch first, and unplug the number, condition or system(s) indication(s) on the display. Etc. For your reference purpose. Model Name SL1000 Serial No. Serial No. Attached Accessories Serial No. Serial No. Application SL - Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 105
- Konica Minolta SL1000 Digital Film Scanner | SL1000 User Guide - Page 106
2011.11 Copyright 2011 KYOKKO SEIKO CO., LTD. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. Manufactured For Konica Minolta by Kyokko Seiko 100 Williams Drive Ramsey, NJ 07446 7170-7002-01
SL1000 Digital Film Scanner
User’s Guide