Konica Minolta bizhub C451 bizhub C451 Enlarge Display Operations User Guide
Konica Minolta bizhub C451 Manual
View all Konica Minolta bizhub C451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub C451 manual content summary:
- Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 1
User's Guide [Enlarge Display Operations] - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 2
bizhub C451 User's Guide [Enlarge Display Operations] contains details on the operation of the various functions available in the Enlarge Display mode of the bizhub C451 and properly, be sure to read the accompanying Quick Guide [Copy/ Print/Fax/Scan/Box Operations]. Views of the actual equipment may - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 3
Explanation of manual conventions Introduction 7 CAUTION CAUTION % Failure to observe instructions highlighted in this manner may result in serious injuries or property damage. Observe indicates sections containing additional information. If necessary, refer to the indicated sections. x-2 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 4
Introduction [ ] Names highlighted as shown above indicate keys on the control panel and buttons in the touch panel. C451 x-3 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 5
on the original glass 1-19 1.6 Specifying document settings 1-21 Copying documents of mixed sizes ("Mixed Original" setting 1-22 Loading folded documents ("Z-Folded Original" setting 1-26 x-4 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 6
double-sided copies 2-17 2.6 Selecting a combined copy setting ......2-20 2.7 Selecting Finishing settings 2-22 Selecting the finishing method 2-24 Selecting Staple/Punch settings 2-25 Selecting a folding or binding setting ... 2-28 2.8 Selecting not to rotate the image .........2-31 C451 x-5 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 7
Selecting a Paper Type setting 2-40 Printing double-sided copies manually 2-44 Selecting a Paper Size setting 2-47 2.12Scanning the next 3 Using fax/scan functions 3.1 General fax/scan operation 3-2 3.2 Specifying a destination 3-6 Selecting a destination from the address book 3-8 Selecting - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 8
Duplex 3-22 Original Type 3-24 Resolution 3-28 Density 3-30 File Type 3-32 Color (Image Adjust 3-34 Background Removal (Image Adjust) ... 3-37 Scan Size 3-40 Original Settings 3-42 3.4 Using a name appears 4-2 When the screen to enter the account name and password appears 4-8 C451 x-7 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 9
Introduction x-8 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 10
1 Before use Before use Chapter 1 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 11
panel parts and their functions 2 Note For details, refer to the User's Guide [Copy Operations], the User's Guide [Network Scanner Operations], the User's Guide [Fax Operations] and the User's Guide [Network Fax Operations]. 1 2 3 4 19 18 5 17 6 16 15 14 7 13 12 11 10 98 1-2 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 12
enters a state where it conserves energy. 4 [Mode Memory] Programmed fax/scan settings can be key recalled to be used again. (See the Meter Count key screen and the Utility screen. 6 [Reset] key Press to clear all settings (except programmed settings) entered in the control panel 56) C451 1-3 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 13
job. 10 Data indicator Flashes in blue while a print job or fax is being received. Lights up in blue while a print job or fax is queued to be printed or is being printed. 11 [C] (clear) key Press to clear a to display the screen for specifying settings for user accessibility functions. 1-4 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 14
the machine is in Fax/Scan mode, the indicator on the [Fax/Scan] key lights up in green. 19 [Copy] key Press to enter Copy mode. (As a default, the standard-sized Copy mode screen is displayed.) While the machine is in Copy mode, the indicator on the [Copy] key lights up in green. C451 1-5 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 15
the left. Adjust the control panel to the angle that allows for easy operation. Upper position (base position) Middle position Lower position { Left tilt position 1-6 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 16
release lever 2 To tilt the control panel to the left, hold the bottom of the control panel, and then tilt the panel to the left. C451 1-7 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 17
Before use Chapter 1 1 Before use - Do not grab the touch panel when turning the control panel to the left or right. 1-8 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 18
mode Displaying screens in Enlarge Display mode 1 Press the [Copy] or [Fax/Scan] key in the control panel to display the desired screen. 2 Press settings specified in Accessibility mode, a message appears, requesting confirmation to cancel the settings that cannot be specified in Enlarge - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 19
] key. On the Accessibility Setting screen 2/ 2, touch [Default Enlarge Display Settings], press the [Copy] key or the [Fax/Scan] key, and then specify "Current Setting". The default settings can be also changed in Utility mode. For details, refer to the User's Guide [Copy Operations]. 1-10 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 20
on the touch panel with force, and never use a hard or pointed object to make a selection in the touch panel when there is a message indicating that a print error occurred. Touch this button to display the message, or the machine requires maintenance. Touch this button to display - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 21
an error occurred during an image stabilization operation, a print operation or a scan operation. Touch this icon to view a screen containing a warning code. . Appears when an error occurs with the connection to the POP server. Indicates that "Enhanced Security Mode" is set to "ON". 1-12 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 22
Before use Chapter 1 Before use 1 Paper type icons 2 Note For details, refer to the User's Guide [Copy Operations]. If paper other than plain paper is specified for the selected paper tray when using a copy function, the icon indicating the paper type - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 23
1 Paper type icons that appear Thick 1 Thick 1+ Before use Thick 2 Thick 3 Thick 4 Single Side Only Transparency Envelope Letterhead Special Paper Colored Paper Duplex 2nd Side/ Plain Paper Duplex 2nd Side/ Duplex 2nd Side/ Duplex 2nd Side/ Thick 1 Thick 1+ Thick 2 Duplex 2nd Side - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 24
is selected. For details about the screen for selecting the paper size, refer to "Selecting the Paper settings" on page 2-8. Paper supply icons that appear C451 1-15 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 25
Before use Chapter 1 1 Icon Before use Description This icon indicates that very little paper remains in the paper tray. This icon indicates that paper is not loaded in the paper tray. 1-16 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 26
1.5 Feeding the document 2 Note For details, refer to the User's Guide [Copy Operations], the User's Guide [Fax Operations] and the User's Guide [Network Fax Operations]. The document can be fed in either of the following ways. order to be scanned with the side to be scanned faces up. C451 1-17 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 27
Before use Chapter 1 1 Before use - Load the original pages so that the top of the original is toward the back or the right side of the machine. A A 2 Slide the lateral guides against the edges of the document. Lateral guides 1-18 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 28
the original is toward the back or the left side of the machine. When loaded in the v orientation: When loaded in the w orientation: 20° 20° C451 1-19 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 29
Before use Chapter 1 1 Before use 3 Align the document with the mark in the back-left corner of the document scales. Document scales 4 Close the ADF. 1-20 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 30
document settings 2 Note For details, refer to the User's Guide [Copy Operations]. To make desired copies, specify status, direction and other setting items for originals. For details on selecting the document type when using fax/scanning functions, refer to "Original Settings" on page 3-42 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 31
Before use Chapter 1 1 Before use Copying documents of mixed sizes ("Mixed Original" setting) Documents of different sizes can be loaded together into the ADF to be fed and scanned one by one automatically. 1 Slide the lateral guides of the ADF to fit the size of the largest page. 1-22 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 32
. 3 Place the original in the original feed tray in the order to be scanned with the side to be scanned faces up. - Slide the lateral guides against the edges of the original. C451 1-23 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 33
Before use Chapter 1 1 Before use - Load the original pages into the ADF so that the top of the pages is toward the left side of the machine. Lateral guides 4 In the main screen, touch the Original/Density tab. The Original/Density screen appears. 1-24 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 34
Before use Chapter 1 Before use 1 5 Touch [Mixed Original]. - To cancel the "Mixed Original" setting, touch [Mixed Original] again to deselect it. C451 1-25 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 35
before loading them into the ADF. If the document is copied without being unfolded, a paper misfeed may occur. 1 Position the document to be copied. 1-26 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 36
Before use Chapter 1 Before use 1 2 In the main screen, touch the Original/Density tab. The Original/Density screen appears. 3 Touch [Z-Folded Original]. - To cancel the "Z-Folded Original" setting, touch [Z-Folded Original] again to deselect it. C451 1-27 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 37
machine. Select this setting for a document placed on the original glass with the top of the document toward the left side of this machine. 1-28 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 38
document" on page 1-17. 2 In the Basic screen, touch [Duplex/Combine]. Otherwise, touch the Original/Density tab. 3 Touch [Original Direction]. From the Duplex/Combine screen C451 1-29 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 39
Before use Chapter 1 1 From the Original/Density screen Before use The Original Direction screen appears. 4 Touch the button for the orientation of the loaded document, and then touch [OK]. - To return to the main screen, touch [Main Screen]. 1-30 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 40
of the document is selected. 1 Position the document to be copied. - For details on positioning the document, refer to "Feeding the document" on page 1-17. C451 1-31 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 41
tab. 3 In the Duplex/Combine screen, touch [Original Binding Pos.]. Otherwise, touch [Binding Position] in the Original/Density screen. From the Duplex/Combine screen 1-32 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 42
Before use Chapter 1 Before use 1 From the Original/Density screen 4 Touch the button for the desired binding margin position, and then touch [OK]. From the Original Binding Position screen C451 1-33 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 43
Before use Chapter 1 1 From the Binding Position screen Before use - To return to the main screen, touch [Main Screen]. 1-34 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 44
2 Using copy functions Using copy functions Chapter 2 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 45
functions 2.1 General copy operation 2 Note For details on the copy operation, refer to the User's Guide [Copy Operations]. This section contains information on the general operation for making copies. 1 Press the positioning the document, refer to "Feeding the document" on page 1-17. 2-2 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 46
settings, refer to page 1-21. - For details on selecting the Color setting, refer to page 2-5. - For details on selecting the Paper Finishing settings, refer to page 2-22. - For details on specifying settings to not rotate the image, refer to page 2-31. - For details on selecting the document image - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 47
Chapter 2 2 Using copy functions - To cancel the setting and select the default, press the [Reset] key. 4 Using the keypad, type in the desired number of copies. - If the number of copies was incorrectly entered, press the [C] (clear) key in the keypad, and then specify the correct number of - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 48
settings are available. Setting Auto Color Full Color 2 Color C451 Description Select this setting to automatically detect whether the scanned document is in color or in black and white, then select the appropriate Color setting ("Full Color" or "Black"). Select this setting to print the copy - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 49
Black Description Select this setting to print the copy in black and white, regardless of whether the scanned document is in color or in black and white. Follow the procedure described below to select the Color setting. 1 In the Basic screen, touch [Color]. The Color screen appears. 2-6 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 50
Using copy functions Chapter 2 Using copy functions 2 2 Select the desired Color setting. - To return to the main screen, touch [Main Screen]. - If the "2 Color" setting was selected, touch the button for the desired color, and then touch [OK]. 3 Touch [OK]. The Basic screen appears again. - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 51
paper size can be selected automatically according to the document size or it can be specified manually. Specify the paper size according to the corresponding procedure, depending on the desired copy settings " setting, the Zoom screen appears. Touch the button for the desired zoom ratio. 2-8 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 52
will be slow, even with single-sided copying, since the paper alignment operation is performed. 1 In the Basic screen, touch [Paper]. The Paper screen appears. C451 2-9 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 53
2 2 Touch [Auto]. Using copy functions Using copy functions Chapter 2 - To return to the main screen, touch [Main Screen]. 3 Touch [OK]. The Basic screen appears again. 2-10 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 54
The paper tray loaded with paper of the desired size can be selected manually. By also selecting the Auto Zoom setting, the most appropriate zoom ratio is . For details on loading paper, refer to the User's Guide [Copy Operations]. 1 In the Basic screen, touch [Paper]. The Paper screen appears - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 55
2 Using copy functions 2 Select the paper tray loaded with paper of the desired size. Using copy functions Chapter 2 - To return to the main screen, touch [Main Screen]. 3 Touch [OK]. The Basic screen appears again. 2-12 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 56
a copy on paper with a size different than the document or to enlarge or reduce the size of the copy image. The zoom ratio can be specified in any of the following ways. Setting Auto Zoom*1 Full Size Enlarge Reduce*2 . Programmed zoom ratios can be recalled to be used again for copying. C451 2-13 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 57
Minimal" can be selected. Touch [Minimal] to produce a copy with the original image slightly reduced (93.0%) and centered in the paper. The zoom ratio of the to the User's Guide [Copy Operations]. *3 The programmed zoom ratios can be changed. For details, refer to the User's Guide [Copy Operations]. - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 58
then touch [OK]. - Touch [+] to enlarge the zoom ratio, and touch [-] to reduce the zoom ratio in 0.1% increments. 3 Touch [OK]. The Basic screen appears again. C451 2-15 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 59
selected, select the position of the binding margin and the orientation of the loaded document, otherwise the copies will not be printed as desired. 2-16 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 60
to select document and copy settings. Selecting single-sided or double-sided copies 1 In the Basic screen, touch [Duplex/Combine]. The Duplex/Combine screen appears. C451 2-17 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 61
Using copy functions Chapter 2 2 2 Touch [Original > Copy]. Using copy functions - To return to the main screen, touch [Main Screen]. The Duplex Settings screen appears. 3 Touch the button for the desired settings, and then touch [OK]. 2-18 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 62
than 11-11/16 inch (297 mm), a binding position along the short side of the paper is selected. 4 Touch [Close]. The Basic screen appears again. C451 2-19 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 63
2 Using copy functions 2.6 Selecting a combined copy setting Two document images can be combined and printed on a single page, reducing paper use. 1 In the Basic screen, touch [ . 2 Touch [Combine]. - To return to the main screen, touch [Main Screen]. The Combine screen appears. 2-20 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 64
Using copy functions Chapter 2 Using copy functions 2 3 Touch [2in1], and then touch [OK]. 4 Touch [Close]. The Basic screen appears again. C451 2-21 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 65
to separate it when a finisher is installed. Select one of these settings to bind the printed copies with staples. "Corner" or "2 Positions" can be selected. Select one of these settings to punch holes in the copies for filing this setting to fold copies in three before feeding them out. 2-22 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 66
a Staple setting is selected. *3 The Staple settings are available only if the optional finisher is installed. *4 The Punch settings are available only if punch kit PK-512 is installed on optional finisher FS-608 or finisher FS-517 or if punch kit PK-515 is installed on finisher FS-519. C451 2-23 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 67
copy functions *5 The number of punched holes differ depending on the country (region) where the unit is installed. For details, consult your technical representative. *6 The Half-Fold, Center Staple & Fold and Tri-Fold settings are available only if optional finisher FS-608 is installed. *7 The - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 68
Using copy functions Chapter 2 Using copy functions 2 2 Select the desired Finishing settings. - To return to the main screen, touch [Main Screen]. 3 Touch [OK]. The Basic screen appears again. Selecting Staple/Punch settings 1 In the Basic screen, touch [Finishing]. C451 2-25 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 69
Using copy functions Chapter 2 2 2 Touch [Staple/Punch]. Using copy functions - To return to the main screen, touch [Main Screen]. The Staple/Punch screen appears. 3 Touch the button for the desired settings, and then touch [Position Setting]. 2-26 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 70
the stapling or hole-punching position according to the orientation of the loaded document. The paper is stapled or holes are punched along the long 2 Note The number of punched holes differs depending on the country (region) where the unit is installed. For details, consult your - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 71
Using copy functions Chapter 2 2 Using copy functions Selecting a folding or binding setting 1 In the Basic screen, touch [Finishing]. 2 Touch [Fold/Bind] or [Center Staple/Fold]. When finisher FS-608 is installed 2-28 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 72
Chapter 2 Using copy functions 2 When the saddle stitcher is installed on finisher FS519 - To return to the main screen, touch [Main Screen]. A screen appears, allowing folding or binding settings to be specified. 3 Select the desired settings. When finisher FS-608 is installed C451 2-29 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 73
Using copy functions Chapter 2 2 Using copy functions When the saddle stitcher is installed on finisher FS519 - To cancel the setting, touch [No]. 4 Touch [OK], and then touch [OK] in the next screen that appears. Otherwise, touch [Main Screen]. The Basic screen appears again. 2-30 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 74
image Copies can be printed with the image not rotated to fit the orientation of the loaded paper. 2 Note Depending on the paper size and zoom ratio, some parts of the image may be lost. Follow the procedure described below to select the setting to not rotate the image. % Touch [ - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 75
lines or documents with a background color, such as maps. Select this setting when copying documents containing only text that appears faint (such as that written with a pencil). Select this setting when copying images (documents) printed with this machine. Select this setting when copying documents - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 76
setting for photos printed on photo paper. Select this setting for printed photos, such as in books or magazines. Follow the procedure described below to select an Original Type setting. 1 Position the page 1-17. 2 Touch the Original/Density tab. The Original/Density screen appears. C451 2-33 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 77
Using copy functions Chapter 2 2 3 Touch [Original Type]. Using copy functions The Original Type screen appears. 4 Touch the button for the quality setting most appropriate for the loaded document. 2-34 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 78
Using copy functions Chapter 2 Using copy functions 2 - If "Text/Photo" or "Photo" is selected, select the photo type, and then touch [OK]. - To return to the main screen, touch [Main Screen]. 5 Touch [OK]. The Original/Density screen appears again. C451 2-35 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 79
Chapter 2 2 Using copy functions 2.10 Selecting the density settings The copy density and the background density can be adjusted according to the original. The following density adjustments are available. Parameter Density Background Removal Description The print image density can be adjusted - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 80
the desired Density setting. - Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. - To select the center setting (default setting), touch [Standard]. - To return to the main screen, touch [Main Screen - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 81
Using copy functions Chapter 2 2 Using copy functions 4 Touch [OK]. The Original/Density screen appears again. Adjusting the background density (Background Removal settings) 1 Touch the Original/Density tab. The Original/Density screen appears. 2 Touch [Background Removal]. 2-38 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 82
time [Light] or [Dark] is touched, the density is lightened or darkened by one level. - To select the third setting from the right (default setting), touch [Standard]. - Touch [Auto] to automatically adjust the level of the background density according to the document being printed. - To return to - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 83
types of paper that can be loaded in a paper tray. For details on the types of paper that can be loaded, refer to the User's Guide [Copy Operations]. 2 Reminder If special paper is loaded into a paper tray, be sure to select the corresponding paper type for that tray, otherwise a paper misfeed - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 84
Using copy functions Chapter 2 Using copy functions 2 1 In the Basic screen, touch [Paper]. The Paper screen appears. C451 2-41 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 85
"Auto" Paper setting. However, if the "Single Side Only" setting is selected for the paper tray, that tray is given priority with singlesided printing. 2-42 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 86
the appropriate setting for the type of special paper that is loaded. Touch the button for the desired paper type. - To print on letterheads, colored paper or envelopes, touch [↓] or [↑]. 5 Touch [OK], and then touch [OK] in the next two screens that appear. Otherwise, touch [Main Screen - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 87
Chapter 2 2 Using copy functions The Basic screen appears again. Printing double-sided copies manually The "Duplex 2nd Side" setting is used to print doublesided copies on paper that cannot be fed through the automatic duplex unit. The paper to be used for printing the duplex second side can be - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 88
Using copy functions 2 2 Touch the button for the bypass tray, and then touch [Change Settings]. Using copy functions Chapter 2 - To return to the main screen, touch [Main Screen]. C451 2-45 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 89
Using copy functions Chapter 2 2 3 Touch [Paper Type]. Using copy functions 4 Select the type of paper to be loaded and touch [Duplex 2nd Side]. 5 Touch [OK], and then touch [OK] in the next two screens that appear. Otherwise, touch [Main Screen]. The Basic screen appears again. 2-46 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 90
for the tray 1, tray 2 and bypass tray. 2 Note For details on loading paper, refer to the User's Guide [Copy Operations]. The paper size can be selected for the bypass tray in any of the following ways. Setting Auto that the paper tray is used specifically with the selected paper size. C451 2-47 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 91
before entering Enlarge Display mode. For details, refer to the User's Guide [Copy Operations]. *4 By specifying paper one size larger than the document copied at the center so that there is no loss of the document image. The following procedure describes how to specify the size of the paper loaded - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 92
Using copy functions 2 2 Touch the button for the bypass tray, and then touch [Change Settings]. Using copy functions Chapter 2 - To return to the main screen, touch [Main Screen]. - To set the paper size for tray 1 or 2, touch the button for the corresponding paper tray. C451 2-49 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 93
Using copy functions Chapter 2 2 3 Touch [Paper Size]. Using copy functions 4 Touch either [Auto Detect] or select the desired paper size. 2-50 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 94
copy functions Chapter 2 5 Touch [OK], and then touch [OK] in the next two screens that appear. Otherwise, touch [Main Screen]. The Basic screen appears again. C451 2-51 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 95
being printed so that it can be printed once the current copy job is finished. ! Detail Up to 61 copy jobs, including the current copy job, can queued. A copy job can be reserved after scanning of the loaded document is finished. The next job cannot be reserved while a document is being scanned. 1 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 96
Basic screen. - For details on positioning the document, refer to "Feeding the document" on page 1-17. 2 Press the [Start] key. 3 After the current job is finished, the next copy job begins. C451 2-53 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 97
scanned or a job is being printed. - Scanning/printing temporarily stops. - If a document is being scanned for a job, pressing the [Stop] key temporarily stops scanning. 2-54 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 98
delete a temporarily stopped job, select the job that you wish to delete, and then touch [Delete]. - Select only one job at a time to be deleted. C451 2-55 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 99
of copies, a single proof copy can first be printed so that it can be checked. This prevents copy errors from occurring. 2 Note When printing a proof copy, specify multiple copies. This feature cannot be used if "Feeding the document" on page 1-17. 2 Select the desired copy settings. 2-56 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 100
the [Proof Copy] key. - If the document was loaded on the original glass, touch [Finish], and then press the [Start] key. A single proof copy is printed. 4 Check the proof copy. - To change the copy settings, press the [C] (clear) key or the [Reset] key, and then change the settings. C451 2-57 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 101
Using copy functions Chapter 2 2 5 Touch [Print]. Using copy functions The remaining copies are queued as a copy job. 2-58 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 102
3 Using fax/ scan functions Using fax/scan functions Chapter 3 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 103
and register destinations before entering Enlarge Display mode. For details, refer to the User's Guide [Network Scanner Operations], the User's Guide [Fax Operations] and the User's Guide [Network Fax Operations]. For details on specifying settings and setting up the environment for using the - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 104
page 1-17. 3 Specify the destination. Using fax/scan functions Chapter 3 - For details on clear) key. 4 Specify the necessary scanning settings. - For details on specifying scanning settings, refer to page 3-22. - To cancel the setting and select the default, press the [Reset] key. C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 105
Press the [Start] key. Using fax/scan functions - If the machine is set to display the transmission result report screen, a screen appears, requesting confirmation to print the transmission result report. the scan operation. Scanning of the document begins, and then the fax is sent. 3-4 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 106
Using fax/scan functions 3 ! Detail If the "Destination Check Display Function" parameter was set to "ON", the Destination Settings screen transmission result report, the transmission result report is printed if the transmission could not be completed. Using fax/scan functions Chapter 3 C451 3-5 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 107
User's Guide [Fax Operations] and the User's Guide [Network Fax Operations]. The scan data can be sent in any of the following ways. Scan operations Method Scan to E-mail Scan to FTP Scan to SMB Description The Scan to E-Mail operation is used to send scan data to a specified E-mail address as - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 108
. Faxes can be sent on an IP network. This operation can be performed only between our compatible models. Scan data can be sent to the IP address or host name specified for the destination. This operation can only be used through an intranet. Color faxes cannot be sent or received. C451 3-7 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 109
faxes manually, touch [Off-Hook]. When this button is touched, the dial tone can be heard from the speaker. For more details, refer to the User's Guide [Fax Operations]. This feature is not available with Internet faxing or IP faxing. Also, if "Confirm Address (TX)" is specified in the administrator - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 110
Using fax/scan functions Chapter 3 Using fax/scan functions 3 1 In the Address Book screen, touch [Other Dest.]. The Other Destinations screen appears. 2 Touch the button for the desired destination type. C451 3-9 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 111
]. To select all destinations registered with the selected group, touch [Select All] in the Group Details screen. To cancel all of the selected destinations, touch [Reset]. - To return to the Address Book screen, touch [Main Screen]. 3-10 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 112
Using fax/scan functions 3 3 Touch the button for the desired destination, and then touch [OK]. - To cancel a selection, touch the button for a selected destination again. 4 Touch [Close]. Using fax/scan functions Chapter 3 C451 3-11 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 113
or IP address faxing. If "Confirm Address (TX)" is specified in the administrator settings, Job History tab cannot be used. For details on the settings of "Confirm Address (TX)", refer to the User's Guide [Fax Operations]. 1 Touch the Job History tab. The Job History list appears. 3-12 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 114
for an E-mail address registered with the LDAP server and select the destination. ! Detail In order to perform an LDAP search, LDAP must be enabled and an LDAP server must be registered. For details on specifying LDAP settings, refer to the User's Guide [Network Scanner Operations]. C451 3-13 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 115
]. If user authentication is applied, whether or not to accept "Manual Destination Input" is specified for each registered user. For details on the user registration, refer to the User's Guide [Copy Operations]. 1 Touch the Address Search tab. Using fax/scan functions Chapter 3 3-14 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 116
fax/scan functions 3 - If multiple LDAP servers are specified, select the server to be searched, and then touch [OK]. 2 Select the search method. - To specify a search word, touch [Search]. To specify multiple search conditions, touch [Advanced Search]. - When there is only one LDAP server C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 117
Using fax/scan functions Chapter 3 3 Using fax/scan functions - When there are multiple LDAP servers - Authentication may be necessary, depending on the LDAP server that is specified. 3 Specify the search conditions, and then touch [Start Search]. For a simple search 3-16 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 118
Using fax/scan functions Chapter 3 Using fax/scan functions 3 For an advanced search The search results are displayed. 4 Touch the button for the desired destination, and then touch [OK]. - To cancel a selection, touch the button for a selected destination again. C451 3-17 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 119
for an address book destination during a fax transmission. 2 Note If "Manual Destination Input" in Administrator mode is set to "Restrict", a fax number cannot be entered. For details on specifying the setting for the "Manual Destination Input" parameter, refer to the User's Guide [Fax Operations - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 120
fax number. Using fax/scan functions Chapter 3 - Otherwise, touch [Enter Registered No.], use the keypad to type in destination registration number, and then touch [Apply]. - To specify an additional recipient, touch [Next Destination], and then enter the number. - To return to the Address Book - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 121
button to send a push-button tone. This is used when a fax information service is being used. "T" appears in the screen. If pulse dialing is connection is enabled, touch [Pause] after the outside line access code (for example, "0") for reliable dialing when transmitting from an inside . 3-20 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 122
Using fax/scan functions 3 2 Note If "Confirm Address (TX)" is specified to enter fax number directly, a screen appears prompting you to enter the fax number again. Using fax/scan functions Chapter 3 C451 3-21 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 123
3.3 Specifying scanning settings (Scan Settings) Touch [Scan Settings] in the Fax/Scan mode screen, and then specify the document scanning settings. Simplex/Duplex Select the appropriate ADF scan a document where the first page is single-sided and the remaining pages are double-sided. 3-22 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 124
Using fax/scan functions 3 1 Touch [Scan Settings] in the Fax/Scan mode screen. Using fax/scan functions Chapter 3 The Scan Settings screen appears. 2 Touch [Simplex/Duplex]. - To return to the Address Book screen, touch [Main Screen]. The Simplex/Duplex screen appears. C451 3-23 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 125
scan functions 3 Select the scanning method. Using fax/scan functions Chapter 3 4 Touch [OK], and then touch [OK] in the next the photo will not be reproduced and the entire photo will appear black. Select this setting when scanning documents with faint text (such as that written in pencil). 3- - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 126
Using fax/scan functions Chapter 3 Using fax/scan functions 3 Setting Copied Paper Text/Photo Photo Description Select this setting when scanning copied documents. this setting for photos printed on photo paper. Select this setting for printed photos, such as in books or magazines. C451 3-25 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 127
3 Using fax/scan functions 1 Touch [Scan Settings] in the Fax/Scan mode screen. Using fax/scan functions Chapter 3 The Scan Settings screen appears. 2 Touch [Original Type]. - To return to the Address Book screen, touch [Main Screen]. The Original Type screen appears. 3-26 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 128
the quality setting most appropriate for the loaded document. - If "Text/Photo" or "Photo" is selected, select the photo type, and then touch [OK]. Using fax/scan functions Chapter 3 4 Touch [OK], and then touch [OK] in the next screen that appears. Otherwise, touch [Main Screen - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 129
/scan functions Chapter 3 3 Using fax/scan functions Resolution Select the detailedness for scanning documents. The following Resolution settings are scanning documents with particularly fine print or with detailed illustrations. 1 Touch [Scan Settings] in the Fax/Scan mode screen. 3-28 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 130
2 Touch [Resolution]. Using fax/scan functions Chapter 3 - To return to the Address Book screen, touch [Main Screen]. The Resolution screen appears. 3 Select the resolution. - A more finely scanned document has more information to be sent, therefore, the transmission time increases. C451 3-29 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 131
× 300 dpi" can be selected; however, the setting will change to "200 × 200" when the fax is sent. 4 Touch [OK], and then touch [OK] in the next screen that appears. Otherwise, touch density can be adjusted to one of nine levels. 1 Touch [Scan Settings] in the Fax/Scan mode screen. 3-30 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 132
appears. 2 Touch [Density]. Using fax/scan functions Chapter 3 - To return to the Address Book screen, touch [Main Screen]. The Density screen appears. 3 Select the desired Density setting. - Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. C451 3-31 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 133
Using fax/scan functions - To select the center setting (default setting XPS format. Select this setting to save the data in a highly compressed XPS format. Some format settings for the file to be saved may not be available, depending on the selected Color setting and fax destination. 3-32 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 134
Using fax/scan functions Chapter 3 Using fax/scan functions 3 2 Note For fax transmissions and Internet fax transmissions, the file type is fixed to the TIFF format. 1 Touch [Scan Settings] in the Fax/Scan mode screen. The Scan Settings screen appears. 2 Touch [File Type]. C451 3-33 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 135
Address Book screen, touch [Main Screen]. The File Type screen appears. 3 Select the file format and the page setting. Using fax/scan functions Chapter 3 - If "Single Page" is selected under "Scan Setting", a file is created in a format where the data for each page can be saved when downloading - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 136
setting for documents with distinct black and white areas, such as in line drawings. Some Color settings may not be available, depending on the selected File Type setting. 2 Note For fax transmissions and Internet fax transmissions, the color is fixed to 2 color of black and white. C451 3-35 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 137
3 Using fax/scan functions 1 Touch [Scan Settings] in the Fax/Scan mode screen. Using fax/scan functions Chapter 3 The Scan Settings screen appears. 2 Touch [Image Adjust]. - To return to the Address Book screen, touch [Main Screen]. The Image Adjust screen appears. 3-36 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 138
screen that appears. Otherwise, touch [Main Screen]. Background Removal (Image Adjust) The scanning density of the document background can be adjusted. When documents printed on colored paper are scanned in color, the background may become black. In that case, the density of the background can be - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 139
3 Using fax/scan functions 1 Touch [Scan Settings] in the Fax/Scan mode screen. Using fax/scan functions Chapter 3 The Scan Settings screen appears. 2 Touch [Image Adjust]. - To return to the Address Book screen, touch [Main Screen]. The Image Adjust screen appears. 3-38 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 140
Removal]. Using fax/scan functions Chapter 3 The Background Removal screen appears. 4 Adjust the density as desired. - Each time [Light] or [Dark] is touched, the density is lightened or darkened by one level. - To select the third setting from the right (default setting), touch [Standard - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 141
/scan functions Chapter 3 3 Using fax/scan functions 5 Touch [OK], and then touch [OK] in the next two screens that appear. Otherwise, touch [Main a preset paper size and orientation in a size other than metric or inch sizes. 1 Touch [Scan Settings] in the Fax/Scan mode screen. 3-40 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 142
[Scan Size]. Using fax/scan functions Chapter 3 - To return to the Address Book screen, touch [Main Screen]. The Scan Size screen appears. 3 Select the desired size and orientation. - If a button other than [Auto] was touched, select the desired paper size, and then touch [OK]. C451 3-41 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 143
functions Chapter 3 3 Using fax/scan functions 4 Touch [OK], and then touch [OK] Direction settings)" on page 1-28. Select the binding position, for example, when holes are punched in the document or the document is stapled. In addition, specify the binding 11-11/16 inch (297 mm). 3-42 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 144
Using fax/scan functions Chapter 3 Using fax/scan functions 3 These functions can be used together. 2 Note [Original Direction] is not available with fax function. 1 Touch [Scan Settings] in the Fax/Scan mode screen. The Scan Settings screen appears. 2 Touch [Original Settings]. C451 3-43 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 145
functions Chapter 3 3 Using fax/scan functions - To return to the Address Book screen, touch [Main Screen]. The Original Settings screen appears. 3 Select the document settings. - Touching [Original Direction] displays the Original Direction screen. Touch the button for - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 146
3 Using fax/scan functions 3 - Touching [Binding Position] displays the Binding Position screen. Touch the button for the desired document binding position, and then touch [OK]. 4 Touch [Close], and then touch [OK] in the next screen that appears. Otherwise, touch [Main Screen]. C451 3-45 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 147
/scan functions Chapter 3 3 Using fax/scan functions 3.4 Using a program "Program" refers to the programs, refer to the User's Guide [Network Scanner Operations], the User's Guide [Fax Operations] and the User's Guide [Network Fax Operations]. 1 With the Fax/Scan mode screen displayed, press - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 148
functions 3 2 Touch the button for the desired program. Using fax/scan functions Chapter 3 - Touch [Page List] to select the page of programs to be displayed. - Touch [← specify multiple destinations, add a destination. For details, refer to "Specifying a destination" on page 3-6. C451 3-47 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 149
Checking the destinations The specified destinations can be checked. In addition, destinations can be removed or their information can be checked. 1 In the Fax/Scan mode screen, touch [Dest. Settings]. The Destination Settings screen appears, and the specified destinations can be checked. 3-48 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 150
Using fax/scan functions Chapter 3 Using fax/scan functions 3 2 Select the desired destination from the list of destinations. - To return to the Address Book screen, touch [Main Screen]. 3 Touch [Details], and then check the destination details. C451 3-49 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 151
Using fax/scan functions Chapter 3 3 Using fax/scan functions - To delete a destination, select a destination, and then touch [Delete] to display a message requesting confirmation to delete the destination. 4 Touch [Close]. 3-50 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 152
4 Logging on and logging off Logging on and logging off Chapter 4 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 153
the User's Guide [Copy Operations]. When the screen to enter the user name appears If the message "Enter User Name and password, and then password. When the following screen appears, type in the user name and password. For a user name and password, contact the machine's administrator. 4-2 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 154
unit (biometric type) to display the Basic screen. For details on performing authentication using the authentication unit (biometric type) and registering information, refer to the User's Guide [Copy Operations] or the manual included with the authentication unit (biometric type). C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 155
Guide [Copy Operations] or the manual included with the authentication unit (IC card type). - If [User Name List] appears, the desired user name can be selected from the list. Touch [User Name List ", users with no access to a user name and password can touch [Public User Access] to use this machine - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 156
text, touch [←] and [→] to move the cursor to the character to be changed, touch [Delete], and then type in the desired letter or number. - To clear all entered text, press the [C] (clear) key. - To revert to the previously entered text, touch [Undo - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 157
]. Logging on and logging off 4 Using the control panel keypad or the keyboard that appears in the touch panel, type in the password, and then touch [OK]. - To return to the main screen without changing the settings, touch [Cancel]. 5 Touch [Login] or press the [Access] key. Logging on - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 158
Administrator mode has been set to "Synchronize", the account track screen does not appear if the users and accounts are synchronized. The Basic screen appears. 6 When you are finished performing the desired operations, press the [Access] key. A message appears, requesting confirmation - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 159
name and password. For an account name and password, contact the machine's administrator. ! Detail If "Account Track Input Method" in Administrator mode was set to "Password Only", log on is possible by only entering the password. For details, refer to the User's Guide [Copy Operations]. 4-8 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 160
Logging on and logging off 4 1 Touch [Account Name]. - The screen that appears differs depending on the Authentication method settings in the Administrator Settings. 2 Using the control panel keypad or the keyboard that appears in the touch panel, type in the account name, and then touch [OK - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 161
text, touch [Undo]. 3 Touch [Password]. Logging on and logging off Chapter 4 4 Using the control panel keypad or the keyboard that appears in the touch panel, type in the password, and then touch [OK]. - To return to the main screen without changing the settings, touch [Cancel]. 4-10 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 162
logging off 4 5 Touch [Login] or press the [Access] key. Logging on and logging off Chapter 4 The Basic screen appears. 6 When you are finished performing the desired operations, press the [Access] key. A message appears, requesting confirmation to log off. 7 Touch [Yes], and then touch [OK - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 163
4 Logging on and logging off - The original screen appears again. The screen that appears differs depending on the Administrator mode settings that have been specified. Logging on and logging off Chapter 4 4-12 C451 - Konica Minolta bizhub C451 | bizhub C451 Enlarge Display Operations User Guide - Page 164
http://konicaminolta.com A00K-9641-33 2007 Copyright Printed in China 2007.11
User’s Guide
[Enlarge Display Operations]