Konica Minolta bizhub PRESS C8000 IC-601 Color Centro User Guide
Konica Minolta bizhub PRESS C8000 Manual
View all Konica Minolta bizhub PRESS C8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub PRESS C8000 manual content summary:
- Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 1
IC-601 Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 2
Contents 1 Introduction 1.1 1.1.1 1.1.2 1.2 1.2.1 1.2.2 Welcome ...1-2 Composition of User's Guide...1-2 User's Guide ...1-2 Conventions used in this manual 1-3 Symbols used in this manual ...1-3 Original and paper indications ...1-4 2 Overview of the Color Centro 2.1 2.1.1 2.2 2.3 2.3.1 2.3.2 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 3
] screen 9-6 Load the Spot Color Table...9-7 Create the New Spot Color Table 9-8 Select the Spot Color / Add the New Spot Color 9-9 Adjust the Spot Color Manually 9-10 IC-601 Contents-2 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 4
9.6 Adjustment of Spot Color with the Printed Chart 9-11 9.7 Save the Spot Color Table...9-13 9.8 Change the Priority of the Spot Color Table 9-14 9.9 Spot Color Table Management...9-15 9.10 Spot Color Table Management...9-19 9.11 Initialize the Spot Color Screen 9-21 10 Alternative - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 5
Color Default Settings] screen 12-5 Basic operation of [Color Default Settings] screen 12-5 Confirm the name of Default Color Configuration 12-6 Default Manual Settings ...12-7 Set the Default Settings of the RGB-CMYK Conversion 12-7 Set the Default Settings of the CMYK-CMYK Conversion 12-7 Set - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 6
12.4 Set Color Verification...12-9 12.5 Return to Factory Default...12-10 12.6 Color Default Settings ...12-11 13 Color Configuration Management 13.1 13.1.1 13.1.2 13.1.3 13.1.4 13.2 13.2.1 13.2.2 13.2.3 13.2.4 13.2.5 13.3 13.4 13.4.1 13.4.2 13.4.3 13.4.4 13.4.5 13.5 13.5.1 13.5.2 13.5.3 13 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 7
14-5 Suspend the Operation...14-5 Restart the Suspended Operation 14-6 Vivid Mode for bizhub PRESS C70hc 14-7 Preparation of Vivid Mode ...14-7 RGB Vivid Mode...14-7 CMYK Vivid Mode...14-7 15 Troubleshooting 15.1 Cannot start Color Centro...15-2 15.2 Cannot Adjust Color ...15-3 16 Appendix - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 8
1 Introduction - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 9
Guide describes the functions, operating instructions, precautions for correct operation, and simple troubleshooting troubleshooting operations. Limit your maintenance and troubleshooting operations to the areas explained in this manual. Should you experience any problems, please contact our service - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 10
Symbols used in this manual Symbols are used in this manual to express various types of information. The following describes each symbol related to correct and safe usage of this machine. Safety Information 7 WARNING - This symbol indicates that a failure to heed the instructions may lead to death - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 11
1.2 Conventions used in this manual 1 d Reference This symbol indicates a reference. View the reference as required. Key symbols [ ] Key names on the touch panel or computer screen, or a name of user's guide are indicated by these brackets. Bold text Key names, part names, product names and - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 12
2 Overview of the Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 13
controller. For details of the image controller, refer to "User's Guide - Printer (IC-601)". 2.1.1 Roles of Color Centro Color Centro is You can manually adjust the output density against the input density instructions for each color of CMYK. 3 Spot Color You can manually adjust hue of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 14
2.1 Color Centro 2 Image Controller Main Body RIP (Color Conversion) Color Adjustment (Density Control) Job Profile Management Spot Color Calibration Alternative Color Tone Curve Adjustment Image Processing, etc. Print Color Default Settings Color Configuration Management Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 15
2.2 Control Panel Layout 2 2.2 Control Panel Layout No. Item 1 Keypad 2 Reset 3 Power LED 4 Data LED 5 Interrupt 6 Stop 7 Proof Copy 8 Start 9 Start LED 10 C (Clear) 11 Access 12 Mode Check IC-601 Description Enters values for various settings, including print quantity - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 16
allow the function setting. 7 CAUTION Do not press hard or pointed objects against the touch panel on Service Call Screen is displayed and copying cannot be continued any more. - Otherwise, an unexpected trouble machine trouble such as toner fixation. d Reference Refer to User's Guide (POD Administrator - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 17
or more 2.3.2 Interfaces used for connection To connect Color Centro to the image controller, use the Ethernet via a network connection. It supports 1000Base-T, 100Base-TX, and 10Base-T standards. Connection diagram The printer cables are connected to the Ethernet port of the image controller - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 18
instrument, install the driver of the measure- ment instrument. After installing, execute the measurement test and confirm that there is no problem on the connection. d Reference For details on the connectable interfaces, refer to page 2-6. For details on the network settings and confirmation - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 19
3 Precautions for Installation - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 20
instruction on the screen. 3.2.1 Operating environment of the installer Operating system CPU HDD Memory Display Windows 2000 Professional (Service Pack 4 or later) Windows XP Professional (Service administrator authority. - The installer supports installation in both IPv4/IPv6 environments of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 21
machine In [TCP/IP Settings] of this machine, specify the IP address. d Reference For details on TCP/IP Settings of this machine, refer to [User's Guide - POD Administrator's Reference]. IC-601 3-3 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 22
4 Installation of Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 23
4.1 Introduction 4 4 4.1 4.2 Installation of Color Centro This chapter describes the procedure for installing Color Centro using the installer. Introduction Before installing Color Centro, confirm the description of page 3-2. Installing Color Centro 1 Insert the installation CD-ROM into the CD- - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 24
the license agreement as re- quired. 5 Select the destination folder and click [Next]. % By default, Color Centro is installed to C:\Program Files\KONICA MINOLTA\Color Centro. % If you want to change the destination folder, click [Change] and select the desired location on the displayed screen and - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 25
4.2 Installing Color Centro 4 6 Click [Install]. 7 Click [Finish]. The installation is complete. % The short cut icon appears on the desktop. % Readme for Color Centro is installed as well as Color Centro in the selected installation location. IC-601 4-4 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 26
5 Basic Information - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 27
, and click [Allow access] to allow the communication by Java application on your network. 1 Select [Start] ->[All Programs] -> [KONICA MINOLTA] -> [Color Centro] -> [KONICA MINOLTA Color Centro]. % Or double-click the short cut key on the Desktop screen. [Login] screen and [Launcher] screen appears - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 28
5.1 Launch Color Centro 5 % You can select the IP address and the port number which were used before, from [Current Destination]. The input number is kept even after exiting Color Centro. % When you have connected to the image controller already, the IP address and the port number of the image - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 29
5.2 Screens of Color Centro 5 5.2 Screens of Color Centro This section describes the screens of Color Centro. 5.2.1 [Launcher] screen This section describes [Launcher] screen which appears after launching Color Centro. [Launcher] screen is the top screen which displays the screen to use the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 30
5.2 Screens of Color Centro Menu [Edit] [Help] 5 Menu Items [Calibration] [Tone Curve Adjustment] [Spot Color] [Alternative Color] [Color Default Settings] [Color Configuration Management] [Profile Management] [Help] [Version] Description Displays [Calibration] screen to execute the calibration. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 31
5.2 Screens of Color Centro 5 [Calibration] screen Using this screen, you can execute the calibration of the image controller. For how to operate it, refer to page 7-2. [Tone Curve Adjustment] screen Using this screen, you can adjust the tone curve processing of the image controller. For how to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 32
5.2 Screens of Color Centro 5 [Spot Color] screen Using this screen, you can adjust the spot color table and spot color of the image controller. For how to operate it, refer to page 9-2. [Alternative Color Management] screen Using this screen, you can adjust the alternative color table of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 33
5.2 Screens of Color Centro 5 [Profile Management] screen Using this screen, you can manage the color profiles. For how to operate it, refer to page 11-2. [Color Default Settings] screen Using this screen, you can set the color default settings used by the image controller. For how to operate it, - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 34
5.2 Screens of Color Centro 5 [Color Configuration Management] screen Using this screen, you can manage the combination of profiles of several types as the Profile Set used by the image controller, and you can manage the color settings used by the image controller as the Color Configuration. For - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 35
5.3 Exit from Color Centro 5 5.3 Exit from Color Centro This section describes how to exit from Color Centro. The procedures to exit from Color Centro are as follows; % On [Launcher] screen, select [File] menu - [Exit]. Color Centro is terminated. % Similar operation can be done when you click - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 36
6 How to Use Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 37
6.1 Color Setting of the Main Body 6 6 How to Use Color Centro 6.1 Color Setting of the Main Body For proper use of Color Centro, this section describes the color settings of the main body. The color printing of the main body is processed according to the adjustment which is executed by both of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 38
of the main body. One is the automatic calibration by the internal sensor of the RU option of the main body. The other is the manual calibration using Color Centro and the instrument. When you print the job in which the color accuracy is important, or you change the paper type - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 39
6.3 Adjustment for individual Hues 6 6.3 Adjustment for individual Hues Color Centro can execute not only the color settings for the entire system, but also adjustment for individual hues. Color Centro allows you to execute the following adjustments; - The Tone Curve Adjustment: You can adjust - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 40
6.4 Color Setting Workflows by Color Centro 6 6.4 Color Setting Workflows by Color Centro This section describes color setting workflows by Color Centro. To consistently maintain proper color output, we recommend to execute any of the following workflows or combination of those for daily - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 41
6.4 Color Setting Workflows by Color Centro 6 6.4.2 Color Settings by using the Color Configuration Management Function The procedure of a recommended workflow, which makes use of functions of Color Centro efficiently, is below: This workflow needs the measurement instrument. 1 Execute the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 42
7 Calibration - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 43
of the RU option of the main body for calibration. When you check this, make settings on the main body beforehand. For manual calibration, remove the check mark. Select [Scan Calibration], [i1Pro], [i1iSis No Filter], [i1iSis (UV Filter)], or [Spectrolino]. Executes chart printing. Executes a chart - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 44
7.1 Outline of Calibration 7 Item [Display Mode] - [Registered] [Display Mode] - [C], [M], [Y], [K] (curve view area) (measurement result list) [Register] [Help] Status bar Description When [Registered] is checked, the registered curve in the image controller is displayed on curve view area. When - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 45
7.1 Outline of Calibration 7 7.1.3 Basic operation of [Calibration] screen This section describes basic operation of [Calibration] screen. 1 Select the calibration method. % For detailed information on how to select the calibration method, refer topage 7-5. 2 Select the instrument. % For detailed - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 46
of the main body. One is the automatic calibration by the internal sensor of the RU option of the main body. The other is the manual calibration using Color Centro and the instrument. When you print the job in which the color accuracy is important, or you change the paper type - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 47
7.3 Select the Instrument 7 7.3 Select the Instrument This section describes how to select the instrument for measurement. 0 To use the instrument, you need to install the device driver of the instrument to your computer. 1 From [Calibration] screen - [1. Instrument], select [Scan Calibration], [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 48
7.4 Print the Chart 7 7.4 Print the Chart To execute calibration with the instrument, the chart (a measurement patch chart) corresponding to the selected instrument is necessary. This section describes how to print the chart. 1 Click [2. Chart Output] - [Output]. [Print Chart] screen appears. 2 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 49
For detailed information on how to operate, refer to user's guide of each instrument. 0 You cannot change the instrument while area. % According to the selected instrument, the operation screen appears. Follow the instructions on the pages that follow. % If you measure a wrong line, a warning - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 50
. For detailed information on how to operate, refer to user's guide of each instrument. 0 You cannot change the instrument while measuring. According to the selected instrument, the operation screen appears. Then, follow the instruction of the screen. % To stop the measurement, click [Stop]. % After - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 51
7.7 Confirm Measurement Result 7 7.7 Confirm Measurement Result All measurement results appear in the list of [Calibration] screen. The list displays all measurement results, until the time when [Calibration] screen is closed or reset. This section describes how to confirm the measurement result. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 52
7.7 Confirm Measurement Result 7 To Confirm Registered Curve % Check [Display Mode] - [Registered] when you want to view the registered curve in the image controller. The registered curve in the image controller is displayed on the curve view area. % When both of [Measurement Result] and [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 53
7.8 Register the Calibration Data 7 7.8 Register the Calibration Data The image controller can save one calibration data. The calibration data acquired by measurement can be adopted to the output by registration in the image controller. This section describes how to register the calibration data. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 54
7.9 Reset the Calibration Data 7 7.9 Reset the Calibration Data The list displayed on the [Calibration] screen remains, until the time when [Calibration] screen is closed or reset. This section describes how to reset [Calibration] screen and clear the list of measurement result. 1 From the [File] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 55
8 Tone Curve Adjustment - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 56
8.1 Outline of Tone Curve Adjustment 8 8 Tone Curve Adjustment 8.1 Outline of Tone Curve Adjustment The Tone Curve Adjustment is adjustment for output density curve of each color of CMYK. This function of Color Centro enables to adjust the brightness and the contrast for the entire image. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 57
8.1 Outline of Tone Curve Adjustment 8 Item and [>>] [CCW] [CW] [Scale Down] [Scale Up] (curve view area) (vertical axis box) (horizontal axis box) [Brightness/Contrast] tab [Brightness/Contrast] tab [Undo] [Adjust Each Color] tab [Adjust Each Color] tab [Undo] [Confirmation Print] [Save] [Help] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 58
8.1 Outline of Tone Curve Adjustment 8 8.1.2 Menu of [Tone Curve Adjustment] screen The menu items of the [Tone Curve Adjustment] screen are as follows; Menu [File] [View] [Help] Menu Items [Login] [New Tone Curve] [Tone Curve Management] [Select Sample] [Confirmation Print] [Close] [Previous - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 59
8.1 Outline of Tone Curve Adjustment 8 8.1.3 Basic operation of [Tone Curve Adjustment] screen This section describes basic operation of [Tone Curve Adjustment] screen. 1 Select the sample image to confirm the conditions where the tone curve is adopted. % For detailed information on how to select - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 60
8.2 Select Sample Image 8 8.2 Select Sample Image When you adopt the tone curve to the sample image, you can confirm the conditions of [Before Adjustment] and [After Adjustment]. You can select the image which was set at factory shipping, as the sample image. This section describes how to select - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 61
8.2 Select Sample Image 8 8.2.2 Menu of [Sample Picture] screen The menu items of the [Sample Picture] screen are as follows; Menu [File] [Help] Menu Items [Login] [Reload] [Cancel] [Help] [Version] Description When you connect another image controller, the [Login] screen appears. For how to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 62
8.3 Confirm Sample Image 8 8.3 Confirm Sample Image The sample image specified on [Sample Picture] is displayed on [Before Adjustment] and [After Adjustment] of [Tone Curve Adjustment]. The sample images are enlarged/shrinked automatically to display the whole image in the area of [Before - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 63
8.4 Load the Tone Curve 8 8.4 Load the Tone Curve In the image controller, there is the tone curve registered at factory shipping. You can also register the tone curve which you adjusted on [Tone Curve Adjustment] screen. Color Centro can load these tone curves and also make adjustment. The tone - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 64
8.4 Load the Tone Curve 8 List Items The list items of the measurement result list on the [Tone Curve Management] screen are as follows; Item [File Name] [Tone Curve Name] [Created Date/Time] [Update Date/Time] [Memo] Description Displays the saved file name of the tone curve when [Local], [My - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 65
8.4 Load the Tone Curve 8 8.4.3 Load the Tone Curve This section describes how to load the tone curve. The tone curve registered at factory shipping in the image controller cannot be adjusted and overwritten. When you want to adjust the tone curve registered at factory shipping, load the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 66
8.5 Create the New Tone Curve 8 8.5 Create the New Tone Curve This section describes how to create the new tone curve. 1 Select [File] menu - [New Tone Curve] on [Tone Curve Adjustment] screen. On the left of [Load Tone Curve], "New" appears. % The name of the new tone curve is set at saving. % - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 67
8.6 Adjust the Brightness/Contrast 8 8.6 Adjust the Brightness/Contrast You can adjust the tone curve using brightness/contrast adjustment, each color adjustment, and curve view on [Torn Curve Adjustment] screen. The result of adjustment is reflected to the preview area immediately. This section - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 68
8.6 Adjust the Brightness/Contrast 8 8.6.2 Brightness/Contrast Adjustment This section describes how to adjust with [Brightness/Contrast] tab. The brightness adjustment function is to adjust the tone curve by changing the middle point value of the brightness of the entire image. The brightness - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 69
8.7 Adjust the Each Color 8 8.7 Adjust the Each Color You can adjust the tone curve using brightness/contrast adjustment, each color adjustment, and curve view on [Torn Curve Adjustment] screen. The result of adjustment is reflected to the preview area immediately. This section describes how to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 70
8.7 Adjust the Each Color 8 8.7.2 Basic operation of [Adjust Each Color] tab This section describes how to adjust with [Adjust Each Color] tab. Select the Combination The selected combination, the view settings and the settings of adjustment target on [Adjust Each Color] tab define the range of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 71
cannot select the multiple points at the same time. - Similar operation can be done when you press up/down key on the keyboard in stead of dragging. - When you select the added point and you press [Delete] key on the keyboard, you can delete the se- lected point. However, you cannot delete - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 72
8.8 Confirmation Print 8 8.8 Confirmation Print This section describes how to execute confirmation print to confirm the result of tone curve adjustment. This function is available only when [Hold(Cont..)] is selected on the [Sample Picture] screen in [Select Sample]. (This function is not - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 73
8.9 Save the Tone Curve 8 8.9 Save the Tone Curve This section describes how to save the adjusted tone curve. When you register the settings to the image controller, the adjusted tone curve can be adopted to the output. When the tone curve is saved in [Local], [My Documents] or [Network], the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 74
8.10 Tone Curve Management 8 8.10 Tone Curve Management This section describes how to manage the saved tone curve. The management of the tone curve uses [Tone Curve Management] screen. For detailed information of [Tone Curve Management], refer topage 8-9. Copy the Tone Curve You can make a - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 75
8.10 Tone Curve Management 8 [Export] screen appears. % When you select the multiple tone curves, [Export] is not available. % When a folder other than [Controller] is selected on the tree view, [Export] is not available. % Similar operation can be done when you select [File] menu - [Export]. 4 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 76
8.10 Tone Curve Management 8 Delete the Tone Curve You can delete the tone curve. 1 From the tree view and the list of [Tone Curve Management] screen, select the tone curve to delete. % For detailed information on how to connect another controller, refer to page 14-2. % When you reload the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 77
8.11 Reset the Tone Curve 8 8.11 Reset the Tone Curve This section describes how to reset the adjustment result of [Tone Curve Adjustment] screen. 0 Reset is executed immediately. 1 Click [Undo] of [Brightness/Contrast] tab or [Adjust Each Color] tab on [Tone Curve Adjustment] screen. The current - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 78
9 Spot Color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 79
Color] screen is composed as follows; IC-601 Item [Table Name] [Table] [Color Name] [Rename] (spot color list) [New] [Delete] [Copy] [Manual Adjustment] - [C], [M], [Y], [K] Description The name of spot color table loaded using [Table] appears in the left box of the [Table]. On launching this - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 80
9.1 Outline of Spot Color 9 Item [Before Adjustment] [After Adjustment] [Test Print] [Adjustment by Printing the Chart] - [Step] [Print Chart] (chart view area) [No.] [Group] [OK] [Save] [Help] Status bar Description Displays the conditions of spot color before adjustment. Displays the conditions - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 81
spot color. % For detailed information on how to add the spot color, refer to page 9-9. 3 Execute adjustment manually. % For detailed information on how to adjust the spot color manually, refer to page 9-10. 4 Execute adjustment using the chart printed with spot color. % For detailed information on - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 82
9.2 Load the Spot Color Table 9 9.2 Load the Spot Color Table In the image controller, there is the spot color table registered at factory shipping. You can also register the spot color table which you adjusted on [Spot Color] screen. Use of the Spot Color Adjustment function of Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 83
9.2 Load the Spot Color Table 9 List Items The list items of the list on the [Spot Color Table Management] screen are as follows; Item [Table Name] [Created Date/Time] [Update Date/Time] [Memo] Description Displays the spot color table name. Displays the date/time when the new spot color table - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 84
9.2 Load the Spot Color Table 9 9.2.3 Load the Spot Color Table This section describes how to load the spot color table. The spot color table registered at factory shipping in the image controller cannot be adjusted and overwritten. When you want to adjust the spot color table registered at - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 85
9.3 Create the New Spot Color Table 9 9.3 Create the New Spot Color Table You can create the new spot color table and add the new spot color. This section describes how to create the new spot color table. To create the new spot color table, use [Spot Color] screen. 1 Select [File] menu - [Create - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 86
9.4 Select the Spot Color / Add the New Spot Color 9 9.4 Select the Spot Color / Add the New Spot Color This section describes how to select the spot color and how to add the new spot color. Select the Spot Color % Select the spot color to adjust from the list of [Spot Color]. On the left of [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 87
] - [C], [M], [Y] and [K] for the spot color selected from the list on [Spot Color] screen. According to the settings, the preview area of [Manual Adjustment] - [Before Adjustment] and [After Adjustment] are updated. % For each color, specify the value (from "0" to "100"). % When you input below - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 88
9.6 Adjustment of Spot Color with the Printed Chart 9 9.6 Adjustment of Spot Color with the Printed Chart You can execute fine adjustment of the spot color after CMYK adjustment using the printed chart. This section describes how to adjust with the printed chart. To print the chart, use [Spot - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 89
9.6 Adjustment of Spot Color with the Printed Chart 9 6 Specify the number of the color patch and group which you adopt the spot color to [No.] and [Group], and click [OK]. The preview chart changes its look with changed CMYK values with the specified variation step, and the specified color is - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 90
9.7 Save the Spot Color Table 9 9.7 Save the Spot Color Table This section describes how to save the adjusted spot color table. To save the spot color table, use [Spot Color] screen. When you save the spot color table to the image controller, the spot color table is registered into the image - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 91
9.8 Change the Priority of the Spot Color Table 9 9.8 Change the Priority of the Spot Color Table This section describes how to change the priority of the spot color table among the multiple spot color tables of the same name (group) which are registered in the image controller. To change the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 92
9.9 Spot Color Table Management 9 9.9 Spot Color Table Management This section describes how to manage the saved spot color table. The management of the spot color table uses [Spot Color Table Management] screen. For detailed information of [Spot Color Table Management], refer topage 9-2. Copy - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 93
9.9 Spot Color Table Management 9 [Export] screen appears. % When you select the multiple spot color tables, [Export] is not available. % When a folder other than [Controller] is selected on the tree view, [Export] is not available. % Similar operation can be done when you select [File] menu - [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 94
9.9 Spot Color Table Management 9 % The priority of the registered spot color table become top among the spot color tables of the same name (group). When you change the priority of the spot color table in the image controller, refer to page 9-14. % When the profile is created by exporting the spot - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 95
9.9 Spot Color Table Management 9 Change the Spot Color Table Information You can change the spot color table information. 1 From the tree view and the list of [Spot Color Table Management] screen, select the spot color table to change the information. % For detailed information on how to connect - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 96
9.10 Spot Color Table Management 9 9.10 Spot Color Table Management This section describes how to manage the spot color stored in the spot color table. The management of the spot color uses [Spot Color] screen. For detailed information of [Spot Color] screen, refer to page 9-2. Rename the Spot - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 97
9.10 Spot Color Table Management 9 Delete the Spot Color You can delete the spot color within the spot color table. 1 Select the spot color to delete from the list of [Spot Color]. On the left of [Rename], the name of the selected spot color appears. 2 Click [Delete]. Confirmation screen appears. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 98
9.11 Initialize the Spot Color Screen 9 9.11 Initialize the Spot Color Screen The loaded spot color table and the result of spot color adjustment displayed on the [Spot Color] screen remain, until the time when screen is closed or reset. This section describes how to initialize [Spot Color] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 99
10 Alternative Color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 100
10.1 Outline of Alternative Color 10 10 Alternative Color 10.1 Outline of Alternative Color One alternative color table per color (RGB color/CMYK color) is stored in the image controller. The alternative color table replaces the specific RGB color/CMYK color within job with CMYK color ( - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 101
10.1 Outline of Alternative Color 10 Item [RGB] [CMYK] (list) [Show Device Value] [Original] [After Adjustment] [R], [G], [B] [C], [M], [Y], [K] [Select from Spot Color] [Priority] [New] [Delete] [Copy] [Register] [Help] Status bar Description Displays the screen to set the alternative color for - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 102
10.1 Outline of Alternative Color 10 List Items The composition of the list on [Alternative Color Management] screen differs per tab. When [RGB] tab is selected, the list on [Alternative Color Management] screen is composed as follows; Item [Original] [R], [G], [B] [After Adjustment] [C], [M], - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 103
10.1 Outline of Alternative Color 10 10.1.3 Basic Operation of [Alternative Color Management] screen This section describes basic operation of [Alternative Color Management] screen. 1 Select the input color of the alternative color setting. Or, create the new input color of the alternative color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 104
10.2 Select the Alternative Color / Add the New Alternative Color 10 10.2 Select the Alternative Color / Add the New Alternative Color When you adjust the existed alternative color setting, select the original color (input color) to which the alternative color can be set. When you add the new - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 105
10.2 Select the Alternative Color / Add the New Alternative Color 10 One line is added on the list. At the added line of the list, the RGB values displayed are all "255" and the CMYK values displayed are all "0". % When you adjust the added input color, go to the step described on page 10-8. % - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 106
10.3 Adjust the Input Color 10 10.3 Adjust the Input Color This section describes how to adjust the selected original color (input color) and how to adjust the added input color. When you don't need to adjust the selected input color or added input color, go to the step described on page 10-9. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 107
10.4 Adjust the Output Color 10 10.4 Adjust the Output Color This section describes how to adjust the output color. To adjust the output color, there are two methods. One is a method of specifying the value and the other is a method of selecting from the spot color. Specify the Value 1 Specify - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 108
10.4 Adjust the Output Color 10 [Select Spot Color] screen appears. 3 From the tree view, select the place to save the spot color table. The list appears according to the selection. 4 From the list, select the spot color table to select the spot color. 5 Click [OK]. [Select Spot Color] screen is - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 109
10.5 Change the Priority of the Alternative Color 10 10.5 Change the Priority of the Alternative Color This section describes how to change the priority of the alternative color settings in the alternative color table. The priority defines which alternative color setting is adopted to output when - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 110
10.6 Register the Alternative Color 10 10.6 Register the Alternative Color This section describes how to register the alternative color settings displayed on [Alternative Color Management] to the alternative color table which is used by the image controller. When you register the settings to the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 111
10.7 Alternative Color Management 10 10.7 Alternative Color Management This section describes how to manage the alternative color. Copy the Alternative Color You can duplicate the alternative color settings displayed on [Alternative Color Management] within the same alternative color table. When - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 112
10.7 Alternative Color Management 10 Delete the Alternative Color Setting You can delete the alternative color setting. 1 Select the alternative color setting to delete from the list of [Alternative Color Management]. % When you reload the information of the image controller connected currently, - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 113
11 Profile Management - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 114
11.1 Outline of Profile Management 11 11 Profile Management 11.1 Outline of Profile Management Use of the Color Centro enables to manage several profiles which are saved to the Local computer, Network computer, and the image controller, and are necessary for the color printing. The types of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 115
11.1 Outline of Profile Management 11 Item (tree view) (list) [New] [Edit] [Copy] [Delete] [Reload] [Change Table Information] [Export]/[Register] [Help] Status bar Description Displays the places where the various profiles are saved ([Controller], [Local], [My Documents] and [Network]) in the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 116
11.1 Outline of Profile Management 11 11.1.2 Menu of [Profile Management] screen The menu items of the [Profile Management] screen are as follows; Menu [File] [Help] Menu Items [Login] [Profile Type] [Reload] [Sort] [Change Table Information] [Delete] [Copy] [New] [Edit] [Export] [Import] [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 117
11.2 RGB Source Profile Management 11 11.2 RGB Source Profile Management This section describes how to copy, delete, reload, change table information, export, and import the RGB source profile. 11.2.1 Copy from the Image Controller You can make a duplication of the RGB source profile in the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 118
11.2 RGB Source Profile Management 11 11.2.2 Delete You can delete the saved RGB source profile. 1 Click [RGB Source Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [RGB Source Profile] from the displayed sub menu. 2 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 119
11.2 RGB Source Profile Management 11 11.2.3 Change the Information You can change the information of the saved RGB source profile. 1 Click [RGB Source Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [RGB Source - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 120
11.2 RGB Source Profile Management 11 11.2.4 Export from the Image Controller You can export the RGB source profile of the image controller to [Local], [My Documents] or [Network]. 1 Click [RGB Source Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 121
11.2 RGB Source Profile Management 11 11.2.5 Import (Register) to the Image Controller You can import (register) the RGB source profile of [Local], [My Documents] or [Network] in [Controller]. 1 Click [RGB Source Profile] on [Profile Management] screen. % Similar operation can be done when you - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 122
11.3 CMYK Target Profile Management 11 11.3 CMYK Target Profile Management This section describes how to copy, delete, reload, change table information, export, and import the CMYK target profile. 11.3.1 Copy from the Image Controller You can make a duplication of the CMYK target profile in the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 123
11.3 CMYK Target Profile Management 11 % You can delete the multiple CMYK target profiles. 3 Click [Delete]. Confirmation screen appears. % Similar operation can be done when you select [File] menu - [Delete]. % When you select the CMYK target profile which was registered at factory shipping, [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 124
11.3 CMYK Target Profile Management 11 11.3.4 Export from the Image Controller You can export the CMYK target profile of the image controller to [Local], [My Documents] or [Network]. 1 Click [CMYK Target Profile] on [Profile Management] screen. % Similar operation can be done when you select [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 125
11.3 CMYK Target Profile Management 11 [Import] screen appears. % When you select the multiple CMYK target profiles, [Import] is not available. % When a folder other than [Controller] is selected on the tree view, [Import] is not available. % Similar operation can be done when you select [File] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 126
how to create the new CMYK target profile by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can create the CMYK target profile. The flow of the wizard is as follows; Confirmation of Procedure Name and - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 127
11.4 Create the CMYK Target Profile 11 11.4.1 Launch Color Centro Profiler You can create the CMYK target profile by using Color Centro Profiler. 1 Click [CMYK Target Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 128
11.4 Create the CMYK Target Profile 11 11.4.2 Set the Profile Name and the Destination 1 Specify the name of CMYK target profile you create to [CMYK Target Profile Name] of [Name Settings] screen. % There is no need to enter the extension because of being added automatically. % You cannot save - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 129
11.4 Create the CMYK Target Profile 11 11.4.3 Select the Measurement Method 1 Select [New Measurement] or [Use Existing Measurement File]. % When you select [New Measurement], go to Step 4. % When you select [Use Existing Measurement File], go to Step 2. 2 Click [Browse]. [Open] screen appears. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 130
For detailed information on how to operate, refer to user's guide of instrument respectively. 1 From [Instrument], select the instrument to % For details of how to use instruments (colorimeters), refer to their instruction manuals. % The current position of the measurement appears on the chart image - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 131
11.4 Create the CMYK Target Profile 11 11.4.5 Select UCR/GCR Setting On the UCR/GCR Setting screen, select the UCR/GCR level concerning the generation of the Black separation on CMYK separation process. 1 Select the UCR/GCR level from [UCR/GCR Setting] of the UCR/GCR Setting screen. % You can - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 132
11.4 Create the CMYK Target Profile 11 A calculation is executed, and a profile is generated. After completing the calculation, the Calculation Result screen appears. % Go to the step described on page 11-20. 11.4.7 Confirm and Complete the Profile The Calculation Result screen displays the list - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 133
11.5 Printer Profile Management 11 11.5 Printer Profile Management This section describes how to copy, delete, reload, change table information, export and import the printer profile. 11.5.1 Copy from the Image Controller You can make a duplication of the printer profile in the image controller - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 134
11.5 Printer Profile Management 11 11.5.2 Delete You can delete the saved printer profile. 1 Click [Printer Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [Printer Profile] from the displayed sub menu. 2 From the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 135
11.5 Printer Profile Management 11 11.5.3 Change the Information You can change the information of the saved printer profile. 1 Click [Printer Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [Printer Profile] from - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 136
11.5 Printer Profile Management 11 11.5.4 Export from the Image Controller You can export the Printer Profile of the image controller to [Local], [My Documents] or [Network]. 1 Click [Printer Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 137
11.5 Printer Profile Management 11 11.5.5 Import (Register) to the Image Controller You can import (register) the Printer Profile of [Local], [My Documents] or [Network] in [Controller]. 1 Click [Printer Profile] on [Profile Management] screen. % Similar operation can be done when you select [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 138
how to create the new printer profile by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can create the printer profile. The flow of the wizard is as follows; Confirmation of Procedure Name and Destination - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 139
11.6 Create the Printer Profile 11 11.6.1 Launch Color Centro Profiler You can create the printer profile by using Color Centro Profiler. 1 Click [Printer Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [Printer - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 140
11.6 Create the Printer Profile 11 11.6.2 Set the Profile Name and the Destination 1 Specify the name of printer profile you create to [Printer Profile Name] of [Name Settings] screen. % There is no need to enter the extension because of being added automatically. % You cannot save the profile - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 141
. % When you use [Get Tray/Paper Profile information], go to Step 6. % When you set [Paper Type], [Paper Color], [Paper Weight] and [Glossy Mode] manually, go to Step 7. 5 On [Get paper Information] screen, select [Get Tray Information] or [Get Paper Profile] and select the tray information or paper - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 142
For detailed information on how to operate, refer to user's guide of instrument respectively. 1 From [Instrument], select the instrument % For details of how to use instruments (colorimeters), refer to their instruction manuals. % The current position of measurement appears on the chart image of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 143
11.6 Create the Printer Profile 11 5 Click [Save the Result] after completing the measurement. [Save As] screen appears. 6 Specify the saving place and file name, and click [Save]. Returns to the Chart Measurement screen after saving the measurement result file. 7 Click [Next]. the UCR/GCR Setting - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 144
11.6 Create the Printer Profile 11 11.6.6 Enter the Comment On the Comment screen, enter the comment to embed to the profile you create, as required. You can confirm the comment when you select the profile on Color Centro Profiler. 1 Enter the comment to [Comment (Optional)]. 2 Click [Next]. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 145
11.6 Create the Printer Profile 11 11.6.7 Confirm and Complete the Profile On the Calculation Result screen, displays the list of the setting of the generated printer profile. 1 Confirm the setting which is displayed on the Calculation Result screen. 2 Click [Next]. The Complete Profile Set - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 146
11.7 RGB-CMYK Device Link Profile Management 11 11.7 RGB-CMYK Device Link Profile Management This section describes how to copy, delete, reload, change table information, export and import the RGBCMYK device link profile. 11.7.1 Copy from the Image Controller You can make a duplication of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 147
11.7 RGB-CMYK Device Link Profile Management 11 11.7.2 Delete You can delete the saved RGB-CMYK device link profile. 1 Click [RGB-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [RGB-CMYK Device Link - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 148
11.7 RGB-CMYK Device Link Profile Management 11 11.7.3 Change the Information You can change the information of the saved RGB-CMYK device link profile. 1 Click [RGB-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 149
11.7 RGB-CMYK Device Link Profile Management 11 11.7.4 Export from the Image Controller You can export the RGB-CMYK Device Link Profile of the image controller to [Local], [My Documents] or [Network]. 1 Click [RGB-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 150
11.7 RGB-CMYK Device Link Profile Management 11 11.7.5 Import (Register) to the Image Controller You can import (register) the RGB-CMYK Device Link Profile of [Local], [My Documents] or [Network] in [Controller]. 1 Click [RGB-CMYK Device Link Profile] on [Profile Management] screen. % Similar - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 151
to create the new RGB-CMYK device link profile by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can create the RGB-CMYK device link profile. The flow of the wizard is as follows; Confirmation of Procedure - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 152
11.8 Create the RGB-CMYK Device Link Profile 11 11.8.1 Launch Color Centro Profiler You can create the RGB-CMYK device link profile by using Color Centro Profiler. 1 Click [RGB-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 153
11.8 Create the RGB-CMYK Device Link Profile 11 11.8.2 Set the Profile Name and the Destination 1 Specify the name of RGB-CMYK device link profile you create to [RGB-CMYK Device Link Profile Name] of [Name Settings] screen. % There is no need to enter the extension because of being added - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 154
11.8 Create the RGB-CMYK Device Link Profile 11 11.8.3 Determine the Profiles On the Profile Determination screen, specify the printer profile and the RGB source profile which are used by RGB-CMYK device link profile. In addition, you can create the printer profile as required. 1 Specify the name - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 155
11.8 Create the RGB-CMYK Device Link Profile 11 % When you click [Browse], go to Step 4. % When you select [sRGB] or [AdobeRGB], go to Step 5. 4 On the screen displayed by clicking [RGB Source Profile] - [Browse], select the RGB source profile used and click [Open]. The selected RGB source profile - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 156
11.8 Create the RGB-CMYK Device Link Profile 11 % Click [Browse] to display the screen to select the image for printing. % Click [Select Tray] to display the screen to specify the tray used by confirmation printing. % From [Screen Setting], select the screen setting used by confirmation printing. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 157
11.8 Create the RGB-CMYK Device Link Profile 11 11.8.6 Confirm and Complete the Profile On the Calculation Result screen, displays the list of the setting of the generated RGB-CMYK device link profile. 1 Confirm the setting which is displayed on the Calculation Result screen. 2 Click [Next]. The - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 158
of the point color per object and the adjustment of the profile curve. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can edit the RGB-CMYK device link profile. The flow of the wizard is as follows; Confirmation of Procedure Name - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 159
11.9 Edit the RGB-CMYK Device Link Profile 11 11.9.1 Launch Color Centro Profiler You can edit the RGB-CMYK device link profile by using Color Centro Profiler. 1 Click [RGB-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 160
11.9 Edit the RGB-CMYK Device Link Profile 11 11.9.2 Set the Profile Name and the Destination 1 Specify the name of RGB-CMYK device link profile you edit to [RGB-CMYK Device Link Profile Name] of [Name Settings] screen. % When you save the RGB-CMYK device link profile with another name or to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 161
11.9 Edit the RGB-CMYK Device Link Profile 11 11.9.3 Adjust the Point Color / Profile Curve On the Point Color Adjustment/Profile Curve Adjustment screen, you can execute the adjustment of the specified color outputting and profile curve. 1 When you execute the adjustment of the point color and - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 162
11.9 Edit the RGB-CMYK Device Link Profile 11 [Confirmation Print] screen appears. 5 Specify the setting of confirmation printing and click [Print]. % Click [Browse] to display the screen to select the image for printing. % Click [Select Tray] to display the screen to specify the tray used by - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 163
11.9 Edit the RGB-CMYK Device Link Profile 11 Add the New Spot Color 1 Click [New]. A numbered line is added on [Adjustment Point]. 2 Specify the value (0 to 255) of the added point color of the added line to [R], [G] and [B]. Or, select the color from [Color Setting] screen displayed by clicking - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 164
11.9 Edit the RGB-CMYK Device Link Profile 11 Edit the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to edit. The input color is displayed on the lower of the Sample Color (below [Result]). 2 From [Effective Range], select the effective range. The color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 165
11.9 Edit the RGB-CMYK Device Link Profile 11 5 To execute the adjustment of the profile curve, you can drag and move the beginning point/ending point (at both ends of the profile curve) and adjustment points (added by the clicking on the profile curve). % The selected adjustment point appears as - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 166
11.10 CMYK-CMYK Device Link Profile Management 11 11.10 CMYK-CMYK Device Link Profile Management This section describes how to copy, delete, reload, change table information, export, and import the CMYKCMYK device link profile. 11.10.1 Copy from the Image Controller You can make a duplication of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 167
11.10 CMYK-CMYK Device Link Profile Management 11 11.10.2 Delete You can delete the saved CMYK-CMYK device link profile. 1 Click [CMYK-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile Type] and select [CMYK-CMYK Device - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 168
11.10 CMYK-CMYK Device Link Profile Management 11 11.10.3 Change the Information You can change the information of the saved CMYK-CMYK device link profile. 1 Click [CMYK-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] menu - [Profile - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 169
11.10 CMYK-CMYK Device Link Profile Management 11 11.10.4 Export from the Image Controller You can export the CMYK-CMYK Device Link Profile of the image controller to [Local], [My Documents] or [Network]. 1 Click [CMYK-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 170
11.10 CMYK-CMYK Device Link Profile Management 11 11.10.5 Import (Register) to the Image Controller You can import (register) the CMYK-CMYK Device Link Profile of [Local], [My Documents] or [Network] in [Controller]. 1 Click [CMYK-CMYK Device Link Profile] on [Profile Management] screen. % Similar - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 171
create the new CMYK-CMYK device link profile by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can create the CMYK-CMYK device link profile. The flow of the wizard is as follows; Confirmation of Procedure - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 172
11.11 Create the CMYK-CMYK Device Link Profile 11 11.11.1 Launch Color Centro Profiler You can create the CMYK-CMYK device link profile by using Color Centro Profiler. 1 Click [CMYK-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you select [File] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 173
11.11 Create the CMYK-CMYK Device Link Profile 11 11.11.2 Set the Profile Name and the Destination 1 Specify the name of CMYK-CMYK device link profile you create to [CMYK-CMYK Device Link Profile Name] of [Name Settings] screen. % There is no need to enter the extension because of being added - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 174
11.11 Create the CMYK-CMYK Device Link Profile 11 11.11.3 Determine the Profiles On the Profile Determination screen, specify the printer profile and the CMYK target profile which are used by CMYK-CMYK device link profile. In addition, you can create the printer profile and the CMYK target profile - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 175
11.11 Create the CMYK-CMYK Device Link Profile 11 % When you click [Browse], go to Step 4. % When you click [Create], go to the steps described from page 11-16 to page 11-20. 4 On the screen displayed by clicking [CMYK Target Profile] - [Browse], select the CMYK target profile used and click [Open - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 176
11.11 Create the CMYK-CMYK Device Link Profile 11 % The setting of [G] is the setting for the color composed of [C] and [Y]. % The setting of [B] is the setting for the color composed of [C] and [M]. % In some cases, you can't set [Preserve Mid-Tone] and [Preserve Solid] at the same time. 4 Click - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 177
11.11 Create the CMYK-CMYK Device Link Profile 11 11.11.5 Enter the Comment On the Comment screen, enter the comment to embed to the profile you create, as required. You can confirm the comment when you select the profile on Color Centro Profiler. 1 Enter the comment to [Comment (Optional)]. 2 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 178
11.11 Create the CMYK-CMYK Device Link Profile 11 11.11.7 Select the Task On the Select Task screen, you can select whether to finish or to execute Measurement Feedback. 1 Select [Finish] or [Execute Measurement Feedback]. % The measurement feedback is the operation to improve the accuracy of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 179
selected instrument. 0 According to the selected instrument, measurement operations differ. For detailed information on how to operate, refer to user's guide of instrument respectively. 1 To start the measurement feedback, click [Adjust]. [Feedback] screen appears. 2 Click [Measure]. IC-601 11-67 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 180
According to the selected instrument, the operation screen appears. Follow the instructions on the pages that follow. % The current position of measurement appears line. % For detailed information on how to operate, refer to user's guide of each instrument. % To stop the measurement, click [Stop]. % - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 181
11.11 Create the CMYK-CMYK Device Link Profile 11 On [Feedback] screen, the new measurement data is added. The attained level which indicates the improvement of the accuracy is displayed on [Attained Level] % The attained level is indicated in 3 levels. The maximum level of the attained level is - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 182
11.11 Create the CMYK-CMYK Device Link Profile 11 11.11.9 Complete the Profile On the Complete the Profile screen, finish the task. 1 Click [Finish]. The wizard is completed. Color Centro Profiler is closed to return to [Profile Management ] screen. IC-601 11-70 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 183
of the point color per object and the adjustment of the profile curve. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can edit the CMYK-CMYK device link profile. The flow of the wizard is as follows; Task Selection Confirmation of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 184
11.12 Edit the CMYK -CMYK Device Link Profile 11 11.12.1 Launch Color Centro Profiler and Select the Task You can edit the CMYK-CMYK device link profile by using Color Centro Profiler. 1 Click [CMYK-CMYK Device Link Profile] on [Profile Management] screen. % Similar operation can be done when you - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 185
11.12 Edit the CMYK -CMYK Device Link Profile 11 11.12.2 Confirm the Procedure According to the selection of the task, the content of the Confirmation of procedure differ. This section describes the example on which you select [Execute the Measurement Feedback]. 1 Confirm the content of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 186
11.12 Edit the CMYK -CMYK Device Link Profile 11 2 Click [Browse]. [Select Destination Folder] screen appears. 3 Select the destination folder for saving the CMYK -CMYK device link profile you edit and click [OK]. The destination folder and file name are displayed on [Destination Folder] and [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 187
11.12 Edit the CMYK -CMYK Device Link Profile 11 11.12.5 Adjust the Point Color / Profile Curve On the Point Color Adjustment/Profile Curve Adjustment screen, you can execute the adjustment of the specified color outputting and profile curve. 1 When you execute the adjustment of the point color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 188
11.12 Edit the CMYK -CMYK Device Link Profile 11 [Confirmation Print] screen appears. 5 Specify the setting of confirmation printing and click [Print]. % Click [Browse] to display the screen to select the image for printing. % Click [Select Tray] to display the screen to specify the tray used by - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 189
11.12 Edit the CMYK -CMYK Device Link Profile 11 3 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color (below the [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 190
11.12 Edit the CMYK -CMYK Device Link Profile 11 Adjust the Profile Curve 1 From [Adjustment Curve], select [Input] or [Output]. % When you execute the adjustment of input curve, select [Input]. % When you execute the adjustment of output curve, select [Output]. 2 Select the combination of colors - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 191
11.12 Edit the CMYK -CMYK Device Link Profile 11 11.12.6 Complete the Profile On the Complete the Profile screen, finish the task. 1 Click [Finish]. The wizard is completed. Color Centro Profiler is closed to return to [Profile Management ] screen. IC-601 11-79 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 192
12 Color Default Settings - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 193
12.1 Outline of Color Default Settings 12 12 Color Default Settings 12.1 Outline of Color Default Settings Use of the Color Centro enables to adjust the default color settings of the image controller. The default color settings which are set on this function are applied to the job without - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 194
12.1 Outline of Color Default Settings 12 When [Other Settings] tab is selected, [Color Default Settings] screen is composed as follows; Item [Default Color Configuration Settings] [RGB] [CMYK] [Other Settings] IC-601 Description Displays the Default Color Configuration of the image controller. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 195
12.1 Outline of Color Default Settings 12 Item [RGB] [CMYK] [Other Settings] [Register] [Help] Status bar Description [No Color Conversion] [Use RGB-CMYK Device Link Profile] [Use RGB Source Profile] [Rendering] [RGB Simulation] [No Color Conversion] [Use CMYK-CMYK Device Link Profile] [Use CMYK - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 196
. % For detailed information on how to confirm the name of Default Color Configuration, refer topage 10-6. 2 Set the default settings of the RGB-CMYK conversion manually. % For detailed information on how to set the RGB-CMYK conversion, refer to page 12-7. 3 Set the default settings of the CMYK-CMYK - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 197
12.2 Confirm the name of Default Color Configuration 12 12.2 Confirm the name of Default Color Configuration This section describes how to confirm the name of Default Color Configuration. 1 Confirm [Default Color Configuration Settings] on [Color Default Setting] screen. % For detailed - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 198
Settings This section describes how to set the Color Default Settings of the image controller manually. The Color Default Settings function is used on screens displayed par 3 tabs. 12.3.1 Set the Default Settings of the RGB-CMYK Conversion On [RGB] tab - [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 199
12.3 Default Manual Settings 12 12.3.3 Set the Other Default Settings On [Other Settings] tab - [Color Default Settings] screen, you can set the default settings for the other - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 200
12.4 Set Color Verification 12 12.4 Set Color Verification This section describes how to set the color bar and the color setting information. 1 From [File] menu, select [Color Verification]. [Color Verification] appears. 2 Click [The Color Setting Information] when you set the content of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 201
tab [No Color Conversion] [Use RGB-CMYK Device Link Profile] [Use RGB Source Profile] [Rendering] RGB Simulation Check Job OFF OFF ON C8000/C7000/C6000: Saturation C70hc: Perceptual OFF [CMYK] tab [No Color Conversion] [Use CMYK-CMYK Device Link Profile] [Use CMYK Target Profile] [Paper Simulation - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 202
12.6 Color Default Settings 12 12.6 Color Default Settings This section describes how to register the settings of [Color Default Settings] to the image controller as the default settings. 1 Click [Register] on [Color Default Settings] screen. Registration in image controller is executed. IC-601 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 203
13 Color Configuration Management - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 204
13.1 Outline of Color Configuration Management 13 13 Color Configuration Management 13.1 Outline of Color Configuration Management Use of the Color Centro enables to set and manage "Profile Set" which is consolidated with several device link profiles and several device profiles which are used - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 205
13.1 Outline of Color Configuration Management 13 13.1.2 Outline of Color Configuration To correspond to the multiple paper types, Color Configuration is consolidated with the multiple Profile Sets. When you specify one Color Configuration, to correspond to all paper types which are used on the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 206
13.1 Outline of Color Configuration Management Color Configuration Basic Color Setting Information Spot Color (ON/OFF) Black Overprint (ON/OFF) Alternative Color (ON/OFF) RGB Simulation (ON/OFF) Pure Black (OFF/Text/Text & Graphic) Gray Replacement Composite Overprint (OFF/High Quality/High Speed) - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 207
13.1 Outline of Color Configuration Management 13 13.1.3 [Color Configuration Management] screen The Color Configuration management function of Color Centro uses [Color Configuration Management] screen. [Color Configuration Management] screen appears by clicking [Color Configuration Management] - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 208
13.1 Outline of Color Configuration Management 13 Item [Reload] [Help] Description Updates the information of the list. Displays the Help of this screen. List Items The Color Configuration list and Profile Set list are displayed on [Color Configuration Management] screen. The list items of the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 209
13.1 Outline of Color Configuration Management 13 13.1.4 Menu of [Color Configuration Management] screen The menu items of the [Color Configuration Management] screen are as follows; Menu [File] [Help] Menu Items [New] [Edit] [Delete] [Copy] [Reload] [Set to Default Color Configuration] [Back to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 210
13.2 Create the new Color Configuration 13 13.2 Create the new Color Configuration This section describes how to create the new Color Configuration. 13.2.1 Set the Name of Color Configuration 1 Click [New] of the Color Configuration list. The added line is displayed as "Creating newly" at the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 211
can switch the display of the list item to non-display. For how to operate it, refer to page 14-3. 2 To set the Profile Set manually, remove the check mark of [Select Nearest Profile Set]. To set the Profile Set automatically, check [Select Nearest Profile Set]. % When you check [Select Nearest - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 212
13.2 Create the new Color Configuration 13 13.2.4 Set the Color Conversion Option Specify the Color Conversion setting to use as default for the Color Configuration you create. 1 Click [Color Conversion Option Settings] - [Setting]. [Color Conversion Settings] appears. 2 Select the setting of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 213
13.3 Edit the Color Configuration 13 13.3 Edit the Color Configuration This section describes how to edit the Color Configuration. 1 From the Color Configuration list, select the Color Configuration to edit. % For detailed information on how to connect another controller, refer to page 14-2. % - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 214
13.4 Color Configuration Management 13 13.4 Color Configuration Management This section describes how to manage the Color Configuration. 13.4.1 Change the Default Color Configuration 1 From the Color Configuration list, select the Color Configuration you use as default. % For detailed - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 215
13.4 Color Configuration Management 13 3 To delete, click [OK]. The selected Color Configuration is deleted. % When you select the multiple Color Configurations, all of those are deleted at a time. % You can't restore the Color Configuration you have deleted. 13.4.4 Import (Register) / Export the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 216
13.4 Color Configuration Management 13 Exporting to the specified place is executed. [Export] screen is closed to return to [Import/Export] screen. Import (Register) the Color Configuration 1 From the [File] menu, select [Import/Export]. [Import/Export] screen appears. 2 Select the places from [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 217
describes how to create the new Profile Set by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can create the Profile Set. The created Profile Set is saved to the image controller. The flow of the wizard - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 218
13.5 Create the Profile Set 13 13.5.1 Launch Color Centro Profiler You can create the Profile Set by using Color Centro Profiler. 1 Click [Profile Set] - [New] on [Color Configuration Management] screen. Color Centro Profiler is launched as wizard and then [Confirmation of procedure] screen - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 219
13.5 Create the Profile Set 13 13.5.3 Determine the Profiles On the Profile Determination screen, specify the printer profile, the CMYK target profile and the RGB source profile which are used by Profile Set. In addition, you can create the printer profile and the CMYK target profile as required. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 220
13.5 Create the Profile Set 13 % When you click [Browse], go to Step 4. % When you click [Create], go to the steps described from page 11-16 to page 11-20. 4 On the screen displayed by clicking [CMYK Target Profile] - [Browse], select the CMYK target profile used and click [Open]. The selected - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 221
13.5 Create the Profile Set 13 % The setting of [C], [M], [Y] and [K] is the setting for the color composed of C/M/Y/K only. % The setting of [R] is the setting for the color composed of [M] and [Y]. % The setting of [G] is the setting for the color composed of [C] and [Y]. % The setting of [B] is - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 222
13.5 Create the Profile Set 13 13.5.5 Enter the Comment On the Comment screen, enter the comment to embed in the Profile Set you create, as required. You can confirm the comment when you select the Profile Set on Color Centro Profiler. 1 Enter the comment to [Comment (Optional)]. 2 Click [Next]. - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 223
13.5 Create the Profile Set 13 13.5.7 Select the Task On the Select Task screen, you can select whether to finish or to execute Measurement Feedback. 1 Select [Finish] or [Execute Measurement Feedback]. % The measurement feedback is the operation to improve the accuracy of the CMYK-CMYK - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 224
13.5 Create the Profile Set 13 13.5.9 Complete the Profile Set On the Complete the Profile Set screen, finish the task. 1 Click [Finish]. The wizard is completed. Color Centro Profiler is close to return to [Color Configuration Management] screen. IC-601 13-22 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 225
to edit the component profile of Profile Set by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can edit the component profile of Profile Set. The flow of the wizard is as follows; Confirmation of Procedure - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 226
13.6 Edit the Component Profile of Profile Set 13 13.6.1 Launch Color Centro Profiler You can edit the Profile Set by using Color Centro Profiler. 1 Click [Profile Set] - [Edit] on Color Configuration Management screen. [Color Centro Profiler] screen appears. 2 From the list, select the Profile - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 227
13.6 Edit the Component Profile of Profile Set 13 13.6.2 Set the Profile Set Name and the Destination 1 Specify the name of Profile Set you edit in [Profile Set Name] of [Name Settings] screen. % When you save the Profile Set with another name or to another place, enter the profile name and go - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 228
13.6 Edit the Component Profile of Profile Set 13 13.6.3 Determine the Profiles On the Profile Determination screen, as required, change the printer profile, the CMYK target profile and the RGB source profile which are used by Profile Set. In addition, you can create the printer profile and the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 229
13.6 Edit the Component Profile of Profile Set 13 % When you click [Browse], go to Step 4. % When you click [Create], go to the steps described from page 11-16 to page 11-20. 4 On the screen displayed by clicking [CMYK Target Profile] - [Browse], select the CMYK target profile used and click [Open - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 230
13.6 Edit the Component Profile of Profile Set 13 13.6.5 Customize the Color Conversions When you have set to recalculate or replace the device link profile which was made on Color Centro Profiler, set the color conversions on the Customize Color Conversions screen. On the Customize Color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 231
13.6 Edit the Component Profile of Profile Set 13 4 From [RGB-CMYK Conversion] of [ RGB Image], [RGB Graphic] and [RGB Text] on the Customize Color Conversions screen, select the rendering intent for each object. % [Perceptual (RGB Image)] is the recommended setting of RGB Image to represent the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 232
13.6 Edit the Component Profile of Profile Set 13 13.6.6 Enter the Comment On the Comment screen, enter the comment to embed in the Profile Set you create, as required. You can confirm the comment when you select the Profile Set on Color Centro Profiler. 1 Enter the comment to [Comment (Optional - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 233
13.6 Edit the Component Profile of Profile Set 13 3 Click [Finish]. The wizard is completed. Color Centro Profiler is close to return to [Color Configuration Management] screen. IC-601 13-31 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 234
the measurement feedback for Profile Set by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can execute the measurement feedback. The flow of the wizard is as follows; Confirmation of Procedure Name and - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 235
13.7 Improve the Accuracy of the Profile Set 13 13.7.1 Launch Color Centro Profiler 1 Click [Profile Set] - [Edit] on Color Configuration Management screen. [Color Centro Profiler] screen appears. 2 From the list, select the Profile Set to execute the measurement feedback and click [Measurement - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 236
13.7 Improve the Accuracy of the Profile Set 13 13.7.2 Set the Profile Set Name and the Destination 1 Specify the name of Profile Set you edit in [Profile Set Name] of [Name Settings] screen. % When you save the Profile Set with another name or to another place, enter the profile name and go to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 237
the selected instrument. 0 According to the selected instrument, measurement operations differ. For detailed information on how to operate, refer to user's guide of instrument respectively. 1 To start the measurement feedback, click [Adjust] of the CMYK object to execute. [Feedback] screen appears - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 238
According to the selected instrument, the operation screen appears. Follow the instructions on the pages that follow. % The current position of measurement appears line. % For detailed information on how to operate, refer to user's guide of each instrument. % To stop the measurement, click [Stop]. % - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 239
13.7 Improve the Accuracy of the Profile Set 13 On [Feedback] screen, the new measurement data is added. The attained level which indicates the improvement of the accuracy is displayed on [Attained Level] % The attained level is indicated in 3 levels. The maximum level of the attained level is - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 240
13.7 Improve the Accuracy of the Profile Set 13 13.7.4 Complete the Profile Set On the Complete the Profile Set screen, finish the task. 1 Click [Finish]. The wizard is completed. [Color Centro Profiler] screen returns. 2 On [Color Centro Profiler] screen, from the [File] menu, select [Exit]. [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 241
curve adjustment for Profile Set by launching Color Centro Profiler. The wizard screen appears by launching Color Centro Profiler. Following the instructions of the screen, you can execute the point color adjustment/profile curve adjustment. The flow of the wizard is as follows; Confirmation - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 242
13.8 Adjust the Color Conversions of Profile Set 13 13.8.1 Launch Color Centro Profiler 1 Click [Profile Set] - [Edit] on Color Configuration Management screen. [Color Centro Profiler] screen appears. 2 From the list, select the Profile Set to execute the point color adjustment/profile curve - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 243
13.8 Adjust the Color Conversions of Profile Set 13 13.8.2 Set the Profile Set Name and the Destination 1 Specify the name of Profile Set you edit in [Profile Set Name] of [Name Settings] screen. % When you save the Profile Set with another name or to another place, enter the profile name and go - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 244
13.8 Adjust the Color Conversions of Profile Set 13 13.8.3 Adjust the Point Color / Profile Curve You can execute the point color adjustment/profile curve adjustment per CMYK object (CMYK Image, CMYK Graphic and CMYK Text). 1 To execute the point color adjustment/profile curve adjustment, click [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 245
13.8 Adjust the Color Conversions of Profile Set 13 [Confirmation Print] screen appears. 6 Specify the setting of confirmation printing and click [Print]. % Click [Browse] to display the screen to select the image for printing. % Click [Select Tray] to display the screen to specify the tray used - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 246
13.8 Adjust the Color Conversions of Profile Set 13 3 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color (below the [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 247
13.8 Adjust the Color Conversions of Profile Set 13 Adjust the Profile Curve 1 From [Adjustment Curve], select [Input] or [Output]. % When you execute the adjustment of input curve, select [Input]. % When you execute the adjustment of output curve, select [Output]. 2 Select the combination of - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 248
13.8 Adjust the Color Conversions of Profile Set 13 13.8.4 Complete the Profile Set On the Complete the Profile Set screen, finish the task. 1 Click [Finish]. The wizard is completed. [Color Centro Profiler] screen returns. 2 On [Color Centro Profiler] screen, from the [File] menu, select [Exit - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 249
13.9 Profile Set Management 13 13.9 Profile Set Management On [Color Centro Profiler] screen, you can manage Profile Set. This section describes how to manage the new Profile Set by launching Color Centro Profiler. 13.9.1 Export Profiles You can export profiles form the Profile Set. 1 Click [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 250
13.9 Profile Set Management 13 When you check [Create New Folder with Profile Set Name], the folder with the name of the Profile Set is created at the selected place. 6 On [Select Export Profile Type], check the profile to export and click [OK]. The selected profiles are exported to the specified - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 251
13.9 Profile Set Management 13 4 Specify [Profile Set Name] (in case of the image controller) or [File Name] (in case of local/network). % You cannot save the Profile Set of the same name with those in the image controller. % When you copy to the image controller, specify the Profile Set Name - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 252
13.9 Profile Set Management 13 13.9.4 Refresh the List (Reload) 1 Click [Profile Set] - [Edit] on Color Configuration Management screen. [Color Centro Profiler] screen appears. 2 From the tree view and the list of [Management of the Existing Profile sets], select the folder to reload. % For - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 253
13.9 Profile Set Management 13 13.9.6 Change the Profile Set Information 1 Click [Profile Set] - [Edit] on Color Configuration Management screen. [Color Centro Profiler] screen appears. 2 From the tree view and the list of [Management of the Existing Profile sets], select the Profile Set to - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 254
13.9 Profile Set Management 13 13.9.7 Export the Profile Set You can export the RGB source profile of the image controller to Local or Network. 1 Click [Profile Set] - [Edit] on Color Configuration Management screen. [Color Centro Profiler] screen appears. 2 From the tree view and the list of [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 255
13.10 Environmental Setting 13 13.10 Environmental Setting You can select the monitor profile to match the adjustment point and the adjusted color accurately on the monitor when the point color adjustment is executed. This section describes how to set the monitor profile as the environmental - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 256
14 Other Functions - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 257
14.1 Re-login on Connection Switching 14 14 Other Functions 14.1 Re-login on Connection Switching When you connect to the image controller which is different from the image controller currently connected, operate as follows; 0 When there are unregistered settings for the image controller - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 258
14.2 List Operation 14 14.2 List Operation 14.2.1 Sorting by List Item You can sort the content by the list item on the following lists; - List of [Tone Curve Adjustment] screen - List of [Spot Color Table Management] screen - List of [Profile Management] screen - List of [Color Configuration - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 259
Print Setting(s)], select the paper tray and the paper size for printing of the setting list and click [Print]. The setting list is printed. % It supports only Japanese and English. If the display language is selected as other than Japanese in Color Centro, it will be printed in English. IC-601 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 260
14.4 Suspend and Restart 14 14.4 Suspend and Restart When you click [Suspend the Operation] on the wizard screen of Color Centro Profiler, [Save As] screen appears. Using the saved file, you can restart the operation. 14.4.1 Suspend the Operation This section describes how to save the suspended - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 261
14.4 Suspend and Restart 14 14.4.2 Restart the Suspended Operation When you click [Suspend the Operation] on the wizard screen of Color Centro Profiler, [Save As] screen appears. This section describes how to restart the operation using the saved file. 1 Click [Profile Set] - [Edit] on Color - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 262
characteristics of bizhub PRESS C70hc. Also, Vivid Mode has 2 kinds of modes; RGB Vivid Mode and CMYK Vivid Mode. 14.5.1 Preparation of Vivid Mode You need to import the color configuration of Vivid Mode. The color configuration is in the following. - [My Documents\KONICA MINOLTA\Color Centro - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 263
14.5 Vivid Mode for bizhub PRESS C70hc 14 Switch the Profile Set When you import the Color Configuration of C70hc, CMYK_VIVID_1 is selected as a default profile set by default. To switch - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 264
14.5 Vivid Mode for bizhub PRESS C70hc 14 3 Check each check box of a profile set to which you want to switch in [Default Profile Set] and [Paper Type Default], and click [ - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 265
15 Troubleshooting - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 266
. Check the control panel of this machine. Confirm the JSP settings of the image controller. Check the control panel of this machine. When the above troubleshooting does not eliminate the problem, refer to the [User's Guide - POD Administrator's Reference]. IC-601 15-2 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 267
Reader9, the application might execute another color conversion. There may be problem on recognizing the bar (black bold line) or the mark ( setting in each application, refer to help and the manual etc. of each application. Confirm the manual of the measurement instrument. A dotted line for the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 268
16 Appendix - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 269
16.1 Scan Calibration You can calibrate the scanner by pressing [MACHINE] - [Controller] - [Scan Calibration]. 1 Press [MACHINE] - [Controller]. 2 Press [Scan Calibration]. 3 Press [Change] for Paper Size. 4 Select a paper size and press [OK]. % For [Paper Size], you can select either [A3 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 270
16.1 Scan Calibration 16 5 Press [Change] for Paper Type. 6 Select a paper type and press [OK]. % For [Paper Type], you can select either [Plain], [Fine], [Color Specific], [Coated GL], [Coated ML], [Coated GO], or [Coated MO]. 7 Press [Change] for Screen Type. IC-601 16-3 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 271
16.1 Scan Calibration 16 8 Select a screen type and press [OK]. % For [Screen Type], you can select either [Dot 1], [Dot 2], [Line 1], [Line 2], [Stochastic]. 9 Press [Print Chart]. % The chart print is started. IC-601 16-4 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 272
16.1 Scan Calibration 16 10 Press [Close]. 11 Press [Scan]. 12 Set the printed chart on the original glass and press [Scan]. IC-601 % Set the chart with its [This side is FRONT!] note to the front and [This side is REAR!] note to the back on the original glass. 16-5 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 273
16.1 Scan Calibration 16 13 Click [Close] once the calibration is completed. IC-601 16-6 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 274
by a computer or printer. A byte consists of eight bits. A computer using services provided by servers via the network. A device, such as a computer or router, you to construct a network without IP address conflicts or other troubles. Abbreviation of Domain Name Systems. DNS allows for obtaining the - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 275
off, while others not. The acronym for Novell Distributed Print Services. This provides a high performance printing solution in NDS environments. uses NetWare IPX/SPX for the communication protocol. A remote printer support module used when using a printer server in NetWare environments. Rprinter - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 276
The acronym for Page Description Language. This is a language used to instruct a page printer about images being printed on each page. A type computers. The acronym for Service Location Protocol. This is a protocol that provides capabilities such as finding services or automatic client configuration - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 277
is a service, available in Windows environments, to call the name server responsible for conversion between a computer name and an IP address. Abbreviation of XML Paper Specification. This is one of the electronic document formats developed by Microsoft Corporation. It is first supported in Windows - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 278
13-2 Color Default Settings 12-2 Control Panel 2-4 Conventions used in this manual 1-3 G Glossary 16-7 I Input Color 10-8 Installation 4-2 Instrument 7-6 5-7, 9-2 Spot Color Table 9-5 T TCP/IP Settings 3-3 Tone Curve Adjustment 5-6, 8-2 Trouble 15-2 V Vivid Mode 14-7 IC-601 16-11 - Konica Minolta bizhub PRESS C8000 | IC-601 Color Centro User Guide - Page 279
http://konicaminolta.com A1DU9551-CC-33 2010 Copyright 2011. 4
IC-601
Color Centro