Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Quick Guide
Konica Minolta bizhub PRO 1100 Manual
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Konica Minolta bizhub PRO 1100 manual content summary:
- Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 1
Quick Guide 1 Before Getting Started 2 Let's Make Prints 3 Installing Software 4 Basic Operations 5 Maintaining the Finishing Quality 6 Troubleshooting 7 Appendix - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 2
Guide describes basic operations, maintenance, troubleshooting for this machine. This information will be useful to enable the full capabilities of this machine and to utilize such functionality efficiently. Please keep this manual or originals. Follow the instructions to avoid property damage. Tips - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 3
bizhub PRO 1100 Intended use of this machine Intended use This machine is designed to be manage consumables, and perform the maintenance and troubleshooting described in user's guides. - Administrator: Person who has been trained by Konica Minolta or authorized partner to manage consumables, adjust - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 4
users to perform maintenance work or troubleshooting operations. Maintenance and troubleshooting operations should be carried out as instructed in this guide and the HTML User's Guide included in the User's Guide CD. Should you experience any problems, contact your service representative. x-ii - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 5
bizhub PRO 1100 HTML User's Guide operating environment )Supported Operating Systems/Browsers This guide describes the operation verification in the operating systems and browsers shown below. Operating system Windows Vista (Service Pack 2) Windows 7 (Service be forewarned. - Problems may be able - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 6
Configuration and Usage of this Guide Conventions used in this guide This guide describes product names and system configurations as follows. Product name bizhub PRO 1100 Microsoft Windows Conventions used in this guide This machine: Indicates the entire system including options and functions. - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 7
bizhub PRO 1100 Make a Note about This Machine Information Checking the mounted optional devices Get to know the optional devices mounted on this machine. You can check a part of the mounted optional devices on the [MACHINE] screen of the touch panel. Select the check boxes ( ) of the installed - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 8
privilege may be required. Contact your machine administrator. NOTICE NOTICE Some notes may include confidential information. Handle this guide with great care. In particular, do not enter information such as the password. Item Example: JSP port number Entry field Example: 30081 x-vi - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 9
bizhub PRO 1100 Contents Intended use of this machine x-i Intended use x-i Impermissible operating conditions x-i Exclusion of liability x-i Target groups x-i Configuration and Usage of this Guide x-ii HTML User's Guide operating environment x-iii Supported printer driver and applications - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 10
environment 3-1 In a Macintosh environment 3-1 Characteristics of printer driver 3-1 In a Windows environment 3-2 Installation 3-2 Default setting 3-4 In a Macintosh environment 3-5 Installation 3-5 Default setting 3-8 3.2 Installing Applications 3-9 Operating environment 3-9 Color - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 11
bizhub PRO 1100 6 Troubleshooting 6.1 Replenish and Replace Consumables 6-1 Replacing a toner bottle 6-1 Replenishing staple cartridge supply 6-3 Replacing a waste toner box 6-5 6.2 Clearing Paper Jams 6-7 How to view the animation guide 6-7 [JAM Position] screen 6-7 Illustration - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 12
Contents 7.5 Weight for each size 7-22 Weight for each size 7-22 7.6 Maximum paper size and printing area 7-23 x-x - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 13
1 Before Getting Started bizhub PRO 1100 1.1 Turning the Power ON/OFF )Power supply This the start screen has been displayed, the default screen is displayed. The default screen can be selected from Utility/Counter. For details, refer to the HTML User's Guide. When [Ready to print] is displayed - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 14
changes from blue to orange. NOTICE NOTICE While the following message is displayed, do not turn off the main power switch. Otherwise, a problem such as a toner fixation in the machine may occur. [Cooling in progress / Power is turned off automatically] [Power off in progress / Please do not turn - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 15
bizhub PRO 1100 )Power-saving function Using the following functions can reduce the automatically re- leased during Auto Shut OFF only when the machine receives print jobs from [PS Plug-in driver] or [PageScope Direct Print], allowing them to be outputted. To process other jobs, use this machine - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 16
Save Function Setting]. Reference For details about how to configure and use the above functions, refer to the HTML User's Guide. For information about the default administrator password, refer to page 6-15. NOTICE NOTICE If this machine is turned off because the Weekly Timer has started, job data - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 17
bizhub PRO 1100 1.2 Available Operations in this Machine Major functions of this machine )Print functions You can print data on this machine via the printer driver using the application software installed on your computer. You can configure a layout or finish setting by implementing a simple action - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 18
(SMB server), FTP server, or WebDAV server, and save it to the USB flash drive installed on this machine. In addition, you can give a scan instruction from a computer on the network to import the scan data to your computer. FTP WebDAV )Hold function of print jobs using the HDD You can - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 19
bizhub PRO 1100 Application functions )Tone curve adjustment function (Color Centro) Color Centro is an application that enables efficient color management on your computer. To realize optimal printing - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 20
page for each step. Tips The User's Guide CD supplied with this machine includes a sample PDF file for printing. This file is helpful if you have no original data. Step 1: Prepare the printer driver and applications Install the printer driver and applications in your computer. After installation is - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 21
bizhub PRO 1100 Step 3: Configure information of the paper loaded into a tray in this machine Specify the type, size, weight, and other values of paper. For details, refer to page 4-6. Step 4: Use the printer driver guide describes a procedure example of how to print data using the PS Plug-in driver - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 22
In [Paper Tray], you can select a tray to load paper to be printed into. - For information about other functions of the printer driver, refer to the HTML User's Guide. % Click [Print]. Original data is printed, and printed sheets are output to the output tray of this machine. - You can save print - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 23
3 Installing Software 3.1 Installing the Printer Driver Operating environment bizhub PRO 1100 )In a Windows environment Item Operating System CPU Memory your operating system The memory must have a sufficient free space to support the operating system and required applications. CD or DVD drive ) - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 24
be configured on this machine before beginning the installation procedure. For details, refer to the HTML User's Guide. 0 To carry out this task, the computer's administrator privilege is required. " Insert the Driver CD into the CD or DVD drive of the computer. If the installer does not start, open - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 25
be found, click [Have Disk], then directly specify the [Setup.inf] file. ( Click [Finish]. If the [Windows Security] window is displayed, click [Install this driver software anyway]. Then, configure the default setting for the printer driver. For details, refer to page 3-4. bizhub PRO 1100 3 3-3 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 26
3.1 Installing the Printer Driver )Default setting Check that optional information of this machine is configured correctly on the printer driver. 0 If optional information of this machine is not configured correctly on the printer driver, you cannot use optional functions. If any optional function - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 27
bizhub PRO 1100 In a Macintosh environment )Installation Install the printer driver on your computer from the Driver CD supplied with this machine, then add the desired printer to the computer. This guide describes how to install the PS Plug-in driver in a Mac OS X 10.8 environment and add a Bonjour - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 28
3.1 Installing the Printer Driver ' When the installation has been completed, click [Close]. Then, add a the [Print & Scan]. ) Click [+]. If the menu appears, select [Add Printer or Scanner]. * Click [Default]. Connected printers are detected. If no printer is detected, restart this machine. 3-6 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 29
Setting]. For information about the default administrator password, refer to page 6-15. , Click [Add]. - Configure optional information of this machine, then click [OK] or [Continue]. Then, configure the default setting for the printer driver. For details, refer to page 3-8. bizhub PRO 1100 3 3-7 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 30
is not configured correctly on the printer driver, you cannot use optional functions. If any optional function is mounted, be sure to configure a setting. " Select a print command of the application, then select the required printer name from [Print]. # Select [bizhub PRO 1100PS] from the pull-down - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 31
bizhub PRO 1100 3.2 Installing Applications Operating environment )Color Centro Item Operating Memory capacity as recommended for your operating system The memory must have a sufficient free space to support the operating system and required applications. 1,024 e 768 pixels or more CD-ROM drive The - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 32
your computer. 1 2 3 4 5 6 7 Color Centro supports the following seven types of functions. No. Function 1 [Calibration] not available on this machine. This function specifies default of color conversion. You can manually specify default of color settings for RGB, CMYK, and 's Guide. 3-10 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 33
bizhub PRO 1100 )Installation Start the installer from the Color Centro CD-ROM , and then click [OK]. If .NET Framework 3.5 is not installed on the computer, follow the on-screen instructions to install it. % Click [Next]. & Check the license agreement, click [I accept the terms in the license - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 34
to a connection with a Java application server. For information about the default administrator password, refer to page 6-15. " Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Color Centro] - [KONICA MINOLTA Color Centro]. # Select a destination. If this machine is not - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 35
bizhub PRO 1100 Job Centro setup )Function overview / Job management Using Job Centro, you can remotely operate jobs saved on this machine. You can also edit jobs and - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 36
3.2 Installing Applications )Installation Start the installer from the Job Centro CD-ROM supplied with this machine, and then install Job Centro on your computer. 0 To install, the computer's administrator privilege is required. " Insert the Job Centro CD-ROM into the CD-ROM drive of the computer. - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 37
bizhub PRO 1100 )Start To start Job Centro, first connect it to this machine. 0 Job . For information about the default administrator password, refer to page 6-15. " Open the Start menu, and then click [All Programs] - [KONICA MINOLTA] - [Job Centro 2.0] - [KONICA MINOLTA Job Centro 2.0]. # Select - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 38
that only one tray can be withdrawn at a time in order to prevent the machine from tipping over. # Open the feed roller. $ Slide the rear guide plate to any position. % Place paper with the print side facing down. NOTICE NOTICE Do not load paper over the limit level indicated on the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 39
bizhub PRO 1100 & Align the side guide plates and rear guide plate to the paper. Align the stack of paper to the feed roller side of the tray. While pressing the side guide lock release lever, align both side guide plates to the paper. NOTICE NOTICE Securely press the side guide error. 4 4-2 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 40
the same for Tray 3 to Tray 5. Reference For information about how to load paper into other optional paper feeder unit, refer to the HTML User's Guide. " Pull out the tray to load paper into. NOTICE NOTICE Trays cannot be withdrawn when the machine is powered off. Turn the sub power switch - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 41
the side guide lock knobs (4 locations) of the side guide plates clockwise to fix them. bizhub PRO 1100 ' Load the remaining paper, then press the rear guide plate paper does not go beyond the limit mark , indicated on the side guide plates. If it does, a paper jam may be caused. Carefully load - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 42
close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the tray or paper weight, which may lead to a machine error. 4-5 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 43
bizhub PRO 1100 4.2 Paper Setting Specifying paper information for a tray Specify the required information (size, type, weight, and other values) for the paper loaded into a paper tray. When - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 44
4.2 Paper Setting % Press [Paper Size]. & Select one of the options under [Size Setting] to fit the paper loaded into the tray. 4-7 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 45
bizhub PRO 1100 ' Specify the size. [Standard]: Recognized automatically. (Not applicable to the Large Capacity Unit LU-411 or Large Capacity Unit LU-412) In [Detect Size Setting], - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 46
4.2 Paper Setting [Tab Paper]: Specify the paper size and the number of tabs. ( If you select [Detect Size Setting] in [Standard], press [OK]. This returns to the [Size Setting] screen. This step is not required if you select [Custom] or [Tab Paper]. ) Press [OK]. This returns to the [Change - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 47
* Specify other items, if necessary. bizhub PRO 1100 + Press [OK]. This returns to the [Paper Setting] screen. setting is then completed. Tips For details about setting items, refer to the HTML User's Guide. 4 Tips To register paper conditions in a paper profile, press [Register]. For details - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 48
how to set imaging from the printer driver. This guide describes a procedure example of how to print data using the PS Plug-in driver from Adobe Reader XI in Windows 7. )[Screening]: Select the fixed screen. On the print setting screen of the printer driver, open [Imaging], then select the [Image - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 49
bizhub PRO 1100 )[Screening]: Custom screen setting On the print setting screen of the printer driver, open [Imaging], then specify [Dot shape of a print dot. For details about the dot shape, refer to the printer driver help. [Screen Frequency] allows you to set the number of halftone dots per inch. - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 50
Tone curve setting On the print setting screen of the printer driver, open [Imaging], then select the [Image] and [Text/ can set on this machine, select the [Keep 100% Density for Text/Graphics] check box regardless of the tone curve setting. Reference Tone curves can be managed using [Tone Curve - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 51
5 Maintaining the Finishing Quality bizhub PRO 1100 5.1 Both Sides Adjustment Both Sides Adjustment When entering from [Paper Setting] and from [Both Sides] on the [MACHINE] screen. This guide describes how to enter from [Paper Setting] for adjustment. Reference For information about how to - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 52
marks. For details, refer to the HTML User's Guide. NOTICE NOTICE A high technical skill is required to adjust the reference position on the print side. Before carrying out this adjustment, contact your service representative. You can change the default screen of the [Both Sides Adjust] screen. For - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 53
" Press [Paper Setting] on the [MACHINE] screen. bizhub PRO 1100 # Select the tray with the target paper loaded, then press [Change Set]. $ Press [Both Sides Adj]. % Check that [Scan Meas.] is displayed, then press [Output Background Sheet]. 5 5-3 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 54
5.1 Both Sides Adjustment & When the [PRINT MODE] screen is displayed, press Start on the control panel. A background sheet is printed out. If you already have the background sheet available for measurement, you do not need to print out a background sheet. Proceed to Step 7. NOTICE NOTICE Use paper - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 55
on the control panel. Adjustment charts are printed on both sides of the paper in the tray you selected in Step 2. + Press [Exit Print Mode]. bizhub PRO 1100 , Press [2. Scan Adjustment Chart]. The [Scan Adjustment Chart] screen is displayed. 5 5-5 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 56
with the far end of the glass. Place the upper-left corner of the adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and horizontal size guide respectively on the original glass making sure that the left and top sides are parallel to the vertical size - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 57
Adjustment Chart] screen. The adjustment chart is scanned. bizhub PRO 1100 When scanning is properly completed, the counter of [ press [Close] in the message dialog box. - If scanning fails, a message may be displayed. Follow the on-screen instructions to correctly place the adjustment chart and - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 58
5.1 Both Sides Adjustment 0 Repeat the scanning steps 12 to 14 four times for every adjustment chart. - First time: Set the front side of the adjustment chart face up (turned away from the original glass), with its top edge positioned to the back side. - Second time: Set the front side of the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 59
. 2 After the adjustment is completed, press [OK]. To finely adjust the adjustment value, continuously proceed to step 4 in "Zoom and Image Shift Adjustment" (page 5-23). bizhub PRO 1100 5 5-9 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 60
5.1 Both Sides Adjustment 3 Press [Close] to exit the adjustment. Scan Measurement Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. 5-10 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 61
bizhub PRO 1100 )Gap Adjustment To adjust a gap, print out a chart, measure a gap between the front and back sides at the specified measurement point of the back side - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 62
5.1 Both Sides Adjustment % Select [Gap], then press [Print Mode]. & When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. ' Press [Exit Print Mode]. 5-12 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 63
bizhub PRO 1100 ( Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side of the printed out chart. - This figure - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 64
5.1 Both Sides Adjustment * When entry processing is completed, press [Adjustment Start]. The entered adjustment values are applied. + Press Start on the control panel. A test chart is printed out. , Check a gap of the printing position refering the printed out chart. Repeat steps 7 to 10 until all - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 65
is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. bizhub PRO 1100 5 5-15 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 66
5.1 Both Sides Adjustment )Chart Adjustment You can print out a Both Sides Adjustment chart, measure measurement points using a scale, and enter measurement values in order to carry out the adjustment. Using this function, you can only enter measurement values to carry out the both-side adjustment. - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 67
% Select [Front], then press [Chart Adjustment]. & Press [Print Mode]. bizhub PRO 1100 ' When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. ( Press [Exit Print Mode]. 5 5-17 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 68
5.1 Both Sides Adjustment ) Measure the line length at each of points [1] to [8] on the printed-out chart using a scale. - The figure on the right illustrates an example to measure points [1] and [5]. As illustrated in [5] [1] this example, measure the line length at each printed point. - The - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 69
entry processing is completed, press [Adjustment Start]. In the next step, adjust the back side. , Select [Back], then press [Chart Adjustment]. - Press [Print Mode]. bizhub PRO 1100 . When the [PRINT MODE] screen is displayed, press Start on the control panel. A test chart is printed out. 5 5-19 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 70
5.1 Both Sides Adjustment / Press [Exit Print Mode]. 0 Measure a misalignment between the marks of [1] to [4] printed on the [back] side of the output chart and the marks on the [front] side. >@ - The figure shows an example to measure [1]. The scale resolution is 0.5 mm. EDFN - In this - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 71
bizhub PRO 1100 1 Press [X] or [Y] at each point, and enter the measured value using the keypad, [,], or [+] on the screen. - If the printing position is misaligned to the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 72
5.1 Both Sides Adjustment 4 Press [Close] to exit the adjustment. Chart Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide. 5-22 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 73
bizhub PRO 1100 )Zoom and Image Shift Adjustment You can finely adjust the zoom ratio of the print side and the top, bottom, left, and right positions on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 74
5.1 Both Sides Adjustment % Press [Front] or [Back] to select the print side to be adjusted. & Enter the zoom ratio or the image shift value using the keypad, [,], or [+] on the screen or the Keypad on the control panel. - To specify the zoom ratio, press [Vertical] or [Horizontal], then enter a - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 75
, press [OK]. bizhub PRO 1100 ( Press [Close ] to exit the adjustment. Zoom and Image Shift Adjustment is then completed. - To register adjustment values in a paper profile, press [Register]. - For details about how to register a paper profile, refer to the HTML User's Guide - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 76
registered in the image controller can be adopted to the output. You can also specify a tone curve that is to be used from the printer driver for each job. 5-26 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 77
Adjusting a tone curve using Color Centro This guide describes how to adjust a tone curve using Color Centro. " Start Color Centro. For information about how to start Color Centro, refer to page 3-12. # Click [Tone Curve Adjustment]. bizhub PRO 1100 $ Click [Adjust Each Color]. - To adjust the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 78
5.2 Image Quality Adjustment & When adjustment is completed, click [Save]. ' Enter the name of the adjusted tone curve. In [Destination Folder], select [Controller], then click [Save]. If [Controller] is selected, data is saved in the image controller of this machine. ( When the Save Complete - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 79
bizhub PRO 1100 5.3 Adjusting the Finisher Opening the screen to be adjusted When the finisher or Z-folding unit is installed on this machine, you can finely adjust its - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 80
depending on the model of the mounted optional device. For details about the setting procedure, refer to the HTML User's Guide. Setting item [Staple Finisher Adjustment] [Z-Folding Unit Adjustment] Description Adjusts stapler operations such as staple positioning. Adjusts Z-folding unit operations - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 81
6 Troubleshooting bizhub PRO 1100 6.1 Replenish and Replace Consumables )Replacing a toner bottle WA RNIN G WARNNIINNGG Do not throw toner or a container that contains toner (e.g., toner cartridge and developing unit) into an open flame. The hot toner may scatter and cause burns or other damage. - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 82
Scrap Indicators] area on the touch panel to directly open the screen shown in step 3. # Press [Consumable/Scrap]. $ Follow the on-screen instructions to replace a toner bottle. - The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 83
bizhub PRO 1100 )Replenishing staple cartridge supply If the staple cartridge becomes empty, the message Finisher FS-532. For details about other ways to replenish staple cartridge, refer to the HTML User's Guide. " Press on the upper-right corner of the touch panel or Help on the control panel to - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 84
6.1 Replenish and Replace Consumables $ Press the [Add Stapler] tab of the target stapler, then follow the on-screen instructions to replace the staple cartridge. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,]. 6-4 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 85
bizhub PRO 1100 )Replacing a waste toner box WA RNIN G WARNNIINNGG NEVER throw the waste toner box into a fire. - Otherwise, the toner may ignite and cause a dangerous situation. If the waste toner box becomes full of waste toner, the message [Waste toner box is full / Please replace the box] is - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 86
6.1 Replenish and Replace Consumables # Press [Consumable/Scrap]. $ Press the [Waste Toner] tab, then follow the on-screen instructions to replace the waste toner box. The number on the right-hand side of the help message indicates a replacement procedure. To display the next step, press [,]. 6-6 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 87
bizhub PRO 1100 6.2 Clearing Paper Jams How to view the animation guide If a paper jam occurs on this machine, the message [Paper JAM / Please remove paper following the guide] is displayed, and the position of the paper jam is displayed on the screen. Check the paper jam position, then follow the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 88
6.2 Clearing Paper Jams )Illustration screen for Jam handling The overview of the method required to clear the jam is displayed on the [JAM Position] screen. Changing to the Illustration screen displays the procedure guidance, so you can clear a paper jam while checking each step. " Press [ - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 89
press [Close]. This returns to the [MACHINE] screen. bizhub PRO 1100 Tips If the paper jam message has not been yet panel. If you cannot smoothly remove jammed paper, do not remove it forcibly. Contact your service representative. - Open and close the door of the part indicated by the number on - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 90
printing, the message [Please load designated xxx paper / To check details, touch [Confirm Details]] is displayed on the screen. To address this problem, load the specified paper into a tray, or you can forcibly print on the currently loaded paper of a different size. )Replacing with the specified - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 91
% Replace paper into the tray, then press [OK]. bizhub PRO 1100 & Press Start on the control panel. Printing starts using the selected tray. 6 6-11 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 92
6.3 If the Specified Paper is not Found )Forcibly printing using the loaded paper " Press [Confirm Details] on the [MACHINE] screen. # Select a tray with print paper loaded, then press [Forced Output]. $ Press Start on the control panel. Printing starts using the selected tray. 6-12 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 93
Error] is displayed in [Send History] on the [JOB LIST] screen. Check the free space on the HDD (image controller area). bizhub PRO 1100 TWAIN driver. For details, refer to the user's guide for the HDD TWAIN driver. HTML User's Guide. For information about the default administrator password, refer to - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 94
tones you were able to obtain before, and images may not be printed as expected. In such cases, adjustment is required. Setting by the printer driver Specify [Screening Method] or [Tone Curve] to adjust the image quality. Reference For details, refer to page 4-11. Adjusting the tone curve by Color - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 95
bizhub PRO 1100 6.6 Image Position Adjustment The previously adjusted image position may be 5-1. 6.7 If you forget the administrator password The administrator password is set to "00000000" by factory default. If the administrator password is changed, contact your service representative. 6 6-15 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 96
the screen. Enter a search keyword into the search field, then click [Search]. Tips For functions on which you refer to the HTML User's Guide in this guide, enter the function name or setting item into the entry field, then click [Search]; you can search for the target explanation. )(2) Confirm the - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 97
Name of each Component External components bizhub PRO 1100 No. Name 1 ADF (Reverse automatic document feeder) 2 Toner supply door 3 Sub power switch 4 Touch panel 5 Control panel 6 Right side door 7 Tray 1 8 Tray 2 9 Front door 10 Waste toner box replacement door 11 Left side - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 98
port is available for low-power devices only. Please provide an external supply of power for devices that require a large amount of power. 13 Service port (USB 2.0 Type B e 1) Connect this machine to the computer using a USB cable in order to use it as a local printer. 14 Network port (10Base - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 99
Internal components bizhub PRO 1100 No. Name 1 Main power switch 2 Toner bottle 3 Knob[M2] 4 Conveyance fixing unit 5 Lever[M4] 6 Drum unit 7 Fixing unit Description Used only by service representative to turn the machine power on/off. Be sure not to turn it off in usual operation - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 100
guide plates. Aligned to the rear edge of loaded paper. Collects waste toner. WARNING WARNNIINNGG NEVER throw the waste toner box into a fire. - Otherwise, the toner trouble. Please do not try to work yourself, but contact your service representative. CAUTION CAUTION DO NOT pull out the toner - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 101
Layout bizhub PRO 1100 20 19 18 17 16 No. Name 1 Keypad 2 Reset 3 Power LED 4 Data LED 5 Interrupt 6 Stop 7 Proof Copy 8 Start 9 Start LED 10 C (Clear) 1 2 3 4 5 6 7 15141312 11 10 9 8 Description Enters numeric values. Returns the copy conditions to the default settings - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 102
. Deactivates the power-saving mode. Also, activates power-saving mode manually when pressed. Lights when any power-saving mode is activated, or [Service Call] screen is displayed and output cannot be continued any more. - Otherwise, an unexpected trouble may be caused. Write down the report code as - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 103
bizhub PRO 1100 7.3 Convenient Use of Scan Function (Scan to SMB) You can send OS X 10.7 or later, the appropriate setting is required. For details, refer to the HTML User's Guide. Step 1: Prepare the destination computer In Step 1, execute the following tasks: - To check the destination computer - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 104
] tab. On the opened window, select the [Share this folder] check box. & Set [Permissions]. Click [Permissions] on the [Advanced Sharing] window, Select the user name added in step 6, and select the [Change] check box under Allow in Permissions, then click [OK]. )In a Macintosh environment Tips - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 105
bizhub PRO 1100 $ Enable the SMB-base sharing. Click [Options] on the [Sharing] window, select the [Share files and folders using SMB (Windows)] check box, then select the check box Guide. For information about the default administrator password of steps required to manually enter destinations. - - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 106
to be used. Some optional devices are not supported in certain regions. Machine Specifications Operating environment conditions Main 18.23" Tab paper: A4T w/v, 8.5 e 11T w/v For details, refer to the HTML User's Guide. Fine, Plain, Book/News, Embossed, Blank Insert: 40 g/m2 to 300 g/m2 / 10 lb - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 107
bizhub PRO 1100 Feeding-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Paper Feeder Unit PF-709 Paper tray 1 2 3 1: Tray 3 (upper - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 108
176 mm to 229 mm / Widthwise 9.84" to 12.36", Lengthwise 6.93" to 9.02" Tab paper: A4T v, 8.5 e 11T v For details, refer to the HTML User's Guide. 4,500 sheets (80 g/m2 / 21 lb Bond) )Large Capacity Unit LU-412 Paper tray Specifications Paper weight Paper size Paper tray capacity 40 g/m2 to - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 109
bizhub PRO 1100 )Multi Bypass Tray Unit MB-507 For Multi Bypass Tray Unit MB-507 to function, it should be attached to Large Capacity Unit LU-411 or Large Capacity Unit LU-412. It cannot be used along with a paper feeder unit. For details, refer to the HTML User's Guide. Paper tray 1 1: Multi - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 110
for paper to be fed from the lower tray (the configurable function varies depending on finisher models). For details, refer to the HTML User's Guide. Paper tray 21 1: Upper tray 2: Lower tray Specifications Paper weight Paper size Upper tray Lower tray Paper tray capacity 50 g/m2 to 300 g/m2 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 111
bizhub PRO 1100 Output-related optional devices Reference The paper size and weight vary depending on conditions such as setting or finishing. For details about the detailed conditions or specifications, refer to the HTML User's Guide. )Finisher FS-532 To use the punch function, the Punch Kit PK- - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 112
7.4 Major Specifications Specifications: Staple Maximum stapling capacity Stack capacity Weight Plain Fine Others 50 g/m2 to 74 g/m2 / 14 lb Bond to 19 lb Bond 75 g/m2 to 80 g/m2 / 20 lb Bond to 21 lb Bond 81 g/m2 to 91 g/m2 / 22 lb Bond to 24 lb Bond 92 g/m2 to 135 g/m2 / 25 lb Bond to 36 lb - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 113
bizhub PRO 1100 Specifications: Punch (Punch Kit PK-522) Number of punch holes Metric area: 2 holes / 4 holes, Swedish 4 holes (Available only in Sweden) Inch area: 2 holes / 3 holes Hole - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 114
Conveyance Unit Function Punch The punch-hole pattern varies according to the die set. For details, refer to the HTML User's Guide. Specifications Function Paper weight Paper size Bypass mode • Transports paper without punch processing. Punch mode • Carries out punch processing through a punch - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 115
bizhub PRO 1100 Specifications Book size (sheets) Bypass sheet size/weight Smallest: 5 body sheets (75 g/m2 / 20 lb Bond) + 2 covers (216 g/m2 / 57 lb Bond) Largest: 100 body - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 116
7.4 Major Specifications Electronic optional devices Reference For information about optional devices not described below, refer to the HTML User's Guide. )Removable Hard Disk Kit RH-101 Specifications Function Pull out the HDD for the main body, and install it in the inner case supplied with - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 117
bizhub PRO 1100 7.5 Weight for each size NOTICE NOTICE The product specifications are subject to a change without notice. )Weight for each size The paper weight (g/m2 / lb Bond) - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 118
Crosswise direction: 313.9 mm / 12.36" Paper feed direction: 458 mm / 18.03" Tips For information about other paper trays, refer to the HTML User's Guide. 7-23 - Konica Minolta bizhub PRO 1100 | bizhub PRO 1100 Quick Guide - Page 119
http://www.konicaminolta.com A799956111 © 2015 Printed in China 2016. 3
Before Getting Started
Let's Make Prints
Installing Software
Basic Operations
Maintaining the Finishing Quality
Troubleshooting
Appendix
1
2
3
4
5
6
7
Quick Guide