Konica Minolta magicolor 1650EN magicolor 1650EN User Guide - Page 169

Konica Minolta magicolor 1650EN Manual

Page 169 highlights

This message... means...The printer is processing data. The printer is being started up. The IEEE802.1x port is being authorized. The printer is warming up. The printer is adjusting the toner distribution. do this...No action needed. PROCESSING magicolor 1650 STARTING PRINTER PORT AUTH ACTIVE WARMING UP REFRESHING Error Messages (Warning) This message...means...Tray 1 is empty. do this...Load the media into Tray 1, and then press the Menu Select key. Remove the misfed media. CHECK TRAY1 PAPER (Displaying alternately) PRESS MENU/SELECT I/C END Media has misfed in Tray 1. The imaging cartridge Replace the imaging has reached the end cartridge. of its life. Printing can continue, however, the printing result are not guaranteed. If printing is continued, the message "I/C LIFE END" appears and printing stops. The imaging cartridge Prepare a new imaging is near the end of its cartridge. life. Tray 2 is empty. Load the media into Tray 2. I/C LOW TRAY 2 IS EMPTY 8-32 Status, Error, and Service Messages




Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Konica Minolta magicolor 1650EN Manual