Konica Minolta Fujitsu fi-6800 Operating Guide - Page 177
Scanner, Size Detection, specify
View all Konica Minolta Fujitsu fi-6800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Chapter 9 Operational Settings Item Description Setting/Value Factory Default SCSI or USB SCSI or USB Connector 1 Connector 2 3: Configurable -: Not configurable Retain current Specify whether or not to keep the Remember / Do not remember Do not remember 3 3 paper thickness operator panel's paper separation force setting upon turning the power off. Cleaning Cycle Specify the cycle for cleaning the 1,000 to 255,000 sheets 10,000 sheets 3 3 scanner. (in increments of 1,000) Also specify whether or not to show [Show cleaning instructions.] check box Not selected a message for cleaning from the scanner driver. Life Counter Alarm Specify the replacement cycles for Each consumable 600,000 sheets 3 3 Setting the consumables. 10,000 to 2,550,000 sheets (in increments of 10,000) Set the interval for feeding sheets If the bottom of the scanned image is partially missing due to a large skew when scanning in Automatic Page Size Detection, specify a longer interval to feed the documents. Specifying a longer interval leaves more time between each document to be scanned. Short (default) - Long (1 to 4 levels) Short (default) 3 3 Pick Speed When multifeeds or paper jams occur frequently, the symptom may be improved by slowing down the speed (pick speed) in which the documents are fed. It can also be configured from the operator panel. Normal / Slower Normal 3 3 TOP Contents Index Introduction Scanner Overview How to Load Documents Configuring the Scan Settings How to Use the Operator Panel Various Ways to Scan Daily Care Replacing Consumables Troubleshooting Operational Settings Appendix Glossary 177