Konica Minolta bizhub 223 bizhub 423/363/283/223 Network Administrator User Gu - Page 86
In Print Server mode using the NetWare 4.x Bindery Emulation, In NetWare 4.x Remote Printer mode NDS - quick start
View all Konica Minolta bizhub 223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
5.7 Printing (Netware) 5 Item [IPX Setting] [Ethernet Frame Type] [NetWare Print Mode] [Print Server Name] [Printer Number] Description Select [ON]. Select a frame type to be used. Select [Nprinter/Rprinter]. Enter a print server name to be operated as the Nprinter/Rprinter (up to 63 characters, excluding Enter the Nprinter/Rprinter number. Prior check Frame type The print server name specified in Step 4 In Print Server mode using the NetWare 4.x Bindery Emulation 0 When you use the Bindery Emulation, make sure that the Bindery Emulation has been enabled on the NetWare server. 0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server. 1 From the client, log in the NetWare file system as Bindery with the administrator authority. 2 Start Pconsole. 3 Select [Quick Setup] from [Available Options] list box, and press the Enter key. 4 Fill in [Print Server Name], [Printer Name], and [Print Queue Name]. Set the [Type] of the printer to [Oth- er/Unknown], and save them. 5 Terminate Pconsole by pressing the Esc key. Then, configure the following settings in [NetWare Setting]. Item [IPX Setting] [Ethernet Frame Type] [NetWare Print Mode] [Print Server Name] [Print Server Password] [Polling Interval] [Bindery/NDS Setting] [File Server Name] Description Select [ON]. Select a frame type to be used. Select [PServer]. Enter a print server name to be operated as Pserver (up to 63 characters, excluding Enter a print server password if necessary (up to 63 characters). Set a job inquiry interval. Select [NDS/Bindery Setting]. Enter the priority file server name to be used in the Bindery emulation mode (up to 47 characters, excluding Prior check Frame type The print server name specified in Step 4 In NetWare 4.x Remote Printer mode (NDS) 1 From the client, log in the NetWare file system with administrator authority. 2 Start NWAdmin. 3 Select an organization or department container for the print service, and select [Print Services Quick Setup] from the Tools menu. bizhub 423/363/283/223 5-14