Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 144
Media Adjustment], Center Staple Position]
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
7.1 [System Settings] 7 [Media Adjustment] Adjust defective print images caused by paper type features. 1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Printer Adjustment] ö [Media Adjustment]. 2 Select a paper type to be adjusted. % If defective images exist on the back side of 2-sided copy paper, select [2nd Side]. 3 Press [+] or [-] to specify an adjusted value. % If missing parts or white spots exist in print images, press [-]. If the surface of the print image is rough, press [+]. 4 Press [OK] ö [Close]. 5 Copy, and then check the print image. [Center Staple Position] Adjust the stapling position for each paper size when printing with the center staple function. 0 Adjust the half-fold position before adjusting the center stapling position. 0 Before making any adjustments, create a sample using the center staple function. Adjust the center sta- ple position while checking the created sample. 0 This adjustment is available if the Saddle Stitcher SD-509 is installed. 0 When stapling in parallel with the left edge of paper, contact your service representative. 1 Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Center Staple Position]. 2 Select the size of paper of which the center staple position is adjusted. 3 Press [+] or [-] to adjust the staple position while checking the sample. 4 Press [OK]. 5 Create a sample, and check the print result. d Reference To adjust the half-fold position: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Half-Fold Position]. bizhub 423/363/283/223 7-12