Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 173

7.9 [System Connection] 7 7.9 [System Connection] Configure settings for software, cellular phone, or PDA that can be accessed with this machine. % Press Utility/Counterö[Administrator Settings]ö[System Connection]. Settings [OpenAPI Settings] [Access Setting] [SSL/Port Settings] [Authentication] Specify whether to allow the user to access this machine from other system that is using OpenAPI. [SSL Setting] To use SSL encryption, select [SSL Only] or [SSL/Non-SSL]. • If [Enhanced Security Mode] is ena- bled, [SSL Only] is enabled. [Port No.] Enter a port number. [Port Number (SSL)] Enter the port number to be used for SSL communication. [Client Certificate] Specify whether to request for client certificates. If you authenticate the client by requesting for its certificate (verification of client certificate), select [Enable]. [Certificate Verification Level Settings] To verify a certificate, configure settings to verify the certificate. [Expiration Date]: Select whether to check that the target certificate is within the validity period. [Key Usage]: Select whether to check that the certificate key is being used properly. [Chain]: Select whether to check that the certificate chain (certification path) is correct. [Expiration Date Confirmation]: Select whether to check the target certificate for validation. [CN]: Select whether to check that the CN of the certificate matches the server address. Specify whether to authenticate an access from other system that is using OpenAPI. • To authenticate, enter the login name and password in [Login Name] and [Password]. • When user authentication is performed or when acquiring the device information with the PageScope Authentication Manager, set the Authentication setting of the OpenAPI Setting screen of the machine to [OFF]. bizhub 423/363/283/223 7-41