Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 234
Using authentication unit IC card type, Data Administrator, Main Power Switch
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
11.1 Using authentication unit (IC card type) 11 User registration To register a user with Data Administrator, connect the authentication unit to the USB port of the computer, and also connect the computer to this machine via network. 1 If the authentication unit is already connected to this machine, turn the Main Power Switch of this ma- chine off, and then disconnect the authentication unit. % When the authentication unit is already connected to the computer, go to step 4. NOTICE To turn the Main Power Switch off and on, first turn the Main Power Switch off, and then turn it on after 10 or more seconds has elapsed. Not doing so may result in an operation failure. When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be damaged or a failure may occur. 2 Turn on the Main Power Switch of this machine. 3 Connect the authentication unit to the USB port of the computer that contains Data Administrator. NOTICE Do not connect another USB device to the same port as for the authentication unit. Doing so reduces the USB power supply, resulting in an operation failure. To use the USB hub, be sure to connect the self-power USB hub that supplies 500 mA or more. Restart the procedure 5 or more seconds after connecting the authentication unit. 4 Data Administrator starts, and device information of this machine is imported. The Device Information window appears. % For details on how to import device information, refer to the Data Administrator User's Guide. bizhub 423/363/283/223 11-11