Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 69
Separate Scan]
View all Konica Minolta bizhub 363 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
5.1 [Basic] 5 5.1.6 [Separate Scan] When the original contains pages exceeding the capacity of the ADF, you can divide the original into several batches to handle each lot as a single copy job. You can also use the copy function by switching between the ADF and the Original Glass for scanning the originals. 0 Do not load original sheets beyond the upper limit for the ADF. It would cause jamming and/or spoiling of the original or failure of the machine. 0 When making 2-sided or combined copies using the Original Glass, the machine can scan a number of original pages without enabling Separate Scan. 1 Load the original. 2 Press [Basic] ö [Separate Scan]. 3 Press the Start key. The original is scanned. 4 Load the next batch of the original, and then press the Start key. % To change the scanning settings, press [Change Setting]. 5 Repeat Step 4 until all pages of the original are scanned. 6 After all original pages have been scanned, press [Finish]. 7 Press the Start key. d Reference To set the Separate Scan output method: Press the Utility/Counter key ö [User Settings] ö [Copier Settings] ö [Separate Scan Output Method]. bizhub 423/363/283/223 5-13