Konica Minolta bizhub 363 bizhub 423/363/283/223 Copy Operations User Guide - Page 71

5.2 [Original Setting] 5 5.2 [Original Setting] Configure the original status or original direction for outputting desired copies. % Press [Original Setting]. Settings [Mixed Original] [Z-Folded Original] [Original Size] [Binding Position] [Original Direction] [Despeckle] Loads originals of different sizes into the ADF and scan them at a time. Correctly detects the original size when folded originals are loaded into the ADF and copied. Select [Auto] to detect the size of the original automatically. If the size of the original is not automatically detected, select the original size. [Custom Size] Enter the original size. [Photo Size] Select the photo size. Specify the original binding position (page margin) to prevent the copy from being printed upside-down when scanning a 2-sided original. [Auto] Automatically configures the binding position of the original. • A page margin position along the long side of the paper is selected if the original length is 11-11/16 inches (297 mm) or less. • A page margin along the short side of the paper is selected if the original length exceeds 11-11/16 inches (297 mm). When copying double-sided originals or making double-sided or combined copies, press this button to specify the direction in which the original is loaded into the ADF or placed on the Original Glass. Reduces the influence of a dirt of the Slit Scan Glass upon a copy output when loading an original in the ADF. bizhub 423/363/283/223 5-15