Konica Minolta bizhub 601 bizhub 751/601 Print Operations User Manual - IC-208 - Page 253
Unable to specify desired settings or unable to print as specified - envelope
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Troubleshooting 14 14.2 14.2.1 Unable to specify desired settings or unable to print as specified Perform these troubleshooting procedures if you cannot specify the desired settings in the printer driver, or if the print results do not represent the settings that have been specified. 2 Note Some of the printer driver functions cannot be combined with other functions. Printer driver settings have no effect Symptom A printer driver setting cannot be selected. A "Conflicts" message with "Unable to Select" or "Function Canceled" appears. Printing is not performed as specified. The watermark cannot be printed. The staple function cannot be specified. Stapling cannot be performed. The stapling position is not as expected. The Punch function cannot be specified. The pages are not punched. The hole punch position is not as expected. The overlay is not printed properly. Images are not printed properly. Cause Some functions cannot be combined. An incorrect combination of functions has been specified. Incorrect settings may be specified. Function settings can be combined in the printer driver, but not on this machine. The paper size, orientation, and other settings specified in the application may have priority over those specified in the printer driver. The watermark may not be correctly set. The watermark density may be set to a level that is too low. Watermarks cannot be printed in graphics applications in some cases. Stapling is not possible if "Paper Type" is set to "Thick" or "Transparency". The Staple function requires optional finisher. When printing a large number of pages, stapling cannot be performed. Stapling is not possible if the document contains pages of different sizes. The orientation setting is not correct. Hole punching cannot be specified if "Booklet", "Transparency", "Thick2", "Thick3", or "Envelope" is selected. Optional finisher and a punch kit or Z folding unit are required. Printed pages may be fed out without being punched if the paper is loaded into the paper source with an incorrect orientation. The orientation setting is not correct. Available computer memory space may be insufficient. Available computer memory space may be insufficient. Remedy Do not try to select settings that are not available. Check the settings and specify the functions correctly. Check each setting in the printer driver. Specify the correct settings in the application. Check the watermark settings. Check the density settings. No watermark can be printed if that is the case. Check each setting in the printer driver. Install the required optional finisher and enable it using the printer driver. Change the number of pages to be printed. Check the document. Check the stapling position in the printer driver setup dialog box. Check each setting in the printer driver. Install the required optional finisher and enable it using the printer driver. Check the orientation setting. Check the stapling position in the printer driver setup dialog box, and then print. Simplify the overlay to reduce the data size. Simplify the images to reduce the data size. IC-208 14-4