Konica Minolta bizhub 601 bizhub 751/601 Print Operations User Manual - IC-208 - Page 48
Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open]
View all Konica Minolta bizhub 601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Manual installation using the Add Printer wizard 4 5 Click "Add a network, wireless or Bluetooth printer". - If the printer is not detected, turn off this machine, then on again. - When turning off the power, then on again, wait at least 10 seconds before turning it on again. Otherwise, this machine may not function properly. The connected printers are detected. 6 Select this machine from the list, and then click the [Next] button. - When using the LPR/Port9100 protocol, select the printer having its IP address. - When using an SMB connection, select the printer having its "\\NetBIOS name\print service name". - When using the SMB connection, click [Next], and then click [OK] in the "Connect to Printer" window that appears. - It may take some time to finish searching the entire list of printers. 7 Click the [Have Disk] button. 8 Click the [Browse] button. 9 Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [Open] button. - Select the specified folder according to the printer driver to be used, the operating system, and the language. Printer drivers that can be selected: PCL driver, PS driver, XPS driver, fax driver - For details of the built-in CD-ROM construction, see "Contents of CD-ROM" on page 1-9. - For details on fax drivers, refer to the User's Guide [Fax Driver Operations]. IC-208 4-13