Konica Minolta bizhub C35 bizhub C35 Facsimile User Guide - Page 36
Double], Description, Until Transmission Complete]: The line monitoring
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Item [Redial] [Redial Interval] [Line Monitor] Description Settings [0] - [10] ([1]) Specify the number of times this machine automatically redials when a fax could not be sent correctly, for example, if the line is busy or a communication error occurred. " The available settings and the default setting differ depending on the setting selected for [Admin Settings] - [Fax Settings] - [Fax Target]. Settings [2] - [15] ([2]) Select the length of the interval (in minutes) between redial attempts when the machine automatically redials. " The available settings and the default setting differ depending on the setting selected for [Admin Settings] - [Fax Settings] - [Fax Target]. Settings [OFF] / [Until Connection Complete] / [Until Transmission Complete] Select whether the line monitoring tone is produced during communication. [OFF]: No line monitoring tone is produced. [Until Connection Complete]: The line monitoring tone is produced until the connection with the destination has been completed after dialing. [Until Transmission Complete]: The line monitoring tone is produced until the fax transmission has been completed after dialing. [Line Monitor Volume] Settings [Low] / [Medium] / [High] Select the volume of the line monitoring tone. [Ring Pattern] Settings [Normal Ring] / [Double] / [Triple 1] / [Triple 2] Select the ring pattern for faxing when [RX Mode] is set to [DRPD]. " For details on the settings, refer to "[Ring Pattern]" on page 4-4. [Fax Settings] (Admin Settings) 2-11