Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 130
Thick Stock, Capacity, Tray 1/2, Orientation, Driver, Media Type, Weight, Duplexing - support
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
" Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet media. Layered Adhesive Folded, creased, curled, embossed, warped, or wrinkled Perforated, three-hole punched, or torn Too slick, too coarse, or too textured Different in texture (roughness) on the front and back Too thin or too thick Stuck together with static electricity Composed of foil or gilt; too luminous Heat sensitive or cannot withstand the fusing temperature (180°C [356°F]) Irregularly shaped (not rectangular or not cut at right angles) Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons Acidic Any other media that is not approved Thick Stock Paper thicker than 90 g/m2 (24 lb bond) is referred to as thick stock. You can print continuously with thick stock. However, this could affect the media feed, depending on the media quality and printing environment. If problems occur, stop the continuous printing and print one sheet at a time. Capacity Tray 1/2 Up to 20 sheets, depending on their thickness Tray 3/4 Not supported Orientation Tray 1 Face down Tray 2 Face up Driver Thick 1 (91-150 g/m²) Media Type Thick 2 (151-210 g/m²) Weight 91 to 210 g/m² Duplexing Refer to "Specifications" on page 4-2. Print Media 4-5