Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 331
Solving Other Problems
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Solving Other Problems Symptom Cause Solution Machine power is not on. The power cord is not Turn off the machine, confirm that the correctly plugged into power cord is correctly plugged into the outlet. the outlet, and then turn on the machine. Something is wrong with the outlet connected to the machine. Plug another electrical appliance into the outlet and see whether it operates properly. The power switch is Turn the power switch off (O position), not correctly turned then turn it back to the on (I position). on (I position). The machine is con- Use a power source with the specificanected to an outlet tions listed in appendix A, "Technical with a voltage or fre- Specifications." quency that does not match the machine specifications. The control One of the toner car- Remove the toner cartridges and panel dis- tridges may be defec- check for damage. If it is damaged, plays [Toner tive. replace it. is low.] much Printed with heavy sooner than toner coverage. expected. See specifications in Appendix A. Cannot print The tray is empty. Check that at least Tray 1 is loaded the machine with media, in place, and secure. status list. There is a media mis- Clear the media misfeed. feed. 13-26 Solving Other Problems