Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 337
set too dark., Select a lighter copy density.
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
Symptom Cause Solution Image is too Laser lens is dirty. light; there is The copy density is low image set too light. density. The media is moist from humidity. Clean the laser lens. Select a darker copy density. Remove the moist media and replace with new, dry media. There is not much toner left in the cartridge. Replace the toner cartridge. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. Media type is set incorrectly. When printing envelopes, labels, letter head, postcards, thick stock, glossy media, single side only paper or special paper, specify the appropriate media type in the printer driver. Image is too The copy density is Select a lighter copy density. dark. set too dark. The document was not pressed close enough against the original glass. Position the document so that it is pressed close enough against the original glass. For details on positioning the document on the original glass, refer to "Placing a document on the original glass" on page 4-36. One or more of the Remove the toner cartridges and toner cartridges may check for damage. If it is damaged, be defective. replace it. One or more of the Remove the imaging units and check imaging units may be for damage. If it is damaged, replace it. defective. 13-32 Solving Problems with Printing Quality