Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 348
Replenish paper], Paper Size/Type, Mismatch], Output Tray Full], Memory Full], Stored Job Error]
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
Message Cause Solution [Replenish paper] [Replenish paper in Tray x or select other paper tray.] There is no paper in the paper tray selected for printing. (when [Auto Tray Switching] is set to [OFF]) Load paper into the specified paper tray. [Paper Size/Type The type and size of Mismatch] the paper loaded into [Load the following paper in tray x.] all of the paper trays are different. (when [Auto Tray Switching] [Paper : xxxxx xxxxx] is set to [ON]) Load the specified paper into a paper tray. [Output Tray Full] [Output tray full. Remove paper from the tray.] The output tray is full Remove the paper from of paper. the output tray. [Memory Full] [Insufficient memory Cancel the job.] The print data sent Cancel the job. from the computer has caused the memory to become full. [Stored Job Error] [Stored job specification not correct.] [Tray x] Tray 3/Tray 4 was Install Tray 3/Tray 4, or specified for printing a install the memory that stored job when Tray had been installed 3/Tray 4 is not when the job was installed on the stored. machine. When trying to print a stored job, the installed memory had been changed since the job was stored. [Job Registration Limit Over] [Registered jobs reached limit.] [Wait for job registration to complete.] Copy, scan or fax transmission operations were repeated while printing or transmissions could not be performed. Wait a while. The error is canceled. Status, error and service messages 13-43