Konica Minolta bizhub C35 bizhub C35 Printer/Copier/Scanner User Guide - Page 378
Associating the user with card using authentication device, Logging in to this machine, device
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 378 highlights
12 If the authentication device is already connected to the computer, remove it, turn the main power of this machine off, and then connect the authentication device to this machine. " To turn the power switch of this machine off and on, first turn the main power switch off, and then turn it on after 10 or more seconds has elapsed. Not doing so may result in an operation failure. " When connecting or disconnecting the USB cable, hold the plug. Oth- erwise, the cable may be damaged. If you only enter the card ID when registering a user, associate the user with card using the authentication device connected to this machine. Associating the user with card using authentication device When a user and card ID have been registered using Data Administrator, the user must be associated with the card in the Administrator Settings of the machine. 1 Press [Utility/Counter] key on the control panel of this machine to switch to the [Admin Settings] screen. 2 Press [Authentication Setting]. 3 Press [Card Authentication]. 4 Select a user to be registered, and press [OK]. - Press [All] to display all users. Press [Search] to extract target users with search characters. 5 Press [Edit]. - Press [Delete] to cancel the registration when IC card information is already registered. 6 Place the IC card on the authentication device, and press [OK]. - This associates the user with the IC card and registers the IC card for the user. Logging in to this machine The following explains how to log in to this machine with IC card authentication. To perform IC card authentication, register the information recorded in the IC card in advance. Logging in to this machine 15-15