Konica Minolta bizhub C35 bizhub C35 Reference Guide - Page 182
Displaying the [Ethernet] screen - default admin password
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Displaying the [Ethernet] screen From the [Ethernet] screen (Admin Settings), specify various network settings for the machine. From the Admin Settings screen, various settings are available to be changed by the machine administrator. In order to display the Admin Settings screen, the user must log on using the administrator password. 1 Press the [Utility/Counter] key. 2 Press [Admin Settings]. 3 Type in the administrator password (Default: 12345678), and then press [OK]. " If the administrator password is incorrectly entered three times, machine operations are locked. If this occurs, turn the machine off, then on again. 4 Press [Ethernet]. " Restart the machine if any of the following Ethernet settings are changed. [TCP/IP] - [Enable] [TCP/IP] - [DHCP] [TCP/IP] - [BOOTP] [TCP/IP] - [ARP/PING] [TCP/IP] - [SLP] [TCP/IP] - [SNMP] [TCP/IP] - [IPv6] - [Enable] [TCP/IP] - [IPv6] - [Auto Setting] [Netware] [IEEE802.1X] Displaying the [Ethernet] screen 5-3