Konica Minolta bizhub C35 bizhub C35 Reference Guide - Page 262

If the bit number differs between the server operating system and client operating system If the bit number differs between the print server's running operating system and client computer's running operating system while Windows Server 2008/ Server 2008 R2 is running on the print server, the additional driver may not be installed correctly on the print server. To solve this problem, specify the setup information file (ntprint.inf) of the operating system with a different bit number when installing the additional driver on the print server. The following describes how to install the additional driver by specifying a setup information file in a different computer from that the print server. " - Before starting this procedure, prepare to configure a different client computer from that of the print server and install the operating system that has a bit number different from that of the print server. - On the print server side, the system drive of the client computer is assigned as the network drive. Configure the setting to share the drive to be assigned in advance. Installing the Additional Driver As an example, the following procedure describes the operations performed when Windows Server 2008 (32 bits) is running on the print server and Windows Vista (64 bits) is running on the client computer. 1 Specify the client computer (64 bits) drive installed with the operating sys- tem (normally, drive C) as a shared drive. " This setting is available for only PostScript driver. Network Printing 7-35